Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent HP 8360A Series User
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download HP 8360A Series User documenatation <<
Text preview - extract from the document
HP 8360 Series Synthesized Sweepers
(Including Options 001, 003, 004, 006, and 008)
User's Handbook
SERIAL NUMBERS
This manual applies directly to any synthesized sweeper with serial
number prefix combinations. You may have to modify this manual
so that it applies directly to your instrument version. Refer to the
"Instrument History" chapter.
HP 83620A/22A/24A HP 83623A HP 83630A HP 83640A HP 83650A
3420A 3420A 3420A 3420A 3420A
3250A 3339A 3250A 3339A 3250A
3245A 3250A 3245A 3250A 3245A
3213A 3245A 3213A 3245A 3213A
3145A 3213A 3145A 3213A 3145A
3143A 3145A 3143A 3145A 3143A
3119A 3143A 3119A 3143A 3052A
3108A 3119A 3108A 3101A
3104A 3108A 3104A
3102A 3104A 3102A
3050A 3102A 3050A
3044A 3050A 3044A
3036A 3044A 3036A
3036A
HP Part No. 08380-90070
Microfiche Part No. 08380-90073
Printed in USA November 1995
Edition 9
Notice The information contained in this document is subject to change
without notice.
Hewlett-Packard makes no warranty of any kind with regard to this
material, including but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard
shall not be liable for errors contained herein or for incidental
or consequential damages in connection with the furnishing,
performance, or use of this material.
Restricted Rights Use, duplication, or disclosure by the U.S. Government is subject
Legend to restrictions as set forth in subparagraph (c) (1) (ii) of the
Rights of Technical Data and Computer Software clause at DFARS
252.227-7013 for DOD agencies, and subparagraphs (c) (1) and
(c) (2) of the Commercial Computer Software Restricted Rights
clause at FAR 52.227-19 for other agencies.
@ Copyright Hewlett-Packard Company 1992, 1995
All Rights Reserved. Reproduction, adaptation, or translation
without prior written permission is prohibited, except as allowed
under the copyright laws.
1400 Fountaingrove Parkway, Santa Rosa, CA 95403-1799, USA
Certification Hewlett-Packard Company certifies that this product met its
published specifications at the time of shipment from the factory.
Hewlett-Packard further certifies that its calibration measurements
are traceable to the United States National Institute of Standards
and Technology, to the extent allowed by the Institute's calibration
facility, and to the calibration facilities of other International
Standards Organization members.
Warranty This Hewlett-Packard instrument product is warranted against
defects in material and workmanship for a period of one year from
date of shipment. During the warranty period, Hewlett-Packard
Company will, at its option, either repair or replace products which
prove to be defective.
For warranty service or repair, this product must be returned to a
service facility designated by Hewlett-Packard. Buyer shall prepay
shipping charges to Hewlett-Packard and Hewlett-Packard shall pay
shipping charges to return the product to Buyer. However, Buyer
shall pay all shipping charges, duties, and taxes for products returned
to Hewlett-Packard from another country.
Hewlett-Packard warrants that its software and firmware designated
by Hewlett-Packard for use with an instrument will execute
its programming instructions when properly installed on that
instrument. Hewlett-Packard does not warrant that the operation
of the instrument, or software, or firmware will be uninterrupted or
error-free.
L IMITATION OF W ARRANTY
The foregoing warranty shall not apply to defects resulting from
improper or inadequate maintenance by Buyer, Buyer-supplied
software or interfacing, unauthorized modification or misuse,
operation outside of the environmental specifications for the
product, or improper site preparation or maintenance.
NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.
HEWLETT-PACKARD SPECIFICALLY DISCLAIMS THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
E XCLUSIVE REMEDIES
THE REMEDIES PROVIDED HEREIN ARE BUYER'S SOLE
AND EXCLUSIVE REMEDIES. HEWLETT-PACKARD SHALL
NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL
THEORY.
...
III
Assistance Product maintenance agreements and other customer assistance
agreements are available for Hewlett-Packard products. For any
assistance, contact your nearest Hewlett-Packard Sales and Service
Ofice.
Safety Notes The following safety notes are used throughout this manual.
Familiarize yourself with each of the notes and its meaning before
operating this instrument.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if
not correctly performed or adhered to, would result in damage to or
destruction of the instrument. Do not proceed beyond a caution sign
until the indicated conditions are fully understood and met.
iv
General Safety
Considerations
WARNING l No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
n For continued protection against fire hazard replace line fuse only
with same type and rating (F 5A/25OV). The use of other fuses or
material is prohibited.
n This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
n This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only
be inserted in a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
n If this instrument is used in a manner not specified by
Hewlett-Packard Co., the protection provided by the instrument may
be impaired. This product must be used in a normal condition (in
which all means for protection are intact) only.
V
CAUTION H Before switching on this instrument, make sure that the line
voltage selector switch is set to the voltage of the power supply and
the correct fuse is installed.
n Always use the three-prong ac power cord supplied with this
instrument. Failure to ensure adequate earth grounding by not
using this cord may cause instrument damage.
n Before switching on this product, make sure that the line voltage
selector switch is set to the voltage of the power supply and
the correct fuse is installed. Assure the supply voltage is in the
specified range.
w Ventilation Requirements: When installing the instrument in a
cabinet, the convection into and out of the instrument must not be
restricted. The ambient temperature (outside the cabinet) must be
less than the maximum operating temperature of the instrument
by 4 "C for every 100 watts dissipated in the cabinet. If the total
power dissipated in the cabinet is greater than 800 watts, then
forced convection must be used.
n This product is designed for use in Installation Category II and
Pollution Degree 2 per IEC 1010 and 664, respectively.
Note The detachable power cord is the instrument disconnecting device.
It disconnects the mains circuits from the mains supply before other
parts of the instrument. The front panel switch is only a standby
switch and is not a LINE switch.
vi
PREFACE This manual provides user information for the HP 8360 Series
Synthesized Sweepers.
Instruments Covered This manual applies to instruments having a serial number prefix
listed on the title page (behind the "Documentation Map" tab).
By This Manual Some changes may have to be made to this manual so that it
applies directly to each instrument; refer to Chapter 5, "Instrument
History", to see what changes may apply to your instrument.
A serial number label (Figure O-l) is attached to the instrument's
rear panel. A prefix (four digits followed by a letter), and a suffix
(five digits unique to each instrument), comprise the instrument
serial number.
SERIAL NUMBER
PREFIX SUFFIX
-f----l
i SER 1234A 1 2 3 4 5 7
INSTALLED
OPTIONS
Figure O-l. Typical Serial Number Label
An instrument's prefix that is not listed on the title page may
indicate that the instrument is different from those documented
in this manual. For serial number prefixes before those listed
on the title page, refer to the HP 8360 Series Synthesized
Sweepers Instrument History (to order, see "Replaceable Parts" in
Assembly-Level Repair).
vii
User's Handbook Tabs divide the major chapters of this manual. The contents of each
chapter is listed in the "Table of Contents."
Organization
HP 8360 Series Documentation Map
Documentation For a pictorial representation of the HP 8360 series documentation,
see the "Documentation Map" at the front of this manual.
Ordering Manual
A manual part number is listed on the title page of this manual. You
may use it to order extra copies of this manual. See "Replaceable
Parts" in Assembly-Level Repair for a complete list of HP 8360
documentation and ordering numbers.
Typeface The following conventions are used in the HP 8360 series
documentation:
Conventions
Italics Italic type is used for emphasis, and for titles of manuals and
other publications.
Computer Computer type is used for information displayed on the
instrument. For example: In this sequence, POWER LEVEL is displayed.
(-1 Instrument keys are represented in "key cap." You are
instructed to press a hardkey.
Softkeys Softkeys are located just below the display, and their
functions depend on the current display. These keys are represented
in "softkey." You are instructed to select a softkey.
Regulatory This product has been designed and tested in accordance with IEC
Publication 1010, Safety Requirements for Electronic Measuring
Information Apparatus, and has been supplied in a safe condition. The
instruction documentation contains information and warnings
which must be followed by the user to ensure safe operation and to
maintain the instrument in a safe condition.
Manufacturer's
Declaration
Note This is to certify that this product meets the radio frequency
interference requirements of Directive FTZ 1046/1984. The German
Bundespost has been notified that this equipment was put into
circulation and has been granted the right to check the product type
for compliance with these requirements.
Note: If test and measurement equipment is operated with
unshielded cables and/or used for measurements on open set-ups, the
user must insure that under these operating conditions, the radio
frequency interference limits are met at the border of his premises.
Model HP 8360 Series Synthesized Sweepers
Note Hiermit wird bescheinigt, dass dieses Gerat/System in
Ubereinstimmung mit den Bestimmungen von Postverfiigung 1046/84
funkentstijrt ist .
Der Deutschen Bundespost wurde das Inverkehrbringen dieses
GerHtes/Systems angezeight und die Berechtigung zur fiberpriifung
der Serie auf Einhaltung der Bestimmungen eingeraumt.
Zustzinformation fur Mess-und Testgerate:
Werden Mess- und Testgerate mit ungeschirmten Kabeln und/oder
in offenen Messaufbauten verwendet, so ist vom Betreiber
sicherzustellen, dass die Funk-Entstorbestimmungen unter
Betriebsbedingungen an seiner Grundstiicksgrenze eingehalten
werden.
ix
Notice for Germany:
Noise Declaration LpA < 70 dB
am Arbeitsplatz (operator position)
normaler Betrieb (normal position)
nach DIN 45635 T. 19 (per IS0 7779)
Declaration of
Conformity
X
DECLARATION OF CONFORMITY
accor&g to ISOIIEC Quide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Co.
Manufacturer's Address: Microwave Instruments Division
1400 Fountaingrove Parkway
Santa Rosa, CA 95403-1799
USA
declares that the product
Product Name: Synthesized Sweeper
Model Numbers: HP 8362OA, HP 8362lA, HP 83622A,
HP 83623A, HP 83624A, HP 8363OA,
HP 8363lA, HP 8364OA, HP 36642A,
HP 8365OA, HP 83651A
Product Options: This declaration covers all options of the
above products.
conforms to the following Product specifications:
Safety: IEC 348:1978/HD 401 Sl:l981
CANZSA-C22.2 No. 231 (Series M-89)
EMC: ClSPR 11:199O/EN 55011:1991 Group 1, Class A
/EC 801-2:1984/EN 50082-1:1992 4 kV CD, 8 kVAD
/EC 801-3:1984/EN 50082-1:1992 3 V/m, 27-500 MHz
/EC 80 f-4: 1988/EN 50082- 1: 1992 0.5 kV Sig. Lines, 1 kV Power Lines
Supplementary Information:
The product herewith complies with the requirements of the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC.
Santa Rosa, California, USA 2 Oct. 1995
European Contact: Your local Hewlett-Packard &/es and Service Office or Hewlett-Packard QmbH, Department HQ-TRE,
Herrenberger Sttasse 130, D-71034 Biiblingen Germany(FAX+4&7031-163143)
xi
Instrument MarkingsA
! The instruction documentation symbol. The product is
marked with this symbol when it is necessary for the
user to refer to the instructions in the documentation.
Cd The CE mark is a registered trademark of the European
Community.
The CSA mark is a registered trademark of the
Canadian Standards Association.
"ISMl-A" This is a symbol of an Industrial Scientific and Medical
Group 1 Class A product.
I This is an ON symbol. The symbol ON is used to mark
the position of the instrument power line switch.
I This is an ON symbol. The symbol ON is used to mark
the position of the instrument power line switch.
This is a STANDBY symbol. The STANDBY symbol is
0
used to mark the position of the instrument power line
switch.
This is an OFF symbol. The OFF symbol is used to
I
mark the position of the instrument power line switch.
This is an AC symbol. The AC symbol is used to
indicate the required nature of the line module input
power.
xii
Hewlett-Packard Sales and Service Offices
US FIELD OPERATIONS
Headquarters California, Northern California, Southern
Hewlett-Packard Co. Hewlett-Packard Co. Hewlett-Packard Co.
19320 Pruneridge Avenue 301 E. Evelyn 1421 South Manhattan Ave.
Cupertino, CA 95014 Mountain View, CA 94041 Fullerton, CA 92631
(800) 752-0900 (415) 694-2000 (714) 999-6700
Colorado Georgia Illinois
Hewlett-Packard Co. Hewlett-Packard Co. Hewlett-Packard Co.
24 Inverness Place, East 2000 South Park Place 5201 Tollview Drive
Englewood, CO 80112 Atlanta, GA 30339 Rolling Meadows, IL 60008
(303) 649-5512 (404) 955-1500 (708) 255-9800
New Jersey Texas
Hewlett-Packard Co. Hewlett-Packard Co.
150 Green Pond Rd. 930 E. Campbell Rd.
Rockaway, NJ 07866 Richardson, TX 75081
(201) 586-5400 (214)231-6101
EUROPEAN FIELD OPERATIONS
Headquarters France Germany
Hewlett-Packard S.A. Hewlett-Packard France Hewlett-Packard GmbH
150, Route du Naut-d'Avri1 1 Avenue Du Canada Hewlett-Packard Strasse
1217 Meyrin 2JGeneva Zone D'Activite De Courtaboeuf 61352 Bad Homburg v.d.H
Switzerland F-91947 Les Ulis Cedex Germany
(41 22)780.8111 France (49 6172) 16-O
(33 1)69 82 60 60
Great Britain
Hewlett-Packard Ltd.
Eskdale Road, Winnersh Triangle
Wokingham, Berkshire RG41 5DZ
England
(44 734) 696622
INTERCON FIELD OPERATIONS
Headquarters Australia Canada
Hewlett-Packard Company Hewlett-Packard Australia Ltd. Hewlett-Packard (Canada) Ltd.
3495 Deer Creek Road 31-41 Joseph Street 17500 South Service Road
Palo Alto, California, USA Blackburn, Victoria 3130 Tram-Canada Highway
94304-1316 (61 3) 895-2895 Kirkland, Quebec H9J 2X8
(415) 857-5027 Canada
(514) 697-4232
China Japan Singapore
China Hewlett-Packard Company Hewlett-Packatid Japan, Ltd. Hewlett-Packard Singapore (Pte.) Ltd.
38 Bei San Huan Xl Road 1-27-15 Yabe, Sagamihara 150 Beach Road
Shuaug Yu Shu Kauagawa 229, Japan #29-00 Gateway West
Hai Dian District (81 427)59-1311 Singapore 0718
Beijing, China (65) 291-9088
(86 1) 2566888
Taiwan
Hewlett-Packard Taiwan
8th Floor, H-P Building
337 Fu Hsing North Road
Taipei, Taiwan
:886 2) 712-0404
.. .
XIII
Contents
1. GETTING STARTED
What Is In This Chapter . . . . . . . . . . . . l-l
How To Use This Chapter . . . . . . . . . . . . l-2
Equipment Used In Examples . . . . . . . . . l-2
Introducing the HP 8360 Series Synthesized Sweepers l-3
Display Area . . . . . . . . . . . . . . . . . . l-4
Entry Area . . . . . . . . . . . . . . . . . . l-5
CW Operation and Start/Stop Frequency Sweep . . l-6
CW Operation . . . . . . . . . . . . . . . . . l-6
Start/Stop Frequency Sweep . . . . . . . . . . l-6
Center Frequency/Span Operation . . . . . . . . l-8
Power Level and Sweep Time Operation . . . . . . l-10
Power Level Operation . . . . . . . . . . . . l-10
Sweep Time Operation . . . . . . . . . . . . l-10
Continuous, Single, and Manual Sweep Operation . 1-12
Marker Operation . . . . . . . . . . . . . . . 1-14
Saving and Recalling an Instrument State . . . . . 1-16
Power Sweep and Power Slope Operation . . . . . 1-18
Power Sweep Operation . . . . . . . . . . . . 1-18
Power Slope Operation . . . . . . . . . . . . 1-19
Getting Started Advanced . . . . . . . . . . . . 1-21
Externally Leveling the Synthesizer . . . . . . . . l-23
Leveling with Detectors/Couplers /Splitters . . . l-23
External Leveling Used With the Optional Step
Attenuator . . . . . . . . . . . . . . . l-26
Leveling with Power Meters . . . . . . . . . . l-27
Leveling with MM-wave Source Modules . . . . . l-28
Working with Mixers/Reverse Power Effects . . . . l-30
Working with Spectrum Analyzers/Reverse Power
Effects . . . . . . . . . . . . . . . . . . . l-32
Optimizing Synthesizer Performance . . . . . . . l-33
Creating and Applymg the User Flatness Correction
Array . . . . . . . . . . . . . . . . . . l-33
Creating a User Flatness Array Automatically,
Example 1 . . . . . . . . . . . . . . . l-34
Creating a User Flatness Array, Example 2 . . l-36
Swept mm-wave Measurement with Arbitrary
Correction Frequencies, Example 3 . . . . l-39
Scalar Analysis Measurement with User Flatness
Corrections, Example 4 . . . . . . . . . l-43
Using Detector Calibration . . . . . . . . . . l-47
Using the Tracking Feature . . . . . . . . . . l-49
HP 8360 Contents-l
User's Handbook
Peaking . . . . . . . . . . . . . . . . . . l-49
Tracking . . . . . . . . . . . . . . . . . l-49
ALC Bandwidth Selection . . . . . . . . . . . . l-50
Using Step Sweep . . . . . . . . . . . . . . . 1-51
Creating and Using a Frequency List . . . . . . . l-52
Using the Security Features . . . . . . . . . . . l-53
Changing the Preset Parameters . . . . . . . . . l-54
Getting Started Programming . . . . . . . . . . l-55
HP-IB General Information . . . . . . . . . . . l-56
Interconnecting Cables . . . . . . . . . . . . l-56
Instrument Addresses . . . . . . . . . . . . . l-56
HP-IB Instrument Nomenclature . . . . . . . . l-56
Listener . . . . . . . . . . . . . . . . . . l-56
Talker. . . . . . . . . . . . . . . . . . . l-56
Controller . . . . . . . . . . . . . . . . . l-56
Programming the Synthesizer . . . . . . . . . l-56
HP-IB Command Statements . . . . . . . . . l-57
Abort . . . . . . . . . . . . . . . . . . . l-57
Remote . . . . . . . . . . . . . . . . . . l-58
Local Lockout . . . . . . . . . . . . . . . 1-58
Local . . . . . . . . . . . . . . . . . . . l-59
Clear . . . . . . . . . . . . . . . . . . . l-59
output . . . . . . . . . . . . . . . . . . l-60
Enter . . . . . . . . . . . . . . . . . . . 1-61
Getting Started with SCPI . . . . . . . . . . . l-63
Definitions of Terms . . . . . . . . . . . . . . l-63
Standard Notation . . . . . . . . . . . . . . l-64
Command Mnemonics . . . . . . . . . . . l-64
Angle Brackets . . . . . . . . . . . . . . . l-64
How to Use Examples . . . . . . . . . . . . . l-64
Command Examples . . . . . . . . . . . . l-64
Response Examples . . . . . . . . . . . . . l-65
Essentials for Beginners . . . . . . . . . . . . . l-66
Program and Response Messages . . . . . . . l-66
Forgiving Listening and Precise Talking . . . . l-66
Types of Commands . . . . . . . . . . . . l-67
Subsystem Command Trees . . . . . . . . . . l-67
The Command Tree Structure . . . . . . . . l-67
Paths Through the Command Tree . . . . . . l-68
Subsystem Command Tables . . . . . . . . . . 1-71
Reading the Command Table . . . . . . . . 1-71
More About Commands . . . . . . . . . . . l-72
Query and Event Commands . . . . . . . . l-72
Implied Commands . . . . . . . . . . . . l-72
Optional Parameters . . . . . . . . . . . l-72
Program Message Examples . . . . . . . . . l-72
Parameter Types . . . . . . . . . . . . . . l-73
Numeric Parameters . . . . . . . . . . . l-73
Extended Numeric Parameters . . . . . . . l-74
Discrete Parameters . . . . . . . . . . . l-74
Boolean Parameters . . . . . . . . . . . l-75
Contents-2 HP 8360
User's Handbook
Reading Instrument Errors . . . . . . . . . . l-75
Example Programs . . . . . . . . . . . . . . l-76
Example Program . . . . . . . . . . . . . l-76
Description . . . . . . . . . . . . . . . l-76
Program Listing . . . . . . . . . . . . . l-76
Program Comments . . . . . . . . . . . l-77
Details of Commands and Responses . . . . . . . l-79
In This Subsection . . . . . . . . . . . . . . l-79
Program Message Syntax . . . . . . . . . . . l-79
Subsystem Command Syntax . . . . . . . . l-80
Common Command Syntax . . . . . . . . . l-80
Response Message Syntax . . . . . . . . . . . 1-81
SCPI Data Types . . . . . . . . . . . . . . l-82
Parameter Types . . . . . . . . . . . . . . l-82
Numeric Parameters . . . . . . . . . . . l-82
Extended Numeric Parameters . . . . . . . l-83
Discrete Parameters . . . . . . . . . . . l-84
Boolean Parameters . . . . . . . . . . . l-84
Response Data Types . . . . . . . . . . . . l-84
Real Response Data . . . . . . . . . . . l-84
Integer Response Data . . . . . . . . . . l-85
Discrete Response Data . . . . . . . . . . l-85
String Response Data . . . . . . . . . . . l-85
Programming Typical Measurements . . . . . . . l-86
In This Subsection . . . . . . . . . . . . . . l-86
Using the Example Programs . . . . . . . . . l-86
Use of the Command Tables . . . . . . . . . l-87
HP-IB Check, Example Program 1 . . . . . . . 1-88
Program Comments . . . . . . . . . . . . l-89
Local Lockout Demonstration, Example Program 2 l-89
Program Comments . . . . . . . . . . . . l-90
Setting Up A Typical Sweep, Example Program 3 l-90
Program Comments . . . . . . . . . . . . 1-91
Queries, Example Program 4 . . . . . . . . . . l-92
Program Comments . . . . . . . . . . . . l-92
Saving and Recalling States, Example Program 5 . l-93
Program Comments . . . . . . . . . . . . l-94
Looping and Synchronization, Example Program 6 l-95
Program Comments . . . . . . . . . . . . l-95
Using the *WA1 Command, Example Program 7 . l-96
Program Comments . . . . . . . . . . . . l-97
Using the User Flatness Correction Commands,
Example Program 8 . . . . . . . . . . . . l-98
Programming the Status System . . . . . . . . . l-101
In This Subsection . . . . . . . . . . . . . . l-101
General Status Register Model . . . . . . . . . l-101
Condition Register . . . . . . . . . . . . . l-101
Transition Filter . . . . . . . . . . . . . . l-102
Event Register . . . . . . . . . . . . . . . l-102
Enable Register . . . . . . . . . . . . . . l-102
An Example Sequence . . . . . . . . . . . l-102
HP 8360 Contents-3
User's Handbook
Programming the Trigger System . . . . . . . . . l-104
In This Subsection . . . . . . . . . . . . . . l-104
Generalized Trigger Model . . . . . . . . . . . l-104
Overview . . . . . . . . . . . . . . . . . l-104
Details of Trigger States . . . . . . . . . . . l-105
Inside the Idle State . . . . . . . . . . . l-105
Inside the Initiate State . . . . . . . . . . l-106
Inside Event Detection States . . . . . . . l-107
Inside the Sequence Operation State . . . . l-109
Common Trigger Configurations . . . . . . . . l-109
The INIT Configuration . . . . . . . . . . . l-109
The TRIG Configuration . . . . . . . . . . l-110
Description of Triggering in the HP 8360 Series
Synthesizers . . . . . . . . . . . . . . . l-111
Advanced Trigger Configurations . . . . . . . 1-112
Trigger Keyword Definitions . . . . . . . . . . 1-112
ABORt . . . . . . . . . . . . . . . . . . 1-113
IMMediate . . . . . . . . . . . . . . . . 1-113
ODELay . . . . . . . . . . . . . . . . . 1-113
SOURce . . . . . . . . . . . . . . . . . . 1-113
Related Documents . . . . . . . . . . . . . . . 1-114
The International Institute of Electrical and
Electronics Engineers. . . . . . . . . . . . 1-114
Hewlet t-Packard Company . . . . . . . . . . . l-114
2. OPERATING AND PROGRAMMING REFERENCE
How To Use This Chapter . . . . . . . . . . . . 2-l
A.
Address . . . . . . . . . . A-l
Adrs Menu . . . . . . . . .......... A-l
@-
LJ . . . . . . . . . . .......... A-3
AI,C 3andwidth Select Autc1 .......... A-10
hLC Bandwidth Select High .......... A-10
ALC Bandwidth Selsct Low .......... A-11
AI..C BW Menu . . . . . . . .......... A-11
81 .tmate Regs . . . . . . .......... A-12
hM BW Cal Always . . . . .......... A-12
AM BW Cal Once . . . . . . .......... A-13
AYI Cal Menu . . . . . . . .......... A-13
AMMenu . . . . . . . . . .......... A-14
hM On/Off 10 dB/V . . . . A-15
AM On/Off 100%/V . . . . A-15
AM On/Off Ext . . . . . . A-16
hM On/Off Int . . . . . . A-17
Amp1 Markers . . . . . . . A-17
AM Type IO dB/V . . . . . A-18
Contents-4 HP 8360
User's Handbook
hM Type 100%fV . . . . . . . . . . . . . . . . A-19
ANALYZER STATUS REGISTER . . . . . . . . A-19
ArrowKeys . . . . . . . . . . . . . . . . . . A-21
(ASSIGN) .- . . . . . . . . . . . . . . . . . . A-22
Auto Fill Incr . . . . . . . . . . . . . . . A-23
Auto Fill %Pts . . . . . . . . . . . . . . . A-24
Auto Fill Start . . . . . . . . . . . . . . A-25
Auto Fill Stop . . . . . . . . . . . . . . . A-25
Auto Track . . . . . . . . . . . . . . . . . A-26
B.
Blank Disp . . . . . . . . . . . . . . . . . . B-l
C.
[CENTER). . . . ................ C-l
Center=Marker ................ c-2
Clear Fault . ................ c-2
Clear Memory . ................ c-3
Clear Point . ................ c-4
CONNECTORS ................ c-4
(CONT)
..................... c-12
Copy List . . . . . . . . . . . . . . . . . . c-13
CorPair Disable . . . . . . . . . . . . . . . c-13
Coupling Factor . . . . . . . . . . . . . . . c-14
@g . . . . . . . . . . . . . . . . . . . . . c-14
CW/CF Coupled . . . . . . . . . . . . . . . . c-15
D.
Dblr Amp Menu . . . . . . . . . . . . . . . . D-l
DeepAM . . . . . . . . . . . . . . . . . . . D-2
Delay Menu . . . . . . . . . . . . . . . . . . D-2
Delete Menu . . . . . . . . . . . . . . . . . D-3
Delete All . . . . . . . . . . . . . . . . . . D-3
Delete Current . . . . . . . . . . . . . . . . D-4
Delete Undef . . . . . . . . . . . . . . . . . D-5
Delta Ma&e+ . . . . . . . . . . . . . . . . . D-5
Delta Mkr Ref . . . . . . . . . . . . . . . . D-6
Disp Status . . . . . . . . . . . . . . . . . D-6
Doubler Amp Mode AUTO . . . . . . . . . . . . D-8
Doubler Amp Mode Off ............ D-9
Doubler Amp Hode On . . . . . . . . . . . . . D-10
Dwell Coupled . . . . . . . . . . . . . . . . D-10
HP 8360 Contents-6
User's Handbook
E.
8360 Adz-s .................. E-l
Enter Cum .................. E-l
EnterFreq .................. E-2
Enter List Dwell .............. E-2
Enter List Freq . . . . . . . . . . . . . . . E-3
Enter List Offset . . . . . . . . . . . . . . E-4
ENTRY KEYS . . . . . . . . . . . . . . . . . E-4
[ENTR~~N/OFF] . . . . . . . . . . . . . . . . . E-5
ExtDetCal ................. E-5
F.
Fault Menu . . . . . . . . . . . . . . . . . . F-l
Fault Info 1 . . . . . . . . . . . . . . . . . F-2
Fault Info 2 . . . . . . . . . . . . . . . . . F-3
Fault Info 3 . . . . . . . . . . . . . . . . . F-4
Fltness Menu . . . . . . . . . . . . . . . . . F-5
-
[FLTNESS ON/OFF) . . .............. F-11
FM Coupling 1OOkHz ............. F-11
FM Coupling DC . . .............. F-12
FM Menu . . . . . .............. F-13
FM On/Off AC . . . .............. F-14
FM On/Off DC . . . .............. F-14
FM On/Off Ext . . .............. F-15
FM On/Off Int . . .............. F-16
Freq Cal Menu . . .............. F-16
Freq Follow . . . .............. F-17
FREQUENCY @ki-) .............. F-17
Freq Mult . . . . .............. F-18
Freq Offset . . . .............. F-19
FullUsr Cal . . . . . . . . . . . . . . . . . F-20
G.
Global Dwell . . . . . . . . . . . . . . . . . G-l
Global Offset . . . . . . . . . . . . . . . . G-l
Contents-6 HP 8360
User's Handbook
H.
HP-IB Address . . . . . . . . . . . . . . . . . H-l
HP-IB Menu . . . . . . . . . . . . . . . . . . H-l
I.
Internal AM Depth . . . . . . . . . . . . . . I-l
Internal AM Rate .............. I-2
Internal AM Waveform Noise . . . . . . . . . I-2
Internal AM Waveform Ramp . . . . . . . . . . I-3
Internal AM Waveform Sine . . . . . . . . . . I-3
Internal AM Waveform Square . . . . . . . . . I-4
Internal AM Waveform Triangle . . . . . . . . I-4
Intexnal FM Deviation . . . . . . . . . . . . I-5
Internal FM Rate .............. I-5
Internal FM Waveform Noise . . . . . . . . . I-6
Internal FM Waveform Ramp . . . . . . . . . . I-6
Internal FM Waveform Sine . . . . . . . . . . I-7
Internal FM Waveform Square . . . . . . . . . I-7
Internal FM Waveform Triangle . . . . . . . . I-8
Internal Menu . . . . . . . . . . . . . . . . I-8
Internal Pulse Generator Period . . . . . . . I-9
Internal Pulse Generator Rate . . . . . . . . I-10
Internal Pulse Generator Width . . . . . . . I-10
Internal Pulse Mode Auto . . . . . . . . . . I-11
Internal Pulse Mode Gate . . . . . . . . . . I-11
Internal Pulse Mode Trigger . . . . . . . . . I-12
Invert Input . . . . . . . . . . . . . . . . . I-12
L.
Leveling ModeALCoff . . . . . . . . . . . . . L-l
Leveling ModeNormal . . . . . . . . . . . . . L-2
Leveling ModeSearch . . . . . . . . . . . . . L-2
Leveling PointExtDet ............ L-3
Leveling Pointlntml ............ L-3
Leveling PointModule . . . . . . . . . . . . L-4
Leveling PointPwrMtr ............ L-4
LINE SWITCH . . . . . . . . . . . . . . . . L-5
ListMenu . . . . . . . . . . . . . . . . . . L-5
List Mode Pt TrigAuto . . . . . . . . . . . . L-8
List Mode Pt TrigBus ............ L-8
List Mode Pt TrigExt ............ L-9
(LOCAL) . . . . . . . . . . . . . . . . . .
. . . L-9
HP 8360 Contents-7
User's Handbook
M.
MI--M2 Sweep . . . . . . . . . . : ...... M-l
Manual Sweep . . . . . . . . . . . . . . . . . M-l
(MARKER). . . . . . . . . . . . . . . . .
. . . M-3
MarkerMi . . . . . . . . . . . . . . . . . . M-4
Marker M2 . . . . . . . . . . . . . . . . . . M-5
MarkerM3 . . . . . . . . . . . . . . . . . . M-5
Marker M4 . . . . . . . . . . . . . . . . . . M-6
MarkerM5 . . . . . . . . . . . . . . . . . . M-6
Markers All Off . . . . . . . . . . . . . . . M-7
Measure Corx All .............. M-7
Measure Corr Current ............ M-8
Measure Corr Undef ............. M-8
Meter Adxs . . . . . . . . . . . . . . . . . . M-9
Meter On/Off AM . . . . . . . . . . . . . . . M-9
Meter On/Off FM . . . . . . . . . . . . . . . M-10
@ ..................... M-10
ModOut On/Off API .............. M-11
ModOut On/Off FM .............. M-12
Modulation . . . . . . . . . . . . . . . . . . M-12
Amplitude Modulation . . . . . . . . . . . . . M-14
FMModulation . . . . . . . . . . . . . . . . M-17
Pulse Modulation . . . . . . . . . . . . . . . . M-19
Module Menu . . . . . . . . . . . . . . . . . M-23
Module Select AUTO ............. M-24
Module Select Front . . . . . . . . . . . . . M-24
Module Select None ............. M-25
Module Select Rear ............. M-26
Monitor Menu . . . . . . . . . . . . . . . . . M-26
morenfm.. . . . . . . . . . . . . . . . . . M-27
Mtr Meas Menu . . . . . . . . . . . . . . . . M-28
P.
Peak RF Always . . . . . . . . . . . . . . . .
P P-l
PeakRFOnce . . . . . . . . . . . . . . . . .
P P-2
(POWER LEVEL ) . . . . . . . . . . . . . . . . . P-2
POWER(E) . . . . . . . . . . . . . .
. . . P-5
Pawer Offset . . . . . . . . . . . . . . . . .
P P-6
Power Slope . . . . . . . . . . . . . . . . .
P P-6
Power Sweep . . . . . . . . . . . . . . . . . P-7
;w)
(PRESET)....- .. . . . . . . . . . . . ......... .
. . . . . . . . . . . . . . . P-8
Preset Mode Factory . . . . . ...... . . . . .
Preset Mode Factory . . . . .... . P-9
Preset Mode User . . . . . . . ....... . . . .
.. . . . ... P-10
Contents-8 HP 8360
User's Handbook
Printer Adxs . . . . . . . . . . . . . . . . . P-10
(PRIOR) . . . . . . . . . . . . ........ P-11
Programming Language Analyzr ........ P-12
Programming Language CIIL . . ........ P-12
Programming Language SCPI . . ........ P-13
Pt Trig Menu . . . . . . . . . ........ P-14
Pulse Delay Normal . . . . . ........ P-14
Pulse Delay Txig'd . . . . . ........ P-15
Pulse Menu . . . . . . . . . . ........ P-16
Pulse Menu . . . . . . . . . . ........ P-16
Pulse OnfOffExtrnl . . . . . ........ P-18
Pulse On/OffIntxnl . . . . . ........ P-18
Pulse OnfOffScalax . . . . . ........ P-19
Pulse Period . . . . . . . . . ........ P-20
Pulse Rate . . . . . . . . . . ........ P-20
Pulse Rise TimeAuto . . . . . ........ P-21
Pulse Rise TimeFast . . . . . ........ P-21
Pulse Rise TimeSlow . . . . . ........ P-22
Pulse Width . . . . . . . . . ........ P-22
PwrMtr Range . . . . . . . . . . . . . . . . P-23
R.
(RECALL)
..................... R-l
Ref Osc Menu . . . . . . . . . . . . . . . . . R-l
(-ON/OFF) . . . . . . . . . . . . . . .
. . . . R-2
ROTARY KNOB . . . . . . . . . . . . . . . . R-2
S.
LSAVE) . . . . . . . . . . . . . . . . . . . . . S-l
SaveLock . . . . . . . . . . . . . . . . . . s-2
Save User Preset .............. s-2
SCPI Conformance Information . . . . . . . . . s-3
SCPI COMMAND SUMMARY s-14
SCPI STATUS REGISTER STRU&iRi ' : : : : S-56
Security Menu . . . . . . . . . . . . . . . . S-58
Selftest (Full) . . . . . . . . . . . . . . . s-59
SetAtten . . . . . . . . . . . . . . . . . . s-59
(SINGLE) . . . . . . . . . . . . . . . . . .
. . . S-60
SoftwareRev . . . . . . . . . . . . . . . . . S-60
.......... S-61
.......... S-61
.......... S-62
.......... S-63
.......... S-63
HP 8360 Contents-9
User's Handbook
. . . . . . . . . . . S-64
........... S-64
........... S-66
. . . . . . . . . . . S-67
S-67
. . . . . . . . . . . S-68
S-69
. . . . . . . . . . . s-70
. . . . . . . . . . . s-70
........... s-71
........... s-71
........... S-72
........... s-73
........... s-73
. . . . . . . . . . . s-74
s-75
........... s-75
........... S-76
........... S-76
........... s-77
T.
10 MHz Freq Std Auto . . . . . . . . . . . . T-l
10 MHz Freq Std Exts-nl ........... T-l
10 MHz Freq Std Intrnl . . . . . . . . . . . T-2
10 MHz Freq Std None . . . . . . . . . . . . T-2
Tracking Menu . . . . . . . . . . . . . . . . T-3
TrigOut Delay . . . . . . . . . . . . . . . . T-3
U.
Uncoupl Atten . . . . . . . . . . . . . . . . U-l
Unlock Info . . . . . . . . . . . . . . . . . U-l
Up/Down Power . . . . . . . . . . . . . . . . u-2
Up]Dn Size CW . . . . . . . . . . . . . . . . u-2
Up/Dn Size Swept .............. u-3
[UsER).. . . . . . . . . . . . . . .
. . . . u-4
USER DEFINED [MENU). . . . . . . . . . .
. . u-4
UsrKey Clear . . . . . . . . . . . . . . . . . u-5
UsrMenu Clear . . . . . . . . . . . . . . . . u-5
Contents-l 0 HP 8360
User's Handbook
Z.
ZeroFreq .................. Z-1
Wavef ofllt Nenu . . . . . . . . . . . . . . . . Z-1
Zoom . . . . . . . . . . . . . . . . . . . . . z-2
2a. ERROR MESSAGES
Introduction . . . . . . . . . . . . . . . . . . 2a-1
Front Panel Error Messages in Alphabetical Order . 2a- 1
SCPI Error Messages in Numerical Order . . . . . 2a-5
Synthesizer Specific SCPI Error Messages . . . . 2a-5
Universal SCPI Error Messages . . . . . . . . 2a-6
Error Messages From -499 To -400 . . . . . 2a-6
Error Messages From -399 To -300 . . . . . 2a-6
Error Messages From -299 To -200 . . . . . 2a-6
Error Messages From -199 to -100 . . . . . . 2a-7
2b. M e n u M a p s
AX Menu . . . . . . . . . . . . . . . . . . 2b-2
Frequency Menu . . . . . . . . . . . . . . . . 2b-4
Marker Menu . . . . . . . . . . . . . . . . . 2b-6
Modulation Menu . . . . . . . . . . . . . . . 2b-8
Power Menu . . . . . . . . . . . . . . . . . . 2b-10
Service Menu . . . . . . . . . . . . . . . . . 2b-12
Sweep Menu . . . . . . . . . . . . . . . . . . 2b-14
System Menu . . . . . . . . . . . . . . . . . 2b-16
User Cal Menu . . . . . . . . . . . . . . . . . 2b-18
2c. Specifications
Frequency . . . . . . . . . . . . . . . . . . . 2c-2
Range . . . . . . . . . . . . . . . . . . . . 2c-2
Resolution . . . . . . . . . . . . . . . . . . 2c-2
Frequency Bands (for CW signals) . . . . . . . 2c-2
Frequency Modes: . . . . . . . . . . . . . . 2c-2
CW and Manual Sweep . . . . . . . . . . . . 2c-2
Synthesized Step Sweep . . . . . . . . . . . . 2c-3
Synthesized List Mode . . . . . . . . . . . . 2c-3
Ramp Sweep Mode . . . . . . . . . . . . . . 2c-3
Internal 10 MHz Time Base . . . . . . . . . . 2c-3
RF Output . . . . . . . . . . . . . . . . . . 2c-4
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo