Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent No Programming Required_ Digitizing Signals and Analyzing Data with a DMM - Application Note 5991-2284EN c20140725 [6]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download No Programming Required_ Digitizing Signals and Analyzing Data with a DMM - Application Note 5991-2284EN c20140725 [6] documenatation <<

Text preview - extract from the document

Keysight Technologies
No Programming Required:
Digitizing Signals and
Analyzing Data with a DMM



        Application Note
Introduction

     Keysight Technologies, Inc. digital multimeters are ubiquitous on work benches and in automated
     test systems. You have most likely used one at some point in time. They measure basic electrical
     properties and give you a clear reading. More sophisticated DMMs have higher precision, data
     logging capability, and higher measurement speeds. If your DMM has these capabilities, you can
     use it to digitize your signals. Digitizing is useful to understand your signal better, and you can plot
     the data for a visual representation of your signal. Digitizing with your DMM has been simpliied with
     the Keysight DMM Connectivity Utility.

     This measurement brief explains how the new Keysight DMM app can help you digitize your signals
     and understand your data faster. In a couple of clicks, it can graph your measurements. The app also
     synchronizes multiple DMMs and allows you to put together a multichannel DMM system.


     Snapshot
     A mechanical engineering student was designing an airplane wing for his luid dynamics class. In order
     to evaluate the lex of the wing under different conditions, he needed to be able to measure forces on
     the wing in at least four different locations. He had some force transducers that change resistance
     depending on strain, these sensors were as old as he is. Since he is an undergrad, he did not have
     access to the really expensive equipment that the Graduate students use. He realized that he had
     access to the electronics' lab equipment to borrow a few DMMs. The student downloaded the Keysight
     DMM Connectivity Utility and used the app to setup his measurement. He was going to take lot of
     discrete data points then put the data together in Excel later. But he found out that he can use this
     app to digitize all four points and graph the data right away. In an afternoon, he's able to digitize the
     tranducer outputs in parallel and sweep through all of the test conditions. He then spent the rest of the
     weekend "studying".
03 | Keysight | No Programming Required: Digitizing Signals and Analyzing Data with a DMM 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo