Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent HP 8673M_cal

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download HP 8673M_cal documenatation <<

Text preview - extract from the document

                                *TB 9-6625-2155-35
                                                  SUPERSEDED COPY DATED 1 MAY 1989
        DEPARTMENT OF THE ARMY TECHNICAL BULLETIN
         CALIBRATION PROCEDURE FOR
          SIGNAL GENERATOR SG-1219/U
       (HEWLETT-PACKARD, MODEL 8673M)
                       Headquarters, Department of the Army, Washington, DC
                                         6 December 2000
                        Approved for public release; distribution is unlimited.
                                  REPORTING OF ERRORS
         You can help improve this publication by calling attention to errors and by
         recommending improvements and stating your reasons for the recommendations.
         Your letter or DA Form 2028, Recommended Changes to Publications, should be
         mailed directly to Commander, U.S. Army Aviation and Missile Command,
         ATTN: AMSAM-MMC-LS-LP, Redstone Arsenal, AL 35898-5230. A reply will be
         furnished to you. You may also send in your comments electronically to our e-
         mail address: [email protected] or by FAX (256) 842-6546/DSN 788-6546.
                                                                                                      Paragraph   Page
   SECTION               I.     IDENTIFICATION AND DESCRIPTION
                                Test instrument identification ...........................                1        2
                                Forms, records, and reports ...............................               2        2
                                Calibration description ......................................            3        2
                        II.     EQUIPMENT REQUIREMENTS
                                Equipment required ...........................................            4        3
                                Accessories required ..........................................           5        3
                        III.    CALIBRATION PROCESS
                                Preliminary instructions ....................................             6        4
                                Equipment Setup ...............................................           7        5
                                Display resolution and accuracy .........................                 8        6
                                Single sideband phase noise ...............................               9        9
                                Harmonics, subharmonics, multiples
                                   and nonharmonic spurious signals ................                     10        10
                                RF output level ...................................................      11        12
                                Pulse modulation ................................................        12        18
                                Amplitude modulation ........................................            13        22
                                Frequency modulation ........................................            14        26
                                Power supply.......................................................      15        30
                                Final procedure...................................................       16        32




__________
   *This bulletin supersedes TB 9-6625-2155-35, dated 1 May 1989, including all changes.
TB 9-6625-2155-35

                                        SECTION I
                             IDENTIFICATION AND DESCRIPTION

1. Test Instrument Identification.          This bulletin provides instructions for the
calibration of Signal Generator, SG-1219/U (Hewlett-Packard, Model 8673M).            The
manufacturer's manual and TM 9-6625-3143-40 were used as the prime data sources in
compiling these instructions. The equipment being calibrated will be referred to as the TI
(test instrument) throughout this bulletin.

    a. Model Variations. None.

   b. Time and Technique. The time required for this calibration is approximately 8
hours, using the dc and low frequency and microwave techniques.

2. Forms, Records, and Reports

   a. Forms, records, and reports required for calibration personnel at all levels are
prescribed by TB 750-25.

   b. Adjustments to be reported are designated (R) at the end of the sentence in which
they appear. When adjustments are in tables, the (R) follows the designated adjustment.
Report only those adjustments made and designated with (R).

3. Calibration Description. TI parameters and performance specifications which
pertain to this calibration are listed in table 1.

                                   Table 1. Calibration Description
                Test instrument parameters                         Performance specifications
        Display accuracy and                          Display: 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo