Service Manuals, User Guides, Schematic Diagrams or docs for : ONKYO Audio TX-NR525 hfe_onkyo_tx-nr525_service_en
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download hfe_onkyo_tx-nr525_service_en documenatation <<Text preview - extract from the document TX-NR525
Ref. No. 4431
032013
AV RECEIVER
MODEL TX-NR525(B)/(S)
North American and Taiwanese models ---> "MUSIC OPTIMIZER" North American and Taiwanese models ---> "DIMMER"
European, Australian and Asian models ---> "PURE AUDIO" European, Australian and Asian models ---> "RT/PTY/TP"
RC-865M
Black and Silver models
B MDC, B MDF 120V AC, 60Hz
B MMK, B MMQ, B MMR 220-240V AC, 50/60Hz
B MPP, B MPB, B MPA, S MPP 230V AC, 50Hz
TX-NR525
SERVICE PROCEDURE-1
1. Replacing the fuses
This symbol located near the fuse indicates that the
fuse used is slow operating type, For continued protection against
fire hazard, replace with same type fuse, For fuse rating, refer to : 120V,Canadian model
the marking adjacent to the symbol. : 230V,CE(European) country model
: 230V,UK model
Ce symbole indique que le fusible utilise est e lent. : 220/230-240V, Korean model
Pour une protection permanente, n'utiliser que des fusibles de meme : 220/230-240V,Hong kong model
: 230V,Australian model
type. Ce demier est indique la qu le present symbol est apposre.
: 220/230-240V,Chinese model
: 120V,Taiwanese model
REF NO. PART NAME DESCRIPTION PART NO. REMARKS
F6401 FUSE 10A-UL/T-233 252330GR !
F6401 or FUSE 10A-T/UL-ST2 252333GR !
F6402 FUSE 10A-UL/T-233 252330GR !
F6402 or FUSE 10A-T/UL-ST2 252333GR !
F9002 FUSE 4A-SE-EAK 252077GR !
F9002 FUSE 8A-UL/T-233 252329GR !
F9001 FUSE 1A-SEUL-TL250V 252397T !
F201 FUSE 4A-SEUL-TL250V 252392T !
2. Safety check out
(U.S.A. model only)
After correcting the original service problem, perform the following safety check before releasing the unit to the customer.
Leakage current Check
Measure the leakage current to a known earth ground (water pipe or conduct etc.) by connecting a leakage current
tester between the earth ground and exposed metal parts of the unit (input/output ground terminals,
screw heads or metal overlays etc.).
Plug the power supply cord directly into a 120Vac 60Hz wall socket and turn ON/STANDBY button on.
Any current measured must not exceed 0.5mA.
3. To initialize the unit
Press ON/STANDBY button while pressing down VCR/DVR(TX-NR525/HT-RC550 is CBL/SAT) button
when the unit is POWER ON, then the FL displays "CLEAR", and turn to STAND-BY. Remove power cord from power line.
4. To check version of each Firmware
a. Push STANDBY/ON key while pushing down DISPLAY key to display MMPU(Main Microprocessor) version.
e.g.
M1.01/13204ALN Version of MMPU displayed only for 3 seconds.
b. In display version, -(TONE) key and +(TONE) key are pushed to display another F/W version.
-(TONE) +(TONE)
e.g.
M1.01/13204ALN MMPU
-(TONE) +(TONE)
e.g. Version displayed
D1.02/13202AEA DSP
only for 3 seconds.
-(TONE) +(TONE)
e.g.
O1.00/12Z18AL HDMI/Video
Microprocessor
TX-NR525
SERVICE PROCEDURE-2
5. Notes on repairs (Power supply board)
Some parts on BAPS-1333 may remain high voltages even after the power cord is disconnected from AC power source.
Before starting repair and any other work , please discharge C9002 by connecting resistors between its terminals.
See the figure below(recommended resistor spec: 5 k ohms/ 10W)
It is dangerous to touch the "HIGH VOLTAGE PRIMARY" area surrounded by white lines without discharging.
U0063
POWER SUPPLY(PRI) PC BOARD ASS'Y
BAPS-1333
HIGH VOLTAGE PRIMARY
Top
Resistor
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-1
AUDIO DEBUG MODE-1/5
The operations of DSP and DIR etc are able to checked by the information displayed on FL in this debug mode.
This information will help to analysing digital audio no sound trouble.
To set in Debug mode
1. Press twice the ON/ STANDBY key while pressing the DISPLAY key.
e.g. The version number of Microprocessor is displayed
M1.01/13204A L N only for 3 seconds.
2. Press + (TONE) button while the version number of microprocessor is displayed.
e.g. The version number of DSP is displayed
D1.02/13202A E A only for 3 seconds.
3. Press DISPLAY button while the version number of DSP is displayed.
e.g.
0A0002: __:00 _ _ Step-1
4. Proceed to the next step by pressing the DISPLAY key.
ANA:o:NON:C : _ _ Step-2
1:ANA _048k04 8 k Step-3
AUDIO dubug mode
2/0.0:_2.0:3/ 4 Step-4 The status of DSP and DIR etc
will be displayed.
2:o:PCM _:PC M_ _ Step-5
_00:x:F:OFF_ _ _ Step-6
SP00F _00F00 4 0 9 Step-7
_48_48256STB _ _ Step-8
L :0000 000 0
SW :0000 0000
Exit
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-2
AUDIO DEBUG MODE-2/5
FL Display
Step-1
1 1 2 2 3 3 : 4 4 : 5 5
1. st_srd.lmd 3. st_srd.extdecmd
01 C_LM_LAST F4 C_LM_ASC 00 C_EXTDECMD_OFF
02 C_LM_PURE F5 C_LM_FLASH 01 C_EXTDECMD_10
03 C_LM_DIRECT F6 C_LM_DEBUGMODE 02 C_EXTDECMD_20
04 C_LM_STEREO F7 C_LM_FLASH2 03 C_EXTDECMD_MOVIE
05 C_LM_MONO F8 C_LM_FLASH3 04 C_EXTDECMD_MUSIC
20 C_LM_SURR F9 C_LM_FLASH4 05 C_EXTDECMD_GAME
50 C_LM_THX_MUSIC FA C_LM_FLASH_CHECK 06 C_EXTDECMD_HEIGHT
70 C_LM_THX_GAME 0D C_LM_RPG 07 C_EXTDECMD_WIDE
90 C_LM_THX_CINEMA 0E C_LM_ACTION
A0 C_LM_THX_U2GAME 0F C_LM_ROCKBAND
4. Muting port
A8 C_LM_THX_U2MUSIC 10 C_LM_SPORTS
B0 C_LM_THX_U2CINEMA
D DIGMUTE port
D0 C_LM_AUDYSSEY 2. st_srd.extdec A AMUTE port
48 C_LM_DTSSS 00 C_EXTDEC_OFF
06 C_LM_ORCHESTRA 01 C_EXTDEC_20_PLII 5. Factor of muting
07 C_LM_UNPLUGGED 02 C_EXTDEC_20_PLIIX
bit_1 SELMUTE
08 C_LM_STUDIOMIX 03 C_EXTDEC_20_PLIIZ
bit_2 POWMUTE
09 C_LM_TVLOGIC 04 C_EXTDEC_20_NEO6
bit_3 PROTECTMUTE
0A C_LM_ALLCHST 05 C_EXTDEC_51_MTR
bit_4 AUDIOOUTMUTE
0B C_LM_FULLMONO 06 C_EXTDEC_51_DSC
bit_5 AUDIOMUTE
0C C_LM_TD 07 C_EXTDEC_51_NEO6
08 C_EXTDEC_51_EX bit_6 DIRMUTE
F1 C_LM_TESTTONE
09 C_EXTDEC_51_PLIIX bit_7 DACMUTE
F2 C_LM_TESTTHR
F3 C_LM_TESTAUTO 0A C_EXTDEC_51_PLIIZ bit_8 HDMIMUTE
0B C_EXTDEC_9624
0C C_EXTDEC_9624_MTR
0E C_EXTDEC_71MULTI
0F C_EXTDEC_20_NEURAL
10 C_EXTDEC_51_NEURAL
Step-2
6 6 6 : 7 : 8 8 8 : 9 : 10
6. Audio input channel 8. HDMI audio lock 10. RX mute
ANA Analog STB SOUND STATE FIX V HDMI MUTE
COX Coaxial TRS SOUND STATE UNFIX
OPT Optical NON SOUND STATE NONE
HDM HDMI
ARC ARC
9. Display inhibit frag
S display_inhibit SET
7. DSP decode
C display_inhibit CLR
o DSP Detect OK
x DSP No Detect
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-3
AUDIO DEBUG MODE-3/5
Step-3
1 : 11 11 11 11 12 12 12 k 13 13 13 k
11. Source_format 12. st_srd.fs 13. st_hd_display.fs
UNLK DDR_UNLOCK DTSC DDR_DTSCD ??? unknown ??? unknown
ANA DDR_ANALOG AAC DDR_AAC 008 8kHz 008 8kHz
PCM DDR_PCM MPCM DDR_MCHPCM 011 11kHz 011 11kHz
AC3 DDR_AC3 MCH DDR_MCH 012 12kHz 012 12kHz
DTS DDR_DTS TRUE DDR_TRUE 016 16kHz 016 16kHz
MPEG DDR_MPEG MSTR DDR_MSTR 022 22kHz 022 22kHz
DATA DDR_DATA DSD DDR_DSD 024 24kHz 024 24kHz
UNKW DDR_UNKNOWN PLUS DDR_DDPLUS 032 32kHz 032 32kHz
NORD DDR_NOT_READY EXPR DDR_DTSEXP 044 44.1kHz 044 44.1kHz
NPCM DDR_NOT_PCM DTSH DDR_DTSHD 048 48kHz 048 48kHz
FS96 DDR_FS96 064 64Hz 064 64Hz
NODT DDR_NOT_DETECT 088 88.2kHz 088 88.2kHz
096 96kHz 096 96kHz
176 176.4kHz 176 176.4kHz
192 192kHz 192 192kHz
Step-4 . : :
14 14 14 15 16 16 16 16 17 17 17
14. Information of the input channels
for listening mode transition
??? C_FMT_UNKNOWN 4H3 C_FMT_43H 31 C_FMT_31
10 C_FMT_10 5H4 C_FMT_54H 22 C_FMT_22
20 C_FMT_20 5H3 C_FMT_53H 32 C_FMT_32
30 C_FMT_30 4W4 C_FMT_44W 23 C_FMT_23
21 C_FMT_21 4W3 C_FMT_43W 33 C_FMT_33
31 C_FMT_31 5W4 C_FMT_54W 24 C_FMT_24
22 C_FMT_22 5W3 C_FMT_53W 34 C_FMT_34
32 C_FMT_32 11 C_FMT_11 4H2 C_FMT_42H
23 C_FMT_23 5H2 C_FMT_52H
15. Information of the LFE channel input 4W2 C_FMT_42W
33 C_FMT_33
24 C_FMT_24 0 SW 0ch 5W2 C_FMT_52W
34 C_FMT_34 1 SW 1ch 4H4 C_FMT_44H
4H2 C_FMT_42H 2 SW 2ch 4H3 C_FMT_43H
5H2 C_FMT_52H 5H4 C_FMT_54H
4W2 C_FMT_42W 16. Channel information for the FL display 5H3 C_FMT_53H
5W2 C_FMT_52W four-digit string "10.2" "5.1" "1 +1" 4W4 C_FMT_44W
4H4 C_FMT_44H 4W3 C_FMT_43W
17. Number of channels 5W4 C_FMT_54W
after decoding 5W3 C_FMT_53W
??? C_FMT_UNKNOWN 11 C_FMT_11
10 C_FMT_10
20 C_FMT_20
30 C_FMT_30
21 C_FMT_21
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-4
AUDIO DEBUG MODE-4/5
Step-5
2 : 18 : 19 19 19 19 : 20 20 20 20
18. Audio output OK/NG 19. Details of input format 20. Details of the format for the FL display
o decode OK ANA C_SRC_ANA
ANA C_SRC_ANA
x decode NG PCM C_SRC_PCM
PCM C_SRC_PCM
DLB C_SRC_DD
DLB C_SRC_DD
DEX C_SRC_DD_EX
DEX C_SRC_DD_EX
DTS C_SRC_DTS
DTS C_SRC_DTS
MTR C_SRC_DTS_MTR
MTR C_SRC_DTS_MTR
DSC C_SRC_DTS_DSC
DSC C_SRC_DTS_DSC
D96 C_SRC_DTS_96
D96 C_SRC_DTS_96
96M C_SRC_DTS_96M
96M C_SRC_DTS_96M
AAC C_SRC_AAC
AAC C_SRC_AAC
MCH C_SRC_MCH
MCH C_SRC_MCH
DSP C_SRC_DSP
DSP C_SRC_DSP
MPCM C_SRC_MCHPCM
MPCM C_SRC_MCHPCM
DSD C_SRC_DSD
DSD C_SRC_DSD
TRUE C_SRC_TRUE
TRUE C_SRC_TRUE
TREX C_SRC_TRUE_EX
TREX C_SRC_TRUE_EX
MSTR C_SRC_MSTR
MSTR C_SRC_MSTR
PLUS C_SRC_DDPLUS
PLUS C_SRC_DDPLUS
PLEX C_SRC_DDPLUS_EX
PLEX C_SRC_DDPLUS_EX
EXP C_SRC_DTSEXP
EXP C_SRC_DTSEXP
DTSH C_SRC_DTSHD
DTSH C_SRC_DTSHD
DSUR C_SRC_DD_SUR
DSUR C_SRC_DD_SUR
DPSR C_SRC_DDPLUS_SUR
DPSR C_SRC_DDPLUS_SUR
TRSR C_SRC_TRUE_SUR
TRSR C_SRC_TRUE_SUR
Step-6
21 21 : 22 : 23 : 24 24 24 25 25
21. Dialog norm 23. Return value of DIR busy or free
Dialog Norm value from 0 to 31 Request_dir (DDC_BUSY)
F Free
22. Return value of DIRINT Request_dir
B Busy
(DDC_STATUS)
o LOCK 24. emphasis of information
x UNLOCK ON ON
OFF OFF
25. HDDVD/BLUE(only DDPLUS)
BD Bluray
HD HDDVD
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-5
AUDIO DEBUG MODE-5/5
Step-7
26 26 27 27 28 * 29 * 30 30 31 31 32 32
26. AudioIF DA830 input 31. DIR switch sequence number
IH AUD_IF_I2S_H 0B CLOCK_FREQ_88K 00 SEQ_SWITCH_POWEROFF
DS AUD_IF_DSD 0C CLOCK_FREQ_96K 01 SEQ_SWITCH_RESET
IS AUD_IF_I2S 0D CLOCK_FREQ_128K 02 SEQ_SWITCH_POWERON_WAIT
NT AUD_IF_NET 0E CLOCK_FREQ_176K 03 SEQ_SWITCH_CHANGE
SP AUD_IF_SPDIF 0F CLOCK_FREQ_192K 04 SEQ_SWITCH_FREE
AD AUD_IF_ADC
30. DIR sequence number 32. DAC sequence number
HR AUD_IF_DDDTSHR
00 SEQ_DIG_POWEROFF 00 SEQ_DAC_POWEROFF
27. Information of DIR Burst Preamble 10 SEQ_DIG_RESET 01 SEQ_DAC_RESET
DS DTSHD HR 11 SEQ_DIG_POWERON_WAIT 02 SEQ_DAC_POWERON_WAIT
DP DD PLUS 12 SEQ_DIG_RESTART 03 SEQ_DAC_INITIALIZE
Preamble Val 0x?? 13 SEQ_DIG_WAIT_HDMI_FREE 04 SEQ_DAC_RESTART
20 SEQ_DIG_INPSEL_SET 05 SEQ_DAC_CMND_SET
28. DIR Free or Busy
30 SEQ_DIG_ANALOG_SET 06 SEQ_DAC_FREE_WAIT
F Free
31 SEQ_DIG_DIGITAL_SET
B Busy 07 SEQ_DAC_FREE
32 SEQ_DIG_MCHPCM_SET
29. DIR Detect Fs 33 SEQ_DIG_MCHANA_SET
00 CLOCK_FREQ_UNKNOWN 34 SEQ_DIG_DDPDTSHD_SET
01 CLOCK_FREQ_8K 35 SEQ_DIG_NET_SET
02 CLOCK_FREQ_11K 40 SEQ_DIG_INIT_ERROR
41 SEQ_DIG_CHK_ERROR1
03 CLOCK_FREQ_12K
42 SEQ_DIG_CHK_ERROR2
04 CLOCK_FREQ_16K
43 SEQ_DIG_CHK_FREE
05 CLOCK_FREQ_22K
50 SEQ_DIG_CHK_ANALOG
06 CLOCK_FREQ_24K
60 SEQ_DIG_LOCK_PLL
07 CLOCK_FREQ_32K
61 SEQ_DIG_LOCK_ANA
08 CLOCK_FREQ_44K
f0 SEQ_DIG_FREE
09 CLOCK_FREQ_48K
f1 SEQ_DIG_FREE_ANA
0A CLOCK_FREQ_64K
Step-8
33 33 33 34 34 34 35 35 35 36 36 36
33. Information of the 34. Information of the 35. Information of the input MCLK of DA830
input FS of DA830 output FS of DA830
64 AUD_MCLK_64Fs
UNK C_FS_UNKNOWN UNK C_FS_UNKNOWN
128 AUD_MCLK_128Fs
8 C_FS_08 8 C_FS_08
256 AUD_MCLK_256Fs
11 C_FS_11 11 C_FS_11
384 AUD_MCLK_384Fs
12 C_FS_12 12 C_FS_12
512 AUD_MCLK_512Fs
16 C_FS_16 16 C_FS_16
640 AUD_MCLK_640Fs
22 C_FS_22 22 C_FS_22
768 AUD_MCLK_768Fs
24 C_FS_24 24 C_FS_24
32 C_FS_32 32 C_FS_32 36. State of the audio input of DA830
44 C_FS_44 44 C_FS_44
NO AUD_STS_SOUND_NO
48 C_FS_48 48 C_FS_48
TRS AUD_STS_SOUND_TRANS
64 C_FS_64 64 C_FS_64
STB AUD_STS_SOUND_STAB
88 C_FS_88 88 C_FS_88
96 C_FS_96 96 C_FS_96
176 C_FS_176 176 C_FS_176
192 C_FS_192 192 C_FS_192
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-6
HDMI DEBUG MODE-1/4
HDMI-related operations can be checked to some extent by displaying HDMI debug mode.
To enter this mode
Hold down DISPLAY button for 3 seconds. Information display will last for about 8 seconds.
Resolution display method
Input resolution
1 0 8 0 i / 6 0
Output resolution
1 0 8 0 i / 6 0
List of standard resolution
4 8 0 i / 6 0 # 5 7 6 i / 5 0 5 7 6 p 2 0 0
4 8 0 p / 6 0 # 5 7 6 p / 5 0 5 7 6 i 2 0 0
1 0 8 0 i / 6 0 # 2 8 8 p / 5 0 4 8 0 p / 6 0
7 2 0 p / 6 0 1 0 8 0 p / 2 4 4 8 0 p 2 4 0
1 0 8 0 p / 6 0 1 0 8 0 p / 2 5 4 8 0 i 2 4 0
2 4 0 p / 6 0 1 0 8 0 p / 3 0 * 4 8 0 p / 6 0
# 4 8 0 i / 6 0 V G A * 5 7 6 p / 5 0
# 4 8 0 p / 6 0 1 0 8 0 i 1 0 0 7 2 0 p / 2 4
# 2 4 0 p / 6 0 7 2 0 p 1 0 0 7 2 0 p / 2 5
5 7 6 i / 5 0 5 7 6 p 1 0 0 7 2 0 p / 3 0
5 7 6 p / 5 0 5 7 6 i 1 0 0
1 0 8 0 i / 5 0 1 0 8 0 i 1 2 0
7 2 0 p / 5 0 7 2 0 p 1 2 0
1 0 8 0 p / 5 0 4 8 0 p 1 2 0
2 8 8 p / 5 0 4 8 0 i 1 2 0
Display of Input Resolution
DVI input signal
4 8 0 I / 6 0
4 8 0 P / 6 0
"I" and "P" will be capitalized.
VGA input signal
* V G A
Display the " " in column 1
No input
U n k n o w n
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-7
HDMI DEBUG MODE-2/4
Dislay of Output Resolution
For a video processor Via VSP
Display the " " 1 0 8 0 i / 6 0
in column 4
VSP skip
1 0 8 0 i / 6 0
DVI input signal i / p will be
capitalized. 4 8 0 I / 6 0
4 8 0 P / 6 0
VGA input signal Display the " "
in column 5 * 4 8 0 p / 6 0
Display the " "
RSEN is OFF in column 14 4 8 0 p / 6 0 *
EDID_READ is NG Display the " # "
in column 14 4 8 0 p / 6 0 #
Resolution Error Display the " x "
4 8 0 p / 6 0 x
in column 14
No output
(Signal output destination - - - - -
can not be found.)
Hot-plug of Sink equipment
can not be detected. O F F
4K Upscaling
Display of Input resolution
1 0 8 0 i / 6 0
Display of Output resolution * * * * x * * * * p / * *
If the three-digit numbers
* * * are refrate
List of resolution
3 8 4 0 x 2 1 6 0 p / 3 0
3 8 4 0 x 2 1 6 0 p / 2 5
3 8 4 0 x 2 1 6 0 p / 2 4
4 0 9 6 x 2 1 6 0 p / 2 4
Resolution Error 3 8 4 0 x 2 1 6 0 p / 3 0 x
EDID_READ_NG 3 8 4 0 x 2 1 6 0 p / 3 0 #
3D Display
Resolution display
1 0 8 0 p / 2 4 ( 3 D )
Status Display H D M I 4 4 4 3 6 b i t
3D format F r a m e P a c k i n g
INPUT/OUTPUT I N : O U T :
RSEN OFF Display the " "
in column 14 1 0 8 0 p / 2 4 ( 3 D ) *
EDID READ NG Display the " # "
in column 9 H D M I 4 4 4 # 3 6 b i t
Resolution Error Display the " x "
in column 13 1 0 8 0 p / 2 4 ( 3 D ) x
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-8
HDMI DEBUG MODE-3/4
Status
Input Mode HDMI input
H D M I 4 4 4 3 6 b i t
DVI input
D V I 4 4 4 3 6 b i t
No input - - - 4 4 4 3 6 b i t
RGB
Input Color H D M I R G B 3 6 b i t
422
H D M I 4 2 2 3 6 b i t
444
H D M I 4 4 4 3 6 b i t
24bit
H D M I R G B 2 6 b i t
30bit
H D M I R G B 3 0 b i t
Deep Color
36bit
H D M I R G B 3 6 b i t
3D format
Frame Packing
F r a m e P a c k i n g
Field alternative
F a l t e r n a t i v e
Line alternative
L a l t e r n a t i v e
Side-by-Side(Full)
S i d e b y S i d e ( F )
L+depth
L + d e p t h
L+depth + graphics
L + d e p t h g r a p h i c
Side by Side(Harf)
S i d e b y S i d e ( H )
Top and Bottom
T o p - a n d - B o t t o m
unknown
U N K N O W N
INPUT/ OUTPUT
I N : * * O U T : * *
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-9
HDMI DEBUG MODE-4/4
PC Resolution
Input Resolution 1 0 2 4 x 7 6 8 p / 6 0
Output Resolution 1 0 2 4 x 7 6 8 p / 6 0
Display of Input resolution * * * * x * * * * p / * *
Horizontal resolution Vertical resolution Referat
DVI input Display uppercase P/I
1 0 2 4 x 7 6 8 P / 6 0
HDMI input Display lowercase p/i 1 0 2 4 x 7 6 8 p / 6 0
Three-digit numbers
are Referat 1 0 2 4 x 7 6 8 P 1 2 0
No input
U N K N O W N
Display of Output resolution
* * * * x * * * * p / * *
Horizontal resolution Vertical resolution Referat
DVI output
Display uppercase P/I 1 0 2 4 x 7 6 8 P / 6 0
HDMI output Display lowercase p/i
1 0 2 4 x 7 6 8 p / 6 0
Display"-----" - - - - -
Three-digit numbers
are Referat 1 0 2 4 x 7 6 8 P 1 2 0
EDID READ NG Display the " # " in
column 13 1 0 2 4 x 7 6 8 P / 6 0 #
Resolution through Display the " x " in
column 13 1 0 2 4 x 7 6 8 P / 6 0 x
INPUT/ OUTPUT
I N : * O U T : *
TX-NR525/ 626/ 727/ HT-RC550/ 560/ DTR-30.5/ 40.5
DEBUG MODE-10
SERVICE INFORMATION MODE
Displaying Service information
This service information display system is helpful in analyze the status when the unit goes into Protect mode and is powered off.
Pay attention that the status will change if a button is pushed.
1. Press twice the ON/ STANDBY key while pressing the DISPLAY key.
e.g. The version of main microprocessor is
M1.01/13204A L N
displayed only for 3 seconds.
2. Press HOME button within 3 seconds above.
e.g.
- 80 F 27 DD Information Displayed
Power off Cause Temperature Volume Level Listenning Mode
T : Thermal Protect : xx F or xx C ---> Refer to the code list below.
V : Voltage Protect
I : Current Protect
- : Other
Listening Mode Code List
01 C_LM_LAST D0 C_LM_AUDYSSEY F4 C_LM_ASC
02 C_LM_PURE 48 C_LM_DTSSS F5 C_LM_FLASH
03 C_LM_DIRECT 06 C_LM_ORCHESTRA F6 C_LM_DEBUGMODE
04 C_LM_STEREO 07 C_LM_UNPLUGGED F7 C_LM_FLASH2
05 C_LM_MONO 08 C_LM_STUDIOMIX F8 C_LM_FLASH3
20 C_LM_SURR 09 C_LM_TVLOGIC F9 C_LM_FLASH4
50 C_LM_THX_MUSIC 0A C_LM_ALLCHST FA C_LM_FLASH_CHECK
70 C_LM_THX_GAME 0B C_LM_FULLMONO 0D C_LM_RPG
90 C_LM_THX_CINEMA 0C C_LM_TD 0E C_LM_ACTION
A0 C_LM_THX_U2GAME F1 C_LM_TESTTONE 0F C_LM_ROCKBAND
A8 C_LM_THX_U2MUSIC F2 C_LM_TESTTHR 10 C_LM_SPORTS
B0 C_LM_THX_U2CINEMA F3 C_LM_TESTAUTO
3. Press HOME button again. The following information are displayed.
e.g.
01:23 10 h
Time after Power on Time after Initialize
xx : xx xx hour
4. Press RETURN button. The information will be cleared.
e.g.
ProtectData C L R
TX-NR525/HT-R592/HT-RC550
OPERATION CHECK-1
1.OPERATION CHECK(1/2)
1-1. OPERATIONS OF VOLTAGE-DETECTION PROTECTORS.
See "OPERATION CHECK-3,-5" for TEST MODE operation.
NOTE: Don't connect load nor short speaker terminals.
a. Change the state to "TEST-4-21".
b. It tests by being automatic in order of TEST 4-21(FL+) 22(FR-) 23(C+) 24(SL-) 25(SR+) ( 26(SBL-)
27(SBR+) ). If TEST 4-27(TX-NR525/HT-RC550 are 4-25) is OK, it becomes the display of "TEST-4-35".
c. It will complete, if displayed on FL TUBE as "TEST 4-35".
1-2. OPERATIONS OF CURRENT-DETECTION PROTECTORS
See "OPERATION CHECK-3,-5" for TEST MODE operation.
a. Change the state to "TEST-4-35".
Even if you connect 3-ohm load for every channel of L, R, C, SL, SR, SBL and SBRch, a relay should not cut off.
If 1-ohm load is connected for every channel of L, R, C, SL, SR,SBL and SBRch, a relay should hold the state of ON.
1-3. CONFIRMATION OF RDS (RADIO DATA SYSTEM) OPERATION (Applied to MM*/MP* type )
a. Input 98MHz,30dB signal modurated with RDS data.
b. When a PS information is received, the name of the station "RDS TEST" shall be displayed within 2 seconds instead
of the frequency.
1-4. CONFIRMATION OF HEAD PHONE OPERATION.
Confirm the Listening Mode is automatically switched to "STEREO" mode when headphones plug is inserted into
the PHONES jack.
1-5. COMFIRMATION OF FRONT USB
See "OPERATION CHECK-3,-4" for TEST MODE operation.
a. Connect ipod to AVR USB port.
b. When set to TEST 3-09, confirm that the display of AVR change "connecting" to "Push [MODE] b ..." or "Playlist" after
few seconds.
The following iPod models can be used for inspection.(The above-mentioned operation is not done excluding the
following items.)
iPod classic, 3G nano, 4G nano, 5G nano
1-6. COMFIRMATION OF REAR USB(Applied to TX-NR525/HT-RC550)
See "OPERATION CHECK-3,-4" for TEST MODE operation.
a. Connect USB-Storage to AVR USB port.
b. When set to TEST 3-10, confirm that the display of AVR change device name.
1-7. COMFIRMATION OF NETWORK(Only TX-NR525/HT-RC550)
See "OPERATION CHECK-3,-4" for TEST MODE operation.
a. Connect the receiver to the router.
b. When set to TEST3-18 confirm that the display of AVR change IP adress.
*Please wait for about 1 minute after turning on the power supply of the set when you use TEST 3-18.
1-8. CONFIRMATION OF OUTPUT SENSER AND THERMAL SENSOR
See "OPERATION CHECK-3,-5" for TEST MODE operation.
a. Set the TEST MODE to "TEST 4-36" and "TEST 4-37".
After light "FM STEREO" on FL display ,
the relays RL641/642 is OFF and "FM STEREO"is off .(TEST 4-37 is only for HT-R592)
b. Push ON/Standby button 2 times while pushing down DISPLAY button to display CPU Debug PROGRAM version.
Push TONE button while displaying CPU PROGRAM version to display value of temparature sensor.
Confirm outside temperature
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo