Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent 01650-40913 1650B 51B Programming Ref Aug89
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 01650-40913 1650B 51B Programming Ref Aug89 documenatation <<
Text preview - extract from the document
Programming Reference
HP 1650B/HP 1651 B Logic Analyzers
HEWLETT
Em PACKARD
@Copyright Hewlett-Packard Company 1989
Manual Number 0165040913 Printed in the U.S.A. August 1989
Product This Hewlett-Packard product has a warranty against defects in material
Warranty and workmanship for a period of one year from date of shipment. During
warranty period, Hewlett-Packard Company will, at its option, either
repair or replace products that prove to be defective.
For warranty service or repair, this product must be returned to a service
facility designated by Hewlett-Packard. However, warranty service for
products installed by Hewlett-Packard and certain other products
designated by Hewlett-Packard will be performed at the Buyer's facility at
no charge within the Hewlett-Packard service travel area. Outside
Hewlett-Packard service travel areas, warranty service will be performed
at the Buyer's facility only upon Hewlett-Packard's prior agreement and
the Buyer shall pay Hewlett-Packards round trip travel expenses.
For products returned to Hewlett-Packard for warranty service, the Buyer
shall prepay shipping charges to Hewlett-Packard and Hewlett-Packard
shall pay shipping charges to return the product to the Buyer. However,
the Buyer shall pay all shipping charges, duties, and taxes for products
returned to Hewlett-Packard from another country.
Hewlett-Packard warrants that its software and firmware designated by
Hewlett-Packard for use with an instrument will execute its programming
instructions when properly installed on that instrument. Hewlett-Packard
does not warrant that the operation of the instrument software, or
firmware will be uninterrupted or error free.
Limitation of Warranty The foregoing warranty shall not apply to defects resulting from improper
or inadequate maintenance by the Buyer, Buyer-supplied software or
interfacing, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper site preparation
or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.
HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
Exclusive Remedies THE REMEDIES PROVIDED HEREIN ARE THE BUYER'S SOLE
AND EXCLUSIVE REMEDIES. HEWLETT-PACKARD SHALL
NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL
THEORY.
Assistance Product maintenance agreements and other customer assistance
agreements are available for Hewlett-Packard products.
For any assistance, contact your nearest Hewlett-Packard Sales and
Service Office.
Certification Hewlett-Packard Company certifies that this product met its published
specifications at the time of shipment from the factory. Hewlett-Packard
further certifies that its calibration measurements are traceable to the
United States National Bureau of Standards, to the extent allowed by the
Bureau's calibration facility, and to the calibration facilities of other
International Standards Organization members.
Safety This product has been designed and tested according to International
Safety Requirements. To ensure safe operation and to keep the product
safe, the information, cautions, and warnings in this manual must be
heeded.
Printing History
New editions are complete revisions of the manuai. Update packages,
which are issued between editions, contain additional and replacement
pages to be merged into the manual by the customer. The dates on the
title page change only when a new edition or a new update is published.
No information is incorporated into a reprinting unless it appears as a
prior update; the edition does not change when an update is incorporated.
A software code may be printed before the date; this indicates the version
level of the software product at the time of the manual or update was
issued. Many product updates and fLves do not require manual changes
and, conversely, manual corrections may be done without accompanying
product changes. Therefore, do not expect a one-to-one correspondence
between product updates and manual updates.
Edition 1 August 1989 01650-90913
List of Effective Pages
The List of Effective Pages gives the data of the current edition and of any
pages changed in updates to that edition. Within the manual, any page
changed since the last edition will have the date the changes were made
printed on the bottom of the page. If an update is incorporated when a
new edition of the manual is printed, the change dates are removed from
the bottom of the pages and the new edition date is listed in Printing
History and on the title page.
Pages Effective Date
All August 1989
Contents
Chapter 1 Introduction to Programming an Instrument
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..l- 1
Programming Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-2
Talking to the Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-2
Instruction Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-2
Output Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-3
Device Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Instruction Header . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
White Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Instruction Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-4
Header Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-4
Combining Commands from the Same Subsystem . . . . . . . . . . . . . . l-6
Duplicate Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Query Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-7
Program Header Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Parameter Syntax Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-8
Instruction Terminator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-10
Selecting Multiple Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-10
Programming an Instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-11
InitiaIization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-11
Example Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
Program Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12
Receiving Information from the Instrument . . . . . . . . . . . . . . . . . . l-12
Response Header Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l-13
Response Data Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
String Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l-l.5
Numeric Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Numeric Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Definite-Length Block Response Data . . . . . . . . . . . . . . . . . . . . . .l-17
Multiple Queries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .l-18
Instrument Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
HP 1650B/HP 16518 Contents-l
Programming Reference
Chapter 2 Programming Over HP-IB
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..2- 1
Interface Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-l
Command and Data Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-l
Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2
Communicating Over the HP-IB Bus (HP 9000 Series 200/3OO
Controller) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..2- 3
Local, Remote, and Local Lockout . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2-4
BusCommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..2- 5
Device Clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Group Execute Trigger (GET) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Interface Clear (IFC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5
Chapter 3 Programming Over RS-232C
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3- 1
Interface Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-l
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3- 2
Minimum Three-Wire Interface with Software Protocol . . . . . . . . . . .3-2
Extended Interface with Hardware Handshake . . . . . . . . . . . . . . . . . .3-3
Cable Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Configuring the Instrument Interface . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Interface Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-5
Protocol . . . . . . ..~........................................3- 5
Data Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Communicating Over the RS-232C Bus
(HP 9000 Series 200/3OO Controller) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6
Lockout Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-7
Chapter 4 Programming and Documentation Conventions
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4- 1
Truncation Rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-l
Infinity Representation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Sequential and Overlapped Commands . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Response Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Syntax Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
Notation Conventions and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . .4-2
The Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4
Contents-2 HP 1650B/HP 16518
Programming Reference
CommandTypes..........................................4- 4
Tree Traversal Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Command Set Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8
Subsystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
ProgramExamples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4- 9
Chapter 5 Common Commands
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-l
*as . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3
*ESE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
*ESR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
*IDN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..5- 8
*opt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9
*RST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10
*SRE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..5-11
*sTB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13
*wAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-15
Chapter 6 System Commands
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :. . . . . . . . . . . . . .6-l
ARMBnc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6 -4
DATA................................................6- 5
Section Header Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Section Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Data Preamble Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-8
Acquisition Data Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11
DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-18
ERRor...............................................6-19
HEADer.............................................6- U)
KEY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21
LER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-23
LOCKout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6-2 4
LONGform...........................................6- 25
MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26
MESE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
MESR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-29
PPOWer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6-3 1
PRINt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6-3 2
HP lSSOB/HP 1651B Contents-3
Programming Reference
RMODe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6-3 3
SETup.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..6- .
STARt...............................................6- 36
STOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-37
Chapter 7 MMEMory Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
AUToload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7- 4
CATaIog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7- 5
COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-6
DOWNload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7- 7
INITiaIize . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7- 8
LOAD................................................7- 9
LOAD.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7-10
PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7-11
PURGe.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7-12
REName.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7-13
STORe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-14
UPLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7- 15
Chapter 8 DLlSt Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..8- 1
DLISt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
COLumn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3
LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5
Chapter 9 WLlSt Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-l
WLISt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2
OSTate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..9- 3
XSTate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..9- 4
OTIMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..9- 5
XTIMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..9- 6
Contents-4 HP 1650B/HP 16518
Programming Reference
Chapter 10 MACHine Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..lO- 1
MACHine cN>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lO-3
ARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lO-4
ASSign...............................................lO- 5
AUToscale.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..lO- 6
NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .lO-7
TYPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . lO-8
Chapter 11 SFORmat Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-1
SFORmat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll- 3
CLOCk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-4
CPERiod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-5
LABel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-6
MASTer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-8
REMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-9
SLAVe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-10
THReshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..ll-11
Chapter 12 STRace Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12- 1
STRace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12- 4
BRANch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12- 5
FIND................................................12- 8
PREStore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12-10
RANGe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12-12
RESTart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..l2-14
SEQuence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..l2-16
STORe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
TAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..12-19
TERM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-21
HP 1650B/HP 1651B Conter..::s-5
Programming Reference
Chapter 13 SLlSt Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
SLISt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5
coLumn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U-6
DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . u-9
MMODe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..l3-10
OPATtem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13-11
OSEarch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..l3-13
OSTate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13-14
OTAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
RUNTiI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13-16
TAVerage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-18
TMAXimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-19
TMINiium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-20
VRUNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..13-2 1
XOTag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-22
XPATtern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-23
XSEarch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-25
XSTate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Es-26
XTAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-27
Chapter 14 SWAVeform Subsystem
Introduction.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..14-1
SWAVeform.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-3
Accumulate . . . . . . . . . . . . . . ..-......*.: . . . . . . . . . . . . . . . 14-4
DELay...............................................14- 5
INSert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-6
RANGe..............................................14- 7
REMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-8
Contents-6 HP 1650B/HP 1651B
Programming Reference
Chapter 15 SChart Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1
SCHart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3
ACCumuIate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-4
HAxis ............................................... 15-5
VAxis.. ............................................. 15-6
Chapter 16 COMPare Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1
COMPare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-3
CMASk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-4
COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-5
DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-6
FIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-8
RANGe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-9
RUNTiI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-10
Chapter 17 TFORmat Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-l
TFORmat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-2
LABel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-3
REMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-5
THReshold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-6
Chapter 18 mRace Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1
lTRace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-3
AMODe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-4
DURation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..18- 5
EDGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-6
GLITch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..18- 8
PATTern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-9
HP 1650B/HP 16518 Contents-7
Programming Reference
Chapter 19 TWAVeform Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1
TWAVeform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-5
Accumulate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-6
DELay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-7
INSert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19- 8
MMODe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-9
OCONdition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-10
OPATtern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-11
OSEarch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-13
OTIMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-14
RANGe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19- 15
REMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-16
RUNTil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-17
SPERiod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-19
TAVerage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19- 20
TMAXimum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-21
TMINiium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22
VRUNs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19- 23
XCONdition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-24
XOTime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-2 5
XPATtern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19- 26
XSEarch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-28
XTIMe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..19-2 9
Chapter 20 SYMBol Subsystem
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-l
SYMBol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-3
BASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..~- 4
PATTern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..2O- 5
RANGe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..2O- 6
REMove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...20- 7
WIDTh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..20- 8
Contents-8 HP 1650B/HP 16518
Programming Reference
Appendix A Message Communication and System Functions
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-l
Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Functional Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Protocol Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Protocol Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Protocol Exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Syntax Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Syntax Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Device Listening Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8
Device Talking Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-21
Common Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-27
Appendix B Status Reporting
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-l
Event Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Service Request Enable Register . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Bit Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3
Key Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-4
Serial Poll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
Using Serial Poll (HP-IB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
Parallel Poll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8
Polling HP-IB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-10
Configuring Parallel Poll Responses . . . . . . . . . . . . . . . . . . . . . . . B-10
Conducting a Parallel Poll . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11
Disabling Parallel Poll Responses . . . . . . . . . . . . . . . . . . . . . . . . . B-11
HP-IB Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-12
Appendix C Error Messages
Device Dependent Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-l
Command Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
Execution Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . c-3
Internal Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . c-4
Query Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-5
Index
HP 1650B/HP 16518 Contents-9
Programming Reference
Introduction to 1
Programming an Instrument
Introduction This chapter introduces you to the basics of remote programming. The
programming instructions explained in this book conform to the
IEEE 488.2 Standard Digital Interface for Programmable
Instrumentation. These progr amming instructions provide a means of
remotely controlling the HP 1650B/51B. There are three general
categories of use. You can:
l Set up the instrument and start measurements
l Retrieve setup information and measurement results
l Send measurement data to the instrument
The instructions listed in this manual give you access to the measurements
and front panel features of the HP 165OB/51B. The complexity of your
programs and the tasks they accomplish are limited only by your
imagination. This programming reference is designed to provide a
concise description of each instruction.
Chapter 1 is divided into two sections. The first section (pages 2 - 10)
concentrates on program syntax, and the second section (pages 11 - 17)
discusses programming an instrument. Read either chapter 2
"Progr amming Over HP-IB" or chapter 3 "Programming Over RS-232C"
for information concerning the physical connection between the
HP 1650B/51B and your controller. Chapter 4, "Programming and
Documentation Conventions," gives an overview of all instructions and
also explains the notation conventions used in our syntax definitions and
examples. The remaining chapters (5 through 20) are used to explain
each group of instructions.
HP 1650B/HP 16518 Introduction to Programming an Instrument
Programming Reference l-1
Programming
Syntax
Talking to the In general, computers acting as controllers communicate with the
Instrument instrument by sending and receiving messages over a remote interface,
such as HP-IB or RS232C. Instructions for programming the HP
1650B/51B will normally appear as ASCII character strings embedded
inside the output statements of a "host" language available on your
controller. The host language's input statements are used to read in
responses from the HP 1650B/51B.
For example, HP 9000 Series 200/300 BASIC uses the OUTPUT
statement for sending commands and queries to the HP 1650B/51B. After
a query is sent, the response is usually read in using the ENTER
statement. All programming examples in this manual are presented in
BASIC. The following BASIC statement sends a command which causes
the HP 1650B/51B's machine 1 to be a state analyzer:
OUTPUT XXX;" :MACHINEl:TYPE STATE"
Each part of the above statement is explained in the following pages.
instruction Syntax To program the instrument remotely, you must have an understanding of
the command format and structure expected by the instrument. IEEE
488.2's syntax rules govern how individual elements such as headers,
separators, parameters and terminators may be grouped together to form
complete instructions. Syntax definitions are also given to show how
query responses will be formatted. Fiie l-l shows the main syntactical
parts of a typical program statement.
INSTRVCTIDN
/
OUTPUT XXX:":SYSTEM:MENUDISPLAY.2"
Figure l-l. Program Message Syntax
Introduction to Programming an instrument HP 1650B/HP 16518
l-2 Programming Reference
Output Command The output command is entirely dependant on the language you choose to
use. Throughout this manual HP 9000 Series 200/300 BASIC 4.0 is used in
the programmin g examples. People using another language will need to
find the equivalents of BASIC commands like OUTPUT, ENTER and
CLEAR in order to convert the examples. The instructions for the
HP 1650B/51B are always shown between the double-quotes.
Device Address The location where the device address must be specified is also dependant
on the host language which you are using. In some languages, this could
be specified outside the output command. In BASIC, this is always
specified after the keyword OUTPUT. The examples in this manual use a
generic address of XXX. When writing programs, the number you use
will depend on the cable you use in addition to the actual address. If you
are using an HP-IB, see chapter 2. RS-232C users should refer to
chapter 3.
instructions Instructions (both commands and queries) normally appear as a string
embedded in a statement of your host language, such as BASIC, Pascal or
C. The only time a parameter is not meant to be expressed as a string is
when the instruction's syntax definition specifies c block data > . There
are only five instructions which use block data.
Instructions are composed of two main parts: The header, which specifies
the command or query to be sent; and the parameters, which provide
additional data needed to clarify the meaning of the instruction.
Instruction Header The instruction header is one or more keywords separated by colons (:).
The command tree in figure 4-l (in chapter 4) illustrates how all the
keywords can be joined together to form a complete header.
The example in figure l-l shows a command. Queries are indicated by
adding a question mark (?) to the end of the header. Many instructions
can be used as either commands or queries, depending on whether or not
you have included the question mark. The command and query forms of
an instruction usually have different parameters. Many queries do not use
any parameters.
HP 1650B/HP 16518 introduction to Programming an Instrument
Programming Reference 1-3
When you look up a query in this programming reference, you'll find a
paragraph labeled "Returned Format" under the one labeled "Query
Syntax" The syntax definition by "Returned format" will always show the
instruction header in square brackets, like [:SYSTem:MENLJ]. What this
really means is that the text between the brackets is optional, but it's also a
quick way to see what the header looks like.
White Space White space is used to separate the instruction header from the
instruction parameters. If the instruction does not use any parameters,
you do not need to include any white space. White space is defined as one
or more spaces. ASCII defines a space to be character 32 (in decimal).
Tabs can used only if your controller first converts them to space
characters before sending the string to the instrument.
Instruction Parameters Instruction parameters are used to clarify the meaning of the command or
query. They provide necessary data, such as whether a function should be
on or off, which waveform is to be displayed, or which pattern is to be
looked for. Each instruction's syntax definition shows the parameters, as
well as the values they accept. This chapter's "Parameter Syntax Rules"
section has all of the general rules about acceptable values.
When an instruction has more than one parameter they are separated by
commas (,). You are allowed to include spaces around the commas.
Header Types There are three types of headers: Simple Command; Compound
Command; and Common Command.
Simple Command Header. Simple command headers contain a single
keyword. START and STOP are examples of simple command headers
typically used in this instrument. The syntax is:
) must be included with the
simple command header (for example, :RMODE SINGLE) the syntax is:
-z white space > c data > c terminator >
Compound Command Header. Compound command headers are a
combination of two or more program keywords. The first keyword selects
the subsystem, and the last keyword selects the function within that
Introduction to Programming an instrument HP 1650B/HP 16518
1-4 Programming Reference
subsystem. Sometimes you may need to list more than one subsystem
before being allowed to specify the function. The keywords within the
compound header are separated by colons. For example:
To execute a single function within a subsystem, use the following:
: -z subsystem Z= : -z terminator >
(For example :SYSTEM:LONGFORM ON)
To traverse down a level of a subsystem to execute a subsystem within that
subsystem:
: c subsystem z= : : c function z= c data >
(For example :MMEMORY:LOAD:CONF'IG "FILE- ")
Common Command Header. Common command headers control IEEE
488.2 functions within the instrument (such as clear status, etc.). Their
syntax is:
*-z command header > -z terminator >
No space or separator is allowed between the asterisk and the command
header. *CLS is an example of a common command header.
HP 1650B/HP 16518 Introduction to Programming an Instrument
Programming Reference l-5
Combining To execute more than one function within the same subsystem a
Commands from the semi-colon (;) is used to separate the functions:
Same Subsystem
: c subsystem > : c function > c white space z= c data > ;
c function > c white space > c terminator >
(For example :SYSTEM:LONGFORM 0N;HEADER ON)
Duplicate Keywords Identical function keywords can be used for more than one subsystem.
For example, the function keyword MMODE may be used to specify the
marker mode in the subsystem for state listing or the timing waveforms:
:SLIST:MMODE PATTERN
- sets the marker mode to pattern in the state listing.
:TWAVEFORM:MMODE TIME
- sets the marker mode to time in the timing waveforms.
SLIST and TWAVEFORM are subsystem selectors and determine which
marker mode is being modified.
introduction to Programming an Instrument HP 1650B/HP 16518
1-6 Programming Reference
Query Usage Command headers immediately followed by a question mark (?) are
queries. After receiving a query, the instrument interrogates the
requested function and places the response in its output queue. The
output message remains in the queue until it is read or another command
is issued. When read, the message is transmitted across the bus to the
designated listener (typically a controller). For example, the logic
analyzer query :MACHINEl:TWAVEFbRM:RANGE? places the
current seconds per division full scale range for machine 1 in the output
queue. In BASIC, the input statement
ENTER XXX; Range
passes the value across the bus to the controller and places it in the
variable Range.
Query commands are used to find out how the instrument is currently
configured. They are also used to get results of measurements made by
the instrument. For example, the command
:MACHINE1:`lWAVEFORM:XOTIME? instructs the instrument to
place the X to 0 time in the output queue.
p' The output queue must be read before the next program message is sent.
Note ti F or example, when you send the query :TWAVEFORM:XOTIME? you
must follow that with an input statement. In BASIC, this is usually done
with an ENTER statement.
Sending another command before reading the result of the query will
cause the output buffer to be cleared and the current response to be lost.
This will also generate a "QUERY UNTERMINATED" error in the
error queue.
HP 1650B/HP 1651B Introduction to Programming an Instrument
Programming Reference 1-7
Program Header Program headers can be sent using any combination of uppercase or
Options lowercase ASCII characters. Instrument responses, however, are always
returned in uppercase.
Both program command and query headers may be sent in either
longform (complete spelling), shortform (abbreviated spelling), or any
combination of lcngform and shortform. Either of the following examples
turns the headers and longform on.
OUTPUT XXX;" :SYSTEM:HEAOER 0N;LONGFORM ON" - longform
OUTPUT XXX;":SYST:HEAD 0N;LONG ON" - shortform
Programs written in longform are easily read and are almost
self-documenting. The shortform syntax conserves the amount of
controller memory needed for program storage and reduces the amount
of I/O activity.
,I[' The rules for shortform syntax are shown in chapter 4 "Programming and
Note d D ocumentation Conventions."
Parameter Syntax There are three main types of data which are used in parameters. They
Rules are numeric, string, and keyword. A fourth type, block data, is used only
for five instructions: the DATA and SETup instructions in the SYSTem
subsystem (see chapter 6) and the CATalog, UPLoad, and DOWNload
instructions in the MMEMory subsystem (see chapter 7). These syntax
rules also show how data may be formatted when sent back from the
HP 1650B/51B as a response.
The parameter list always follows the instruction header and is separated
from it by white space. When more than one parameter is used, they are
separated by commas. You are allowed to include one or more spaces
around the commas, but it is not mandatory.
introduction to Programming an Instrument HP 1850B/HP 18518
1-8 Programming Reference
Numeric data. For numeric data, you have the option of using
exponential notation or using suffixes to indicate which unit is being used.
Tables A-l and A-2 in appendix A list all available suftiies. Do not
combine an exponent with a unit. The following numbers are all equal:
28 = 0.2SE2 = 2SOe-1 = 2SOOOm = 0.028K.
The base of a number is shown with a prefix. The available bases are
binary (#B), octal (#a), hexadecimal (#H) and decimal (default). For
example, #BlllOO = #Q34 = #HlC = 28. You may not specify a
base in conjunction with either exponents or unit suffixes. Additionally,
negative numbers must be expressed in decimal.
When a syntax definition specifies that a number is an integer, that means
that the number should be whole. Any fractional part would be ignored,
truncating the number. Numeric parameters which accept fractional
values are called real numbers.
All numbers are expected to be strings of ASCII characters. Thus, when
sending the number 9, you would send a byte representing the ASCII code
for the character "9" (which is 57, or 00111001 in binary). A three-digit
number like 102 would take up three bytes (ASCII codes 49,48 and 50).
This is taken care of automatically when you include the entire instruction
in a string.
String data. String data may be delimited with either single (`) or double
(") quotes. String parameters representing labels are case-sensitive. For
instance, the labels "Bus A" and "bus a" are unique and should not be used
indiscriminately. Also pay attention to the presence of spaces, since they
act as legal characters just like any other. So the labels "In" and ' In' are
also two separate labels.
Keyword data. In many cases a parameter must be a keyword. The
available keywords are always included with the instruction's syntax
definition. When sending commands, either the longform or shortform (if
one exists) may be used. Upper-case and lower-case letters may be mixed
freely. When receiving responses, upper-case letters will be used
exclusively. The use of longform or shortform in a response depends on
the setting you last specified via the SYSTem:LONGform command (see
chapter 6).
HP 1650B/HP 1651B Introduction to Programming an instrument
Programming Reference 1-9
Instruction Terminator An instruction is executed after the instruction terminator is received.
The terminator is the NL (New Line) character. The NL character is an
ASCII linefeed character (decimal 10).
l ' The NL (New Line) terminator has the same function as an EOS (End Of
Note @ String) and EOT (End Of Text) terminator.
Selecting Multiple You can send multiple program commands and program queries for
Subsystems different subsystems on the same line by separating each command with a
semicolon. The colon following the semicolon enables you to enter a new
subsystem. For example:
< instruction header > ;: c instruction header > -c terminator >
:MACHINEl:ASSIGN2;:SYSTEM:HEADERS ON
,I[' Multiple commands may be any combination of simple, compound and
Note d common comm ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo