Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent Source Monitor Unit (SMU) Fundamentals 3-SMU_Fundamentals c20130117 [1]
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Source Monitor Unit (SMU) Fundamentals 3-SMU_Fundamentals c20130117 [1] documenatation <<Text preview - extract from the documentExcerpt Edition
This PDF is an excerpt from Chapter 3
of the Parametric Measurement Handbook.
The
Parametric Measurement
Handbook
Third Edition
March 2012
Chapter 3: Source/Monitor Unit (SMU) Fundamentals
"You do not really understand something unless you can explain it to your
grandmother." -- Albert Einstein
SMU overview
Introduction
The primary measurement resource for parametric test is the source/monitor
unit or SMU. This is also sometimes also referred to as a source/measurement
unit, although the acronym ends up the same. The SMU can force voltage or
current and simultaneously measure voltage and/or current. The diagram below
shows a simplified SMU equivalent circuit:
A
V
Figure 3.1. Simplified SMU schematic.
Since SMUs must measure very low currents (1 fA or less), they always have
triaxial outputs for the reasons discussed in the previous chapter.
There are a variety of different types of SMUs. The most common SMU is the
medium-power SMU (MPSMU); as the name implies this SMU can supply
moderate levels of voltage and current (
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo