Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent N2830A Series InfiniiMax III+ Probes Configuration Card N2830-92000 c20140623 [2]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![N2830A Series InfiniiMax III+ Probes Configuration Card N2830-92000 c20140623 [2]](/pics/5c4d6f232c5ce.gif)
>> Download N2830A Series InfiniiMax III+ Probes Configuration Card N2830-92000 c20140623 [2] documenatation <<
Text preview - extract from the document
Keysight N2830A-Series InfiniiMax III+ Probes Connecting the Probe to the In niium Scope
To Connect To Disconnect
Locate the User's Guide 1. With the lever in relaxed in position push the probe Move and hold the lever at R
onto the BNC. (Release) and pull the probe
Download the user's guide from the Read the user's guide in Keysight's Probe Resource Center from the BNC.
2. The lever moves towards the R (release) and returns
probe's product page on
www.keysight.com.
(PRC). The PRC is an application that runs on a PC, Mac, or
iOS device. Available at www.keysight.com/ nd/PRC.
to symbol.
3. Move the lever towards the symbol until snug.
CAUTION. Risk of Damage Due to Electrostatic Discharge (ESD)
This probe is a high-performance device that ESD can quickly and imperceptibly damage or destroy.
Always work at a static-safe workstation and wear a wrist strap when handling probe components.
Refer to the User's Guide. To connect the probe to the oscilloscope, follow these four steps:
If the DUT is not grounded Connect the probe Additional Accessories
1 to the oscilloscope via the 2 head to the DUT.
AC mains ground, connect The probe
the DUT ground to the oscillo- ampli er must not be N1022B for connecting the In niiMax III+ probing system to In niium 86100D DCA-X
scope ground. An example of a connected to the sampling oscilloscope or other RF instruments.
oating ground is a battery- oscilloscope or the probe head!
N2787A 3D probe positioner for holding the browser or probe ampli er.
powered DUT.
Strain relief putty (N5439-65201).
Connect the
3 probe ampli er N5450B Extreme Temp. Extension Cable. See user's guide for more information.
1
1
2
to the oscillo- E2655C or N5443A PV Fixture. Required to calibrate, deskew, and verify the
2
3
scope. Do not connect performance of the probe. Properly positions the probe for performance veri cation
3
4
the probe head to the testing.
4
Probe Comp
ampli er at this time.
Probe Ampli er In niiMax III+ Probe Compatibility
4 Connect the
probe head to Probe Head
the probe ampli er. Compatible Oscilloscopes Not Compatible
When probing, you can 90000 X/Q Series (with N5442A adapter) 9000 and In niiVision scopes
move the probing site without
breaking the head-to-ampli er 90000A Series N2830/1/2A In niiMax III+ probes are
connection. EXCEPTION: break the not compatible with In niiMax I and
S Series
connection before moving an II probe heads and vice versa.
86100C/D Series (with N1022A/B
N2836A or N5441A solder-in probe
adapter)
head.
Recommended Probe Configurations See user's guide for detailed information. 3 N5439A ZIF Probe Head 4 N5444A 2.92 mm/3.5 mm
SMA Head
1 N5445A Differential Browser 2 N2848A QuickTip Probe Head
N5439A ii M o
fi n
de
In
ii M o
fi n
N2848A
de
In
Co
d
m
ea
p ati le H
ZIF tips b
Co
d
m
ea
p ati le H N2838A N5440A
b
BW up to 28 GHz
Connect two 2.92 mm, 3.5 mm, SMA
N2849A cables to make a di erential measure-
ment on a single oscilloscope channel.
Accessory: N5448A 2.92 mm exible
cables (25 cm) to extend the cable
In niiMode. Di erential, common mode, length.
BW up to 30 GHz single-ended measurements without
changing connections.
Replacement tips, ground blades and
ground screws available BW: 16 GHz Di , 10 GHz CM, 10 GHz SE 5 N2836A InfiniiMode
N2838A: 25 GHz BW, normal sensitivity Solder-In Probe Head
Easy, secure magnetic connection between
Best handheld probe for di erential and N5440A: 28 GHz BW, normal sensitivity
head and tip.
single-ended signals
N5447A: not compatible with In niiMax III+ ii M o
Extreme temperature environments. fi n
Spring-loaded tips and variable spacing
de
ampli ers
In
(0.5 mm to 3.1 mm, use thumbwheel to Accessory: 4 QuickTips (N2849A)
adjust) 5 PC Board ZIF tips (N2838A)
Co
d
m
ea
p ati le H
5 Ceramic ZIF tips (N5440A) b
Accessory: 4 replacement tips (N5476A)
Accessory: 4 replacement ground blades
6 N5441A Solder-In Probe Head Economical replaceable tip form factor
(N5445-68700) Choice of 450 (normal sensitivity) or
200 ZIF tips (high sensitivity)
Accessory: 4 replacement ground screws In niiMode. Di erential, common
(N5445-68701) Variable spacing mode, single-ended measurements
without changing connections.
Using the N2787A 3D probe positioner N2838A replacement axial resistors:
with the N5445A browser probe head BW up to 16 GHz, variable span N2836-68701 BW up to 26 GHz, variable span
reduces the chance of browser tips Economical, semi-permanent connection Economical, semi-permanent
breakage and ensures that the tips Extra wire accessory: 7 mil (01169-81301), connection
Keysight Technologies (N2830-92000) April 2014, Edition 2
maintain solid contact. 5 mil (01169-21306 ). Replacement axial resistors:
*N2830-92000* N2836-68701
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo