Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent On-Wafer SOLT Calibration Using 4-port PNA-L Network Analyzers - Application Note 5989-2287EN c20140902 [17]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download On-Wafer SOLT Calibration Using 4-port PNA-L Network Analyzers - Application Note 5989-2287EN c20140902 [17] documenatation <<

Text preview - extract from the document

Keysight Technologies
On-Wafer SOLT Calibration Using
4-port PNA-L Network Analyzers
(N5230A Options x4x)



                       Application Note
Introduction

     This application note is intended for on-wafer applications using the 4-port,
     PNA-L network analyzers with two dual probes to achieve full 4-port on-wafer
     calibrations manually. 4-port PNA-L network analyzers are available in 13.5 or
     20 GHz models. PNA-L firmware revision must be 6.03 or higher.

     This documentation provides step-by-step instructions needed to set up a
     calibration kit before a 4-port SOLT (Short-Open-Load-Thru) calibration can
     be performed. The steps outlined here can be applied toward nearly any kind
     of non-coaxial application, of which on-wafer is one.
Equipment used:

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo