Service Manuals, User Guides, Schematic Diagrams or docs for : Fujitsu Fujitsu MPG Recovery Tool Manual
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Fujitsu MPG Recovery Tool Manual documenatation <<
Text preview - extract from the document
February 7, 2002
============================================================================
Fujitsu MPG series HDD Recovery Tool Manual
Version 2.02A
Copyright (c) 2002 Fujitsu Limited. All Right Reserved.
============================================================================
This document explains the recovery method and usage of the Recovery Tool for FUJITSU MPG
Series Hard Disk Drives.
Purpose of this Recovery Tool
The purpose of this tool is to recover customer's critical data from failing Fujitsu MPG series HDD if
requested by the customer. However, the data of the failure drives may NOT be 100% recovered.
For limitations of this Recovery Tool, please see the Section 3 of this document.
After data recovery, the drive must be replaced with a good drive. Please do not use the recovered
drive even if the drive works fine because the drive is fixed temporally for data recovery.
Licensing agreement conditions
Before use this Recovery Tool you must agree the following licensing agreement conditions.
If you do not agree to the terms of this agreement, you are not authorized to use this Recovery Tool
in any way.
1) This tool does not recover 100% due to the drive failure condition.
2) Do not change or delete the copyright displays included in this tool.
3) Do not change any contents included in this tool.
4) Do not use any contents included in this tool for sales purpose.
5) Do not distribute this tool without the permission of Fujitsu Ltd.
6) Do not assume any liability based on this tool.
7) Use this tool under the specified condition.
8) Use this tool for exclusive purpose of recovering data from Fujitsu MPG series Hard disk drives.
9) Use of this tool is prohibited without the above-mentioned agreements << items 1) - 8) >>
-------------------------------------------------------------------------------------------------------------------------------------
Table of contents
1. Introduction
2. System configuration required
3. Drive condition to be recovered by this tool
4. Create the Recovery Tool on floppy disk
5. Run the Recovery Tool
6. Method of Using Copy Tool
7. Notification
8. Revision History
1/11
Fujitsu Proprietary & Confidential
1. Introduction
This Recovery Tool is workable for all Fujitsu MPG series HDD drives.
FUJITSU MPG3204AH-E/MPG3409AH-E/MPG3307AH-E
FUJITSU MPG3102AH/MPG3153AH/MPG3204AH
FUJITSU MPG3102AT/MPG3204AT/MPG3307AT/MPG3409AT
2. System configuration required
- Microsoft (R) MS-DOS(R) 5.0 or later system with Monitor and Key board
- First Boot Device is Floppy drive
- When you make the Recovery Tool floppy disk, the following system configuration is required.
Microsoft(R) Windows(R) 95 or Microsoft(R) Windows(R) 98
Microsoft(R) Windows(R) Me
Microsoft(R) Windows NT(R)
Microsoft(R) Windows(R) 2000
3. Drive condition to be recovered by this tool
This Recovery Tool shall only be used in the following drive condition:
The hard disk drive is not recognized by the system but the motor is spinning.
Other abnormal conditions such as abnormal acoustics noise cannot be recovered and shall not be
attempted by this Recovery Tool.
4. Create the Recovery Tool on floppy disk
First of all, the Recovery Tool file must be created from the attached "RecoverToolV202A.exe".
In the normal DOS PC environment according to the following procedure.
4-1. Prepare a formatted blank 1.44MB floppy disk.
4-2. Copy the software "RecoverToolV202A.exe". in the local Hard Disk drive first.
4-3. Click this software from Windows Explore.
4-4. "Fujitsu MPG Series Recovery Tool" massage will be shown on the monitor. Insert the blank
floppy disk into the floppy drive and click the ">>NEXT" button.
4-5. After "Now making a Recovery Tool floppy ..." message is shown on the monitor, wait for few
minutes.
4-6. "Recovery Tool floppy was created. Please remove a floppy disk" message will be shown on
the monitor, please click "OK" button to close. Then take out the floppy disk.
5. Run the Recovery Tool
5-1. At the first, please turn off the PC system, then connect the recovery drive to the Master of
the Primary port of the system.
(Note) The jumper setting must be Master drive, please confirm the jumper setting.
In some specific PC system, the power is still supplied to the motherboard even if turn
off the system power. In case of this, please disconnect the AC power cable from the
system for more than 3 seconds. Reconnect the power and proceed to the recovery
process.
5-2. The Recovery Tool floppy disk inserts to the boot floppy drive, then turn the PC system
power on.
2/11
Fujitsu Proprietary & Confidential
5-3. Next step, the following message will be shown on the monitor and the tool is downloaded
from floppy disk.
Now Loading ...
Please wait a few minutes.
Fig. 1
5-4. A few minutes later, the following License Agreement message will be shown on the monitor,
please read to the following License Agreement, press the "" or Page Down" key to see the
rest of the agreement.
*** FUJITSU MPG Series Recovery Tool ***
END USER SOFTWARE LICENSE AGREEMENT
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Fig. 2
Do you accept all of the terms of the preceding License Agreement? If you NO, please click
the "DISAGREE", the tool will stop. Then turn the PC system power off.
To run you must accept the agreement, please click the "AGREE" to start the tool.
3/11
Fujitsu Proprietary & Confidential
5-5. The recovery process is started, the following message will be shown on the monitor.
Please wait and do NOT turn off of the system until recovery has been completed.
*** FUJITSU MPG Series Recovery Tool ***
YOUR FUJITSU MPGXXX is now being recovered.
** DO NOT SHUTDOWN YOUR PC UNTIL RECOVERY HAS BEEN COMPLETED **
Fig. 3
5-6. If recovery is not necessary, the following message will be shown on the monitor. Please turn
the PC system power off.
*** FUJITSU MPG Series Recovery Tool ***
< FUJITSU MPGxxx > ---- Primary ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo