Service Manuals, User Guides, Schematic Diagrams or docs for : DENON DVD Video Player DVD Video Player Denon - DVD-A1UDCI Service Bulletin DZ09-191
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Service Bulletin DZ09-191 documenatation <<
Text preview - extract from the document
100 Corporate Drive Mahwah, NJ 07430
Service Bulletin
No. : DZ09-191
Date: October 19, 2009
_____________________________________________________________
Model: DVD-A1UDCI
Subject: The recovery method of the firmware via DPMS (D&M Product
Management Server).
Countermeasure is applicable only upon claim from the customer.
Symptom: The unit does not get the "IP address" properly. So, when
customer updates the unit via DPMS, the unit does not start updating. The unit
only indicates "SETUP" on the FL Display.
Solution: COUNTERMEASURE via DPMS
Note: Please do not use Proxy for updating in the Network environment! If
customer uses setting of Proxy, the unit doesn't update the firmware properly
Caution: It is necessary to initialize the unit before the update work begins. The
customer has to initialize their BD/DVD Player. Please update the firmware after
you confirm this matter to the customer beforehand.
Preparation of Recovery the firmware
1) Turn the Power Supply of the unit off.
2) Connect the Ethernet terminal of the unit to the Network line by Ethernet
straight cable. (Don't use Ethernet cross cable.)
3) The connection of the network recommends using an Ethernet cable (not
wireless) for a certain update.
4) Turn the Power Supply of the unit on.
5) Remove the Disc from the Tray.
6) Please confirm! "NO DISC" on the FL Display.
7) The unit sets the Internet. Waiting for about two minutes until customer's
router ends its set up.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Caution: The update doesn't succeed when the customer's set cannot connect to
the Internet correctly. In this case, please confirm the internet environment in the
customer's house. Whether the set is able to receive Internet radio correctly or
not can be used to determine whether the Internet is properly connected. There
are some problems under the internet environment when the Internet radio can
not be received.
8) Press "SETUP" button on the Remote control and indicates the GUI menu.
9) Press "CURSOR" button. The GUI indicates, "Network Setup" > "DHCP" >
"On".
10) Press the "ENTER" button.
11) Please wait about 10 seconds until the DHCP function turns on.
Caution: The update interrupts when it is not possible to connect it with the
Internet correctly. In this case, please redo again from step 1)
12) Select "Start" on GUI.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
13) Press the "ENTER" button.
14) The firmware will start updating.
Caution: when the firmware update starts correctly, the GUI and the audio
signal, etc. everything stops, and becomes the update operation.
15) When updating starts, the power indicator lights red.
16) The GUI display disappears, and becomes only FL display.
17) During update, a rough remaining time is indicated on the display. When
updating is complete the power indicator lights green and normal status is
resumed.
18) During the updating, the FL Display indicates the procedure of update the
firmware.
Time necessary for update: approximately 30 min.
Caution: The update time might change depending on the situation of the DPMS
server and the speed of the Internet environment of the customer's house.
19) The unit initializes automatically.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Confirmation of the version:
1) Press the "OPEN/CLOSE" button and open the Disc Tray.
2) Remove the Disc from the Tray.
3) Please confirm! "NO DISC" on the FL Display.
4) While pushing the "PLAY" and "OPEN/CLOSE" button, turn on the power of
unit.
5) Plug in AC CORD.
6) The indication of "PLAY" and "PAUSE" will be displayed on FL Display.
7) Please confirm! "NO DISC" on the FL Display, and wait 10 seconds.
8) Press the buttons on the remote control in the order of "3", "2", "6" and "5".
9) The version of the firmware will be indicated on the FL Display.
10) The firmware list will also be shown on connected TV (GUI).
11) Push the "UP" button of cursor button, version of the each firmware will be
indicated on the FL Display.
Cautions during the rewriting operation:
1) Please do not turn off the Power of the unit during the rewriting operation.
2) If the Display isn't turning into the following version of the firmware during the
rewriting operation, wait longer than 10 minutes after closing the Disc Tray.
Then, turn off the Power of the unit and start the rewriting operation from the
beginning again.
Troubleshooting: If the display reads as shown below, check the settings and
network environment, then update again. The problem is not in the Internet
connection if the Internet radio can be able to be received correctly
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
______________________________________________________________________________________
CONFIDENTIALITY NOTICE:
The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their
employees. This document may contain information that is privileged, confidential and may be protected from disclosure under
applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this
document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss
resulting from the misuse of the information contained in this document.
Cautions during the updating operation:
1) Please do not turn off the setting of "DHCP" when you update the unit.
(Initialization is turning on.) Please execute it under the guidance of the IT staff
with computer skills when the setting of "DHCP" is unavoidably turned off by
limiting the electronic environment, and you set IP Address, the subnet mask, the
default gateway, and DNS, etc. for myself. When it makes a mistake in the
setting with "DHCP" turned off, the unit might not operate, and the unit be
damaged in the worst situation. Please do not touch the setting of "DHCP"
except in special circumstances.
2) When the customer use "Netgear router 614 Series" for updating, "uPnP"
have to deactivate in the router.
3) Do not turn off the Power of the unit during the updating operation.
4) If the Display has kept indicating fixed during the updating operation, wait
longer than total updating time. Then, turn off the Power of the unit and start the
updating operation from the beginning again.
5) The unit doesn't break down while updating it when the power supply of the
unit is turned off or the cable of the Internet is pulled out.
6) Please execute initialization when it is not improved. Still, please repair by
service when it is not improved.
7)Even◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo