Service Manuals, User Guides, Schematic Diagrams or docs for : Agilent U3606A Firmware Revision History U3606A_Firmware_Revision_History

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.

>> Download U3606A Firmware Revision History U3606A_Firmware_Revision_History documenatation <<

Text preview - extract from the document

Agilent U3606A Firmware Revision History
----------------------------------------------

IOB - IO Board
MB  - Measurement Board
SB  - Source Board


Release 03.07(IOB)-04.07(MB)-03.02(SB) (9-Jan-2013):

- Improved GPIB timeout on looping test.
- Improved NI LabView driver issue.
- Corrected VOLT:ACDC:RANGE? MAX and MEAS? command
- Resolved GPIB Legacy issue.
- Resolved USB NI driver issue.
- Resolved the IOB firmware update issue on IOB version 2.00


Release 03.00(IOB)-04.00(MB)-03.00(SB) (14-Mar-2012):

- Resolved MEAS:VOLT? AUTO,MIN command issue
- Resolved GPIB timeout issue & CR+LF issue
- Resolved the IOB firmware update issue. (format new flash IC to 256 bytes per page)
  Improved from version 02.00(IOB)-03.00(MB)-03.00(SB) & 02.01(IOB)-03.00(MB)-03.00(SB)


Release 02.03(IOB)-03.01(MB)-03.00(SB) (9-Dec-2011):

- Resolved the IOB firmware update issue. (format new flash IC to 256 bytes per page)
- Resolved GPIB issue


Release 02.02(IOB)-03.01(MB)-03.00(SB) (18-Nov-2011):

- Resolved the IOB firmware update issue. (format flash IC to 256 bytes per page)
- Resolved CR issue on GPIB
- Resolved Utility save issue


Release 02.01(IOB)-03.00(MB)-03.00(SB) (9-Jun-2011):

- Resolved the IOB firmware update issue.


Release 02.00(IOB)-03.00(MB)-03.00(SB) (23-Mar-2011):

- To improve the CC mode Trip issue (involved hardware changes)
- To improve the CC stability issue on E-load CV & CR


Release 02.00(IOB)-02.00(MB)-02.01(SB) (18-Nov-2010):

- To clear the Error511 - "Current output over protection" in display 


Release 02.00(IOB)-02.00(MB)-02.00(SB) (20-May-2010):

- To add 20mV range in DMM.
- To add in Smooth Function in DMM.
- To add in Source Protection Mode with ON/OFF. 
- To add in the termination :\n detection. 


Release 01.00(IOB)-01.00(MB)-01.00(SB) (14-Oct-2009):

- To improve the Low Resistance measurement time. 
- To enhance the device clear execution.
- To enhance the queue up buffer for continuously sending write commands without read back.
- Resolved the wrong range returned while set to default range in duty cycle voltage measurement.
- Resolved the subsequence query commands timeout after the time consuming measurement if purposely shorten the timeout setting.


Release 00.18(IOB)-00.50(MB)-00.21(SB) (20-May-2009):

Initial release.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo