Service Manuals, User Guides, Schematic Diagrams or docs for : ALPINE ALPINE INA-N333RR

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download ALPINE INA-N333RR documenatation <<

Text preview - extract from the document
  GPS Car Navigation / CD Receiver

                         - Confidential -
"Schematic Diagram (ECU P.W.Board / ASSY,FPC SHEET SW) cannot use a reference function"

                                                             TO ALPINE Home Page

                                                                                   10 /03-A


 The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
 The symbols and their meanings follow.

                       If you ignore this symbol and handle the product incorrectly or unsafely,
        Warning        serious injury or death may result.

                       If you ignore this symbol and handle the product incorrectly or unsafely,
        Caution        injury or only material damage may result.

*The following symbols indicate two levels of cautions.

        When you see this symbol, you have to be very careful.

        When you see this symbol, you have to follow the instructions there.

        Do not look squarely into the laser light                      Fuse Caution
        coming from the pickup.                                        Always use a designated fuse.
        You may loose you sight.                                       Use of an incorrect fuse may result in a fire.

        Do not allow wiring to be caught in the                        Battery Caution
        screw/chassis.                                                 Use the designated battery.
        If wiring is caught in the screw/chassis, it may               Confirm the correct polarity and seat of the battery.
        cause a short circuit, resulting in a fire.                    An incorrect battery or an improperly connected or
                                                                       seated battery may result in a fire.

        High Temperature Caution                                       Designated Parts Caution
        Touching the heat sink may cause severe burns.                 Look up the part list and ensure that only
                                                                       designated parts are used to prevent problems or

        Reverse Power Supply Connections or                            Wiring Caution
        Misconnections Caution                                         Ensure that the wiring is correct when rewiring to
        Reverse power supply connections or                            prevent problems with ignition/breakdown.
        misconnections may cause ignition problems and
        smoke may result.

        Soldering Caution                                              Wear Gloves
        Hot solder from solder splash may cause severe                 Wear gloves to prevent electrical shocks or injury
        burns.                                                         from the end face of the metal.

        For the FDA laser standard, the following CAUTION label is stuck on each product.
        Please be careful for repair.
                                        CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM



     Packing Assembly Parts List                                                                4

     Packing Method View                                                                        4

     System Connection                                                                        5 to 7

     Specifications                                                                            8,9

     I/O Interface                                                                           10 to 16

     Extension Cable                                                                            17

     Adjustment Procedures                                                                    18 , 19

     Block Diagram                                                                            20, 21

     Parts Layout on P.W.Boards and Wiring Diagram                                           22 to 26

     Schematic Diagram                                                                       27 to 40

     Terminal Voltage of IC/ TR                                                              41 to 48

     Description of IC Terminal                                                              49 to 55

     Exploded View (Cabinet)                                                                  56 , 57

     Exploded View (DVD Deck Mechanism) (DV33M010)                                              58

NOTE : Due to continuing product improvement, specifications and designs are subject to
       change without notice.

Packing Assembly Parts List
 Symbol           Part No.                Description                Symbol   Part No.                                Description
      No.                                                             No.

101-1       03S60820Y16      SCR,MCH 5X8 ZN A
101-2       03S60824Y01      SCR,WAV 1.7X4 ZN A
101-3       36A11113W01      CAP,RUBBER(A)
101-4       03A60836Y01      SCR,CUS 5X7 ZN A
102         01T15359Y14      ASSY,ISO CONN N033RS

103         01T85385W04      GPS ANT,GPA-CG2C1
104         15D50063Y01      CARRYING,CASE
105         15D50406W02      CASE,INNER
106         68P50520Y74      O/M AOEU

Packing Method V iew
                                                                                                                                101 -2
                                                                                                            101 -1

                                                                                                                        X4               X1

                                                                                                                           101 -3


                                                                                                                           101 -4

  106                                                              105







                                       X1               X3                                       X1
                                                                                                                               TO CONTENTS
System Connection

                                           ISO Antenna Converter Plug                             Antenna
                                                                                                                ISO Antenna Plug
                                                     1                              2
           (Yellow/Blue) PARKING BRAKE
                                                                                                      To the parking brake signal line
           (Pink/Black)        AUDIO INTERRUPT IN
                                                                                                      To vehicle phone
           (Blue/White)        REMOTE TURN-ON
                                                                                                      To amplifier or equalizer
           (Orange) DIMMER                                                                            To the instrument cluster
                                                                                                      illumination lead
                                           6                                                          To power antenna
           (Red)         IGNITION

           (Black)       GND               7
                                                                                                      Ignition Key
           (Blue)        POWER ANT         8

           choke            10
            coil                       9
                         BATTERY (Yellow)

                                                         12                                       To the vehicle speed pulse line
                                    SPEED SENSOR
                                                               speed sensor                                                      CD Changer
                                                               auxiliary lead                                                      (Ai-NET)
                                                                                          To remote control                     (Sold Separately)
                                                                                          interface Box
                                                                                          To RDS-TMC Box (TMC-001P)
                                                                          15   14

                                                                                19                            Amplifier              Front
                                                                                             22                                                     23

                                                                                20                            Amplifier              Rear

                           17                                                                22

        Ai-NET                                                                  -
                                                                                21                            Amplifier              Subwoofer
   NORM     EQ/DIV                                                                           22

                                                               (Green)          25
                                                                                                       Rear Left
                                                          (Green/Black)         26
                                                               (White)          27
                                                                                                       Front Left
                                                          (White/Black)         28
                                                          (Gray/Black)          29
                                                                                                       Front Right
                                                               (Gray)           30
                                                          (Violet/Black)        31
                                                                                                       Rear Right
                                                               (Violet)         32

                                                                                                                                                 TO CONTENTS
1     Antenna Receptacle                                                        13   Remote Control Interface Connector
      Connect to the supplied ISO antenna converter plug.                            To remote control interface box.
2     Parking Brake Lead (Yellow/Blue)                                          14   To RDS-TMC Receiver (Optional)
      Connect this lead to the power supply side of the parking
      brake switch to transmit the parking brake status signals to                   To connect an Alpine RDS-TMC Receiver, consult your Alpine
      the INA-N333RR.                                                                dealer.
3     Audio Interrupt In Lead (Pink/Black)
      Connect this lead to the Audio Interface output of a cellular             15   GPS Antenna (Included)
      phone which provides ground shorting when a call is                       16   Power Supply Connector
      received.                                                                      Ai-NET Connector
4     Remote Turn-On Lead (Blue/White)                                               Connect this to the output or input connector of other
      Connect this lead to the remote turn-on lead of your                           product (CD changer, Equalizer, etc .) equipped with
      amplifier or signal processor.                                                 Ai- NET.
5     Dimmer Lead (Orange)                                                      18   System Switch
      This lead may be connected to the vehicle's instrument                         When connecting a processor using Ai-NET, place this
      cluster illumination lead. This will enable the vehicle's                      switch in the EQ/DIV position. When no device is
      dimmer control to dim the backlighting of the unit.                            connected, leave the switch in the NORM position.
6     Switched Power Lead (Ignition) (Red)
      Connect this lead to an open terminal on the vehicle's fuse                    NOTE
                                                                                     Be sure to turn the power of f to the unit before changing the
      box or another unused power source which provides (+) 12V
                                                                                     switch position.
      only when the ignition is turned on or in the accessory
7     Ground Lead (Black)                                                       19   Front Output RCA Connectors
      Connect this lead to a good chassis ground on the vehicle.                     RED is right and WHITE is left.
      Make sure the connection is made to bare metal and is                     20   Rear Output RCA Connectors
      securely fastened using the sheet metal screw provided.                        RED is right and WHITE is left.
8     Power Antenna Lead (Blue)                                                 21   Subwoofer Output RCA Connectors
      Connect this lead to the +B terminal of your power antenna,                    RED is right and WHITE is left.
      if applicable.                                                            22   RCA Extension Cable (Sold Separately)
      NOTE                                                                      23   Ai-NET Cable (Included with CD Changer)
      This lead should be used only for controlling the vehicle's power         24   ISO Connector (Speaker Output)
      antenna. Do not use this lead to turn on an amplifier or a signal
      processor, etc.
                                                                                25   Left Rear (+) Speaker Output Lead (Green)
                                                                                26   Left Rear (

◦ Jabse Service Manual Search 2022 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo