Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent HP 4287A Operation

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download HP 4287A Operation documenatation <<

Text preview - extract from the document

                              Caution
       Do not exceed the operating input power, voltage, and current
level and signal type appropriate for the instrument being used, refer to
your instrument's Function Reference.


        Electrostatic discharge(ESD) can damage the highly sensitive
microcircuits in your instrument. ESD damage is most likely to occur as
the test fixtures are being connected or disconnected. Protect them from
ESD damage by wearing a grounding strap that provides a high
resistance path to ground. Alternatively, ground yourself to discharge any
static charge built-up by touching the outer shell of any grounded
instrument chassis before touching the test port connectors.
                      Safety Summary
When you notice any of the unusual conditions listed below, immediately
terminate operation and disconnect the power cable.
Contact your local Agilent Technologies sales representative or
authorized service company for repair of the instrument. If you continue
to operate without repairing the instrument, there is a potential fire or
shock hazard for the operator.

       - Instrument operates abnormally.
       - Instrument emits abnormal noise, smell, smoke or a spark-like
           light during operation.
       - Instrument generates high temperature or electrical shock
           during operation.
       - Power cable, plug, or receptacle on instrument is damaged.
       - Foreign substance or liquid has fallen into the instrument.
Herstellerbescheinigung
   
GERAUSCHEMISSION

 LpA   < 70 dB
 am Arbeitsplatz
 normaler Betrieb
 nach DIN 45635 T. 19




Manufacturer's Declaration
ACOUSTIC NOISE EMISSION

 LpA   < 70 dB
 operator position
 normal operation
 per ISO 7779
                        Regulatory compliance information



This product complies with the essential requirements of the following applicable European Directives, and
carries the CE marking accordingly:


           The Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
           The EMC Directive 89/336/EEC, amended by 93/68/EEC


To obtain Declaration of Conformity, please contact your local Agilent Technologies sales office, agent or
distributor.
                                Safety notice supplement


 This equipment complies with EN/IEC61010-1:2001.
 This equipment is MEASUREMENT CATEGORY I (CAT I). Do not use for CAT II, III, or IV.
 Do not connect the measuring terminals to mains.
 This equipment is POLLUTION DEGREE 2, INDOOR USE product.
 This equipment is tested with stand-alone condition or with the combination with the accessories supplied
  by Agilent Technologies against the requirement of the standards described in the Declaration of
  Conformity. If it is used as a system component, compliance of related regulations and safety requirements
  are to be confirmed by the builder of the system.
                                 Agilent 4287A RF LCR Meter


                                Operation Manual
                                             Eleventh Edition
                                FIRMWARE REVISIONS/SERIAL NUMBERS
This manual applies directly to instruments that have the firmware revision 2.0x and serial number prefix MY433.
      For additional important information about firmware revisions and serial numbers, see Appendix A.




                                        Agilent Part No. 04287-90024
                                                December 2005
Notices
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be photocopied, reproduced, or translated to
another language without the prior written consent of Agilent Technologies.
Microsoft

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo