Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent 8642B 08642-90224
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 08642-90224 documenatation <<
Text preview - extract from the document
Errata
Title & Document Type: 8642A/B Synthesized Signal Generator
Operation and Calibration Manual
Manual Part Number: 08642-90224
Revision Date: 1996-03-01
HP References in this Manual
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. We have made no changes to this
manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.
For example, model number HP8648A is now model number Agilent 8648A.
About this Manual
We've added this manual to the Agilent website in an effort to help you support your
product. This manual provides the best information we could find. It may be incomplete
or contain dated information, and the scan quality may not be ideal. If we find a better
copy in the future, we will add it to the Agilent website.
Support for Your Product
Agilent no longer sells or supports this product. You will find any other available
product information on the Agilent Test & Measurement website:
www.tm.agilent.com
Search for the model number of this product, and the resulting product page will guide
you to any available information. Our service centers may be able to perform calibration
if no repair parts are needed, but no other support from Agilent is available.
Errata
Title & Document Type: 8642A/B Synthesized Signal Generator Operation
and Calibration Manual
Manual Part Number: 08642-90224
Revision Date: 1996-03-01
HP References in this Manual
This manual may contain references to HP or Hewlett-Packard. Please note that Hewlett-
Packard's former test and measurement, semiconductor products and chemical analysis
businesses are now part of Agilent Technologies. We have made no changes to this
manual copy. The HP XXXX referred to in this document is now the Agilent XXXX.
For example, model number HP8648A is now model number Agilent 8648A.
About this Manual
We've added this manual to the Agilent website in an effort to help you support your
product. This manual provides the best information we could find. It may be incomplete
or contain dated information, and the scan quality may not be ideal. If we find a better
copy in the future, we will add it to the Agilent website.
Support for Your Product
Agilent no longer sells or supports this product. You will find any other available
product information on the Agilent Test & Measurement website:
www.tm.agilent.com
Search for the model number of this product, and the resulting product page will guide
you to any available information. Our service centers may be able to perform calibration
if no repair parts are needed, but no other support from Agilent is available.
Model 8642A/B Operation
Section 3
OPERATION
INTRODUCTION TO SECTION
Ill
The information in this section describes both general and specific operation of the HP 8642A/B.
If you have no experience with the Signal Generator, you should first read Operating Fundamentals
(included with this Volume I as a separate booklet) which is intended only as a familiarization guide.
Although this Section III can be used to learn basic operation, you might feel there is more information
here than you need. After you read Operating Fundamentals you can use this Operation Section for
additional information.
Figure 3-l in Operating Information (page 3-3) is a graphic representation of the Signal Generator's
basic operation. This figure shows most of the keys that you use to operate the instrument. Similar
diagrams that show more specific functions (and their associated keys) are available on pages 3-34,
3-38, 3-68, 3-96, 3-136, 3-156, 3-166, and 3-178. Figure 3-2 on page 3-4 shows rear-panel features.
The major functions of this section are grouped as follows:
Operating Information
HP-IB Remote Operation
Detailed Operating Instructions
RF Frequency
Amplitude
Modulation
Setting Modifications
Recall Registers
Special Functions
Messages
Appendixes
Index
OPERATOR CHECKS
Since the Signal Generator performs self-checks, no operator checks are necessary. However, extensive
self-diagnostics are available. Refer to the Service Section (Volumes 2 through 4).
A flashing display indicates that an operating message is present. Refer to the tabbed Messages
information later in this section for details.
rev.3OSEP88 3-l
Operation Model 8642A/B
Amplitude Sweep (cont'd)
122. Linear Amplitude Sweep. This special function selects a linearly stepped
output rather than the usual logarithmicly stepped output. Use a sweep time greater
than 900 ms to obtain maximum sweep resolution.
222. Logarithmic Amplitude Sweep. This special function selects the usual
logarithmicly stepped output disabled with Special Function 122.
Related
Operating
Instructions Refer to Knob (page 3- 14 1) and Step, Increment Set (page 3-149) for information on
using these to modify settings.
Refer to Instrument Preset, Partial Preset (page 3-139) for information on setting the
instrument to an initialized state that maintains preset references including the
selected amplitude units.
Refer to Operating Messages (page 3- 17 7) if the instrument displays a message you
want clarified.
Refer to Special Functions (page 3- 165) for information about the way these are
accessed.
3-94
R4odel 8642A/B Appendix A
Appendix A: GLOSSARY
absolute units
In the 8642A/B, absolute units are units that can be set directly without using the relative
amplitude mode. These include dBm, V, mV, uV, EMF V, EMF mV, and EMF uV.
active function
When a function is active, you do not need to select the function's key before changing its value
with either the Knob, or Step or Data keys, or the Off/On key. A function is usually indicated
as active when the cursor in the display is above that function's value.
For example, if the cursor is over the RF frequency value, you can enter a new frequency value
or use the Knob or Step keys to change the value. You do not need to press the C-1 key
each time a change is desired.
active function prefix
Many HP-IB codes should not be entered without being prefixed by an active function code. For
a list of the active function codes and the codes that should be prefixed with an active function
code, refer to Table 3-8, Signal Generator Function to HP-IB Code (page 3-32) or Table 3-9,
Signal Generator HP-IB Code to Function (page 3- 3 3).
alphanumeric
The 8642A/B has an alphanumeric display; that is, the display can show both alphabetic and
numeric characters.
ASCII
ASCII is an abreviation for American Standard Code for Information Interchange (pronounced
"ask-eel').
cursor
The cursor is the triangular segment above an alphanumeric character in the display. The cursor
usually designates the active function and the resolution of the Knob. Cursors also indicate the
status of Knob Hold and Knob Increment. Refer to Knob, page 3- 14 1.
divide bands
Divide bands are created when the Signal Generator's frequency range of 528.750001 to 1057.5
is divided down to create its wide RF frequency range. Refer RF Frequency, page 3-39.
function
A function refers to each capability of the 8642A/B.
Key functions are labeled directly on the key that accessed the function; frequency L (FREa) )
and amplitude ( (AMPTD) ) are both key functions.
Shift key functions are labeled in blue above the key that accesses the function (for example,
REF SET and REL ZERO). You can access a shift key function by first pressing the blue
ISHIFT) key (which causes the display to show "SHIFT") and then the key under the blue label.
(HP-IB: each shift key function has an individual HP-IB code and should not be preceded by a
shift code.)
Special functions can be selected by pressing SPCL ( (SHIFT) [-I ), and then by keying in the
code number of the desired special function. Refer to Special Functions, page 3- 16 8.
3-199
Model 8642A/B Index
INDEX
10 MHz OUT, 3-3 E
10 MHz OVEN OUT, 3-3
EMF, 3-71
ENT ADRS, 3-8, 3-34
A ENTRY OFF, 3-143, 3-153
Abbreviations, in the display, 3-207 Errors (see messages), 3-179
AC (see EXT AC), 3-207 EXT AC
Active function, 3-199 AM, 3-98
AM/PULSE INPUT, 3-99 FM, 3-108
Amplitude sweep, 3-83 @M, 3-121
Display resolution limits in MANUAL, 3-9 Pulse Modulation, 3-128
Modulation types not possible during, 3-92 EXT DC
Relative settings, 3-93 AM, 3-98
Step size, 3-83, 3-86 FM, 3-108
Zero span, 3-92 +M, 3-121
Amplitude units conversion, 3-205 Pulse Modulation, 3-128
Amplitude, 3-69 EXT REF INPUT, 3-3
Increment set values possible, 3-73
Overranging, 3-72 F
Resolution in dB, 3-73 Familiarization, 3-1
AMPTD OFF ON, 3-72 Flashing display, 3-1
AMPTD, 3-70 FM/+M INPUT, 3-108, 3-122
AM, 3-97 FM, 3-105
EXT AC, EXT DC, 3-98 Deviation limits affected by heterodyne band, 3-105
INT, 3-98 Deviation limits affected by pre-emphasis, 3-105
Maximum settings, 3-102 EXT AC, EXT DC, 3-108
Mixed modulation, 3-101 External modulation, 3-110
Modulation restrictions with other functions, 3-101 Harmonic distortion, 3-115
Rates increased using heterodyne band, 3-101 INT, 3-107
Annunciators, in the display, 3-207 Low residual, 3-112
Arrow keys, 3-141 Maximum stereo separation, 3-112, 3-116
ASCII character codes, 3-203 Mixed modulation, 3-101, 3-124
AUTO (sweep mode) Modulation restrictions with other functions, 3-110
Amplitude, 3-84 Pre-emphasis, 3-113
Frequency, 3-51 FREQ, 3-40
Frequency reference
B Display the, 3-46
Range of settings, 3-47
Basic operation, 3-l Turn it off, how to, 3-47
Battery power lost Frequency sweep, 3-49
HP-IB address, 3-8 AUTO sweep setting limitations, 3-51
Recall registers, 3-157 Modulation types not possible during, 3-64
Sequence function, 3-137 Step size, 3-49, 3-52
Sweep time, common to all sweeps, 3-64, 3-92
C Sweep time, how to set, 3-52, 3-86
X-Axis steps, 3-60
Calibration messages, 3-179 Zero span, 3-65
Converting amplitude units, 3-201, 3-205 Frequency, 3-39
Cursor positioning keys, 3-141 How to set, 3-39, 3-40
Cursors, multiple, 3-145 Overranging, 3-42
Phase adjust, 3-42
D Resolution of 0.1 Hz, 3-42
Switching time, 3-39
DB, 3-208
Underranging, 3-42
DC (see EXT DC), 3-207
FRQ SWEEPING (abbreviation), 3-49
Detailed Operating Instructions, 3-35
Function, 3-199
Display annunciators and abbreviations, 3-207
Display, flashing, 3-l G
Divide bands, 3-38, 3-199
DM, 3-208 Glossary, 3-199
3-209
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo