Service Manuals, User Guides, Schematic Diagrams or docs for : Hitachi disk Hitachi Deskstar 160 GB

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Hitachi Deskstar 160 GB documenatation <<

Text preview - extract from the document

         Verkrijgbaar bij: Grafi-Call Computers BV. Leiden




Quick installation guide
Hitachi Deskstar T7K250
Ultra ATA/133 Hard disk drive

Models:
             HDS722525DLAT80
             HDS722516DLAT80




                                                            Quick installation procedure
System requirements for Ultra ATA/133
                                                             Note: Back up all data before installing drive!
If you do not have the components listed below, your
drive will function but at speeds lower than 133 MB/s.       1.   Turn off the computer.
                                                             2.   Unplug the computer
    40-pin, 80-conductor cable
                                                             3.   Remove the computer cover as instructed by the
    A controller card or motherboard chipset with Ultra           computer system manual.
    ATA/133 capability                                       4.   Discharge static electricity (see Handling pre-
                                                                  cautions).
    Ultra ATA/133 compatible BIOS or driver
                                                             5.   Note the mounting position of existing drives and
                                                                  cables. If you are replacing a drive or any cable,
                                                                  remove it now.
Handling precautions                                         6.   Remove the drive from the ESD bag.
                                                             7.   Record the model, the part number, and the serial
    Set the drive down gently to prevent damage from              number of the drive for future reference.
    impact or vibration.                                     8.   Insert the required jumpers. Refer to the jumper
    Do not open the ESD bag containing the drive until            block diagram below.
    needed.                                                       

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo