Service Manuals, User Guides, Schematic Diagrams or docs for : AMD gx1_pc133_layout

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download gx1_pc133_layout documenatation <<

Text preview - extract from the document

AMD GeodeTM GX1 Processor
PC133 Layout Recommendations


1.0       Scope                                                2.0       Introduction
This document provides the layout designer recommended         The intended audience for this document is a design engi-
layout methodologies and guidelines when implementing          neer using the Geode GX1 processor in a targeted design.
PC133 topology with the AMD GeodeTM GX1 processor.             The recommendations contained in the following sections
This PC133 guideline only applies to the GX1 processor         are intended to assist the design engineer in supervising a
(i.e., not GXm or GXLV processors). For topics not specifi-    successful layout, as well as to provide default constraints
cally covered in this document, standard high-speed digital    that may be entered into the design's database. Some key
design methodologies should be used in order to maintain       sections may prove useful as a reference for the layout
as much design margin as possible and to ensure a quality      designer during layout.
PCB (printed circuit board).
                                                               Certain assumptions are made throughout this document.
This document specifically references or assumes knowl-        For example, the target stackup is a four-layer PCB with
edge of the following sources:                                 two signal layers and two plane layers (2S2P). Also, com-
                                                               ponents are not necessarily constrained to be placed on

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo