Service Manuals, User Guides, Schematic Diagrams or docs for : Hitachi disk Hitachi Deskstar 120GXP Quick Installation Guide v1.1

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Hitachi Deskstar 120GXP Quick Installation Guide v1.1 documenatation <<

Text preview - extract from the document

Quick installation guide
Hitachi Deskstar 120GXP
Ultra ATA/100 Hard disk drive

Models:      IC35L020AVVN07
             IC35L020AVVA07
             IC35L040AVVN07
             IC35L040AVVA07
             IC35L060AVVA07
             IC35L080AVVA07
             IC35L100AVVA07
             IC35L120AVVA07



System requirements for Ultra ATA/100                       Quick installation procedure
If you do not have the components listed below, your         Note: Back up all data before installing drive!
drive will function but at speeds lower than 100 MB/s.
                                                             1.   Turn off the computer.
    40-pin, 80-conductor cable                               2.   Remove the computer cover as instructed by the
                                                                  computer system manual.
    A controller card or motherboard chipset with Ultra
                                                             3.   Discharge static electricity (see Handling pre-
    ATA/100 capability
                                                                  cautions).
    Ultra ATA/100 compatible BIOS or driver                  4.   Unplug the computer.
                                                             5.   Note the mounting position of existing drives and
                                                                  cables. If you are replacing a drive or any cable,
Handling precautions                                              remove it now.
                                                             6.   Remove the drive from the ESD bag.
    Set the drive down gently to prevent damage from         7.   Record the model, the part number, and the serial
    impact or vibration.                                          number of the drive for future reference.
    Do not open the ESD bag containing the drive until       8.   Insert the required jumpers. Refer to the jumper
    needed.                                                       block diagram below.
    Handle the drive carefully by the edges. Do not               

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo