Service Manuals, User Guides, Schematic Diagrams or docs for : ONKYO Audio TX-SR602 onkyo_tx-sr602-e_8260_sm

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download onkyo_tx-sr602-e_8260_sm documenatation <<

Text preview - extract from the document

                                                                  TX-SR602/E

                                                             Ref. No. 3825
                                                                   092004
                  SERVICE MANUAL


              AV RECEIVER
      MODEL TX-SR602/E/8260




                                                  TX-SR602




        Black, Golden and Silver models

BMDD,BMDC,SMDC                  120V AC, 60Hz
BMPP,SMPP,BMPA,SMPA,GMPT        230-240V AC, 50Hz
BMWT,GMWT                       120/220-230V AC, 50/60Hz
GMGK,GMGQ,GMGR                  220-230V AC, 50Hz             RC-590M or
                                                              RC-591M




       SAFETY-RELATED COMPONENT
       WARNING!!
       THE MARK     FOUND ON SOME COMPONENT
       PARTS INDICATES THE CRITICAL FOR RISK OF
       FIRE AND ELECTRIC SHOCK.
       WHEN REPLACING, BE SURE TO USE PARTS OF
       IDENTICAL DESIGNATION.
       MAKE LEAKAGE-CURRENT OR RESISTANCE
       MEASUREMENTS TO DETERMINE THAT EXPOSED
       PARTS ARE ACCEPTABLY INSULATED FROM THE
       SUPPLY CIRCUIT BEFORE RETURNING THE
       APPLIANCE TO THE CUSTOMER.
Basic check out on receive you work on before submit PCB Auth Request.
Please give us Voltage info on each DSP ICs and where you lost audio signal ?

                                                                             CONFIDENTIAL

                                                                                                Technical Tip
     18 Park Way, Upper Saddle River, NJ 07458
                                                  Date: May 25, 2006
         _____________________________________________________________

         Model: HTR-330/530, TX-SR303/SR503                                        HTR520,TXSR502..

         Subject: General troubleshooting for Protect problem.




    Use scope to check at power on before unit go protection -->




    Replace all driver transistors at the def.channel at the same time -->




         ______________________________________________________________________________________
                                      CONFIDENTIALITY NOTICE:
         This document and the information it contains is intended for the exclusive use of Authorized ONKYO Service Centers and their
         employees. This document may contain information that is privileged, confidential and exempt from disclosure under applicable law
         and terms of the ONKYO Service Agreement. Any dissemination, distribution or copying of this document and the information it
         contains is strictly prohibited.
HTR520,TXSR502..
  Dsp board no audio signal output
1 . Normal audio using analog inputs. Do you have all Dolby surround sound ?

2 . All DSP voltages are normal ? Did all supply voltage go to all ICs ?+5vDSP, 2.5V,+3.3V...
+7v,-7V..
3 .Input sel IC. Use CD analog input audio signal (ADRT+,ADRT- and ADLT+,ADLT-) out to DAC IC ?
    Surround analog signal out (DAC L,DAC R,DAC C,DAC SW,DAC LS, DAC RS ,DAC SB* back to Input sel.IC.
    Pin 1 to pin8 out to p5504. ( Same as pre out) check Mutting transistors Q5600
    to Q5617 .
4 . When use digital input signal did digital light up on display ?
    If missing 3.3v,2.5v 5vdsp (on Reg IC Q5640) to DSP ICs will disable DSP function. (U05 Amplifer PC board)

  Please use TX-SR502 as sample Technical Tip Troubleshooting.


When you need Tech help Please use Tech Email and give us Voltage and signal info. What voltage on DSP ICs
and whereyou lost audio signal ? What you have on input IC Data line
Check with TX-SR502 Troubleshooting tips for the Microprocessor and Audio Select IC


Pop noise in speakers Check next page info you have DC in audio line at any channel .
                                                 Date: 04/13/03
ONKYO US A CORPOR ATION
200 W illiams Drive 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo