Service Manuals, User Guides, Schematic Diagrams or docs for : Fluke 5700a 5730____1beng0200
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 5730____1beng0200 documenatation <<Text preview - extract from the document Certificate of Compliance
Certificate: 2118607 (LR 44340C) Master Contract: 162029
Project: 2668223 Date Issued: October 18, 2013
Issued to: Fluke Corporation
6920 Seaway Blvd
Everett, WA 98203
USA
Attention: Joe Swanzy
The products listed below are eligible to bear the CSA
Mark shown with adjacent indicators 'C' and 'US' for
Canada and US or with adjacent indicator 'US' for
US only or without either indicator for Canada only.
Paul Tanaka
Issued by: Paul Tanaka, AScT.
PRODUCTS
CLASS 8721 06 - LABORATORY EQUIPMENT - Electrical
CLASS 8721 86 - ELECTRICAL EQUIPMENT FOR LABORATORY USE - Certified to US
Standards
Calibrators, Models 5700A and 5720A: cord connected, rated 100, 110, 115, 120, 200, 220, 230, 240 V, 47-63
Hz, 300 VA max.
Calibrator, Model 5730A; cord connected rated 100-120V, 220-240V, 47-63Hz, 300VA max.
Notes:
1. The above models are cord connected, Equipment Class I, Pollution Degree 2, Installation category II;
2. Mode of operation: Continuous;
3. Environmental Conditions: Extended/as specified by manufacturer;
DQD 507 Rev. 2012-05-22 Page: 1
Certificate: 2118607 (LR 44340C) Master Contract: 162029
Project: 2668223 Date Issued: October 18, 2013
APPLICABLE REQUIREMENTS
CSA Standards:
CAN/CSA-C22.2 No. 61010-1-12 - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use, Part 1: General Requirements
CAN/CSA-C22.2 No. 61010-2-030-12 - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
UL Standards:
UL Std. No. 61010-1 (3rd Edition) - Safety Requirements for Electrical Equipment for Measurement, Control,
and Laboratory Use - Part 1: General Requirements
UL Std. No. 61010-2-030 (1st Edition) - Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
Reference Standards:
EN 61010-1:2010 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory
Use - Part 1: General Requirements
EN 61010-2-030:2010 - Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 2-030: Particular requirements for testing and measuring circuits
CONDITIONS OF ACCEPTABILITY
(1) The main supply cord set provided with the equipment must be an approved type acceptable to the
authorities in the country where the equipment is sold.
(2) The user replaceable mains (line) fuse must be an approved type acceptable to the authorities where the
equipment is sold.
(3) If at any time there is a conflict between the system safety provisions and any relevant local (national or
regional) requirements, the local requirements always take precedence.
DQD 507 Rev. 2012-05-22 Page: 2
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo