Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent N1913_14A_EPM_Series_Firmware_Revision_history N1913A N1914A EPM Series Firmware Revision History
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.
>> Download N1913_14A_EPM_Series_Firmware_Revision_history N1913A N1914A EPM Series Firmware Revision History documenatation <<Text preview - extract from the documentN1913A and N1914A EPM Series Power Meters Firmware Revision History
-------------------------------------------------------------------
Pls refer to "www.agilent.com/find/epm for more details.
Release A.01.09 (10 September 2013)
-------------------------------
- Resolved the issue of N191xA occasionally does not reply to the TCP socket connection requests from the customer's controller.
- Enable TCP keep alive value configuration through web browser
- Support USB-LAN adaptor for USB sensor connection
- Resolved the issue of meter unable to accept new connection after many LAN restart
- Resolved the issue of E9300H/ 1H having high offset after 1mW ref cal.
Release A.01.08 (20 March 2013)
-------------------------------
- Provide compatibility with U848xA series USB Thermocouple Sensor firmware A.01.01 only
- Resolved DISP:ENAB 0 bug
- Resolved erroneous error message displayed when self test with the 8481D/8485D/8487D
- Resolved minor display issues in Save/Recall menu
Release A.01.07 (22 Feb 2013)
-----------------------------
- Fixed timeout error for SERV:OPT? command
- Allow user to set frequency to 0Hz
- Bug fix on FETCH:DIFF? command
- Bug fix on 436/ 7/ 8 emulation codes
- Fixed CW self-test issue
Release A.01.06 (02 Jan 2012)
-----------------------------
- 200ft cable supportability
- Bug fix on *DDT? command returning unknown content on visa socket connection
- Inclusion of SERV:OPT? command
- Bug fix on unwanted frequency change when working with U2000 sensors.
- Bug fix on SYST:LANG SCPI command
- Bug fix on synchronization of Cal Factor value on GUI during remote operation.
Release A.01.05 (30 Sept 2011)
------------------------------
- Bug fixes on compatibility with USB sensors
- Bug fix on 436/7/8 emulation codes (option 200)
- Message queue size increased
Release A1.01.04 (30-May-2011)
---------------------------------
Display measurement data on power meter once the USB power sensor is connected at power ON.
Release A.01.03 (23 August 2010)
--------------------------
- Enable N848x (CFT option) for 436/7/8 emulation codes (option 200)
- Enable accepting commands with/without newline for 436/7/8 emulation codes (option 200)
- Bug fix on 436/7/8 emulation codes (option 200)
Release A.01.02 (10 March 2010)
--------------------------
-Upgrade communication board flash codes
Release A.01.01 (1-Jan-2010)
-----------------------------
- Enabled recorder output auto-scaling feature
- Bugs fix on 436/7/8 emulation codes (option 200)
Release A.01.00 (9-June-2009)
-----------------------------
Initial release.
◦ Jabse Service Manual Search 2025 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo