Service Manuals, User Guides, Schematic Diagrams or docs for : ONKYO Audio CR-N755 onkyo_cr-n755_sm
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download onkyo_cr-n755_sm documenatation <<Text preview - extract from the document CR-N755
Ref. No. 4418
102012
CD Receiver
MODEL CR-N755(B/S)
Black and Silver models
B MPP/MPB 230V AC, 50Hz
S MPP
RC-850S
B MDC 120V AC, 60Hz
CR-555/555DAB/N755
Service Procedures - 1
WARNING
WARNING: WARNING AVIS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR DO NOT OPEN NE PAS OUVRIR
MOISTURE. The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
CAUTION: "dangerous voltage" within the product's enclosure that may be of
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT sufficient magnitude to constitute a risk of electric shock to persons.
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
The exclamation point within an equilateral triangle is intended to alert
PARTS INSIDE. REFER SERVICING TO QUALIFIED
the user to the presence of important operating and maintenance
SERVICE PERSONNEL.
(servicing) instructions in the literature accompanying the appliance.
LASER CAUTION
This unit contains a semiconductor laser system and is classified as a The label on the right is
"CLASS 1 LASER PRODUCT". So, to use this model properly, read applied on the rear
this Instruction Manual carefully. In case of any trouble, please contact panel except for USA "CLASS 1 LASER
the store where you purchased the unit. To prevent being exposed to the and Canadian models. PRODUCT "
laser beam, do not try to open the enclosure.
CAUTION:
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK 1. This unit is a CLASS 1 LASER PRODUCT and employs a laser
FAILED OR DEFEATED. DO NOT STARE INTO BEAM. inside the cabinet.
2. To prevent the laser from being exposed, do not remove the
cover. Refer servicing to qualified personnel.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
LASER DIODE
Never look at the laser light beam through the objective lens. T he visible laser beam may harm
the human eye. Use an appropriate viewer or TV camera to observe the laser beam.
Any laser diode will be damaged by a large current or pulse. Avoid current surges and
electrostatic discharges. Safety grounding of the human body and all measuring equipment, jigs
and tools is absolutely necessary. T he use of a grounding mat on the workbench and floor is
necessary. Even a small electrostatic discharge from the human body may destroy the laser
diode instantaneously or reduce its life time.
The pins of the laser diode may be shorted at the factory by a solder bridge at the FPC for
protection during transportation and storage of the unit. If this is the case, open the short circuit
(accessible from the bottom side of the module) quickly with grounded soldering iron (less than
300
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo