Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2]


>> Download M9393_SoftwareReleaseNotes M9393A Software Release Notes c20141025 [2] documenatation <<

Text preview - extract from the document
                                                                     Software
                                                                     Release Notes




  Keysight
  M9393A PXIe Vector Signal
  Analyzer




Notice: This document contains references to Agilent. Please note that Agilent's Test and
Measurement business has become Keysight Technologies. For more information, go to
www.keysight.com.
Keysight M9393A Version 1.0.80.1, August 2014

Documentation Defects Fixed
     Defect          Description
     320892          RF Attenuation Change is not proportional to Mixer Level Offset change
     338088          Document how to do calibration with 89600 and M9393 hardware
     338101          Alert user that no signal should be present on the M9393A during calibration


Software Defects fixed
     Defect          Description
     335782          Alignments fail if conversion mode is not set to Auto
     337060          Alignments fail if multiple instances of M9393 in the same process
     338698          Corrected trigger qualification of wideband burst trigger for IVI and 89600
     332857          89600: Reconnecting to M9393 from 89600 fails in certain sequences
     335725          89600: Large span to RBW ratios may generate errors
     331064          89600: Certain triggered measurements stall if trigger not received in 1 sec
     332469          89600: Incorrect power reading at certain settings when using average detector
     336180          89600: Corrected handling of trigger delay limits
     339074          89600: Minimum span can be less than 800 Hz
     337258          89600: Overlap Percentage error with Gate Trigger and Power Spectrum
     339305          Trigger Delay and Holdoff is incorrect or causes errors when used with 89600




Software Release Notes (part number: M9393-90008), page 2 of 2



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo