Service Manuals, User Guides, Schematic Diagrams or docs for : IBM Deskstar P7K500 Installation Guide

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Deskstar P7K500 Installation Guide documenatation <<

Text preview - extract from the document

Quick installation guide
Hitachi Deskstar P7K500
ATA 133 Hard disk drive

Models: HDP725050GLAT80
             HDP725040GLAT80
             HDP725032GLAT80
             HDP725025GLAT80
             HDP725050GLA380
             HDP725050GLA360
             HDP725040GLA380
             HDP725040GLA360
             HDP725032GLA380
             HDP725032GLA360
             HDP725025GLA380


System requirements for Ultra ATA/133                       Quick installation procedure
If you do not have the components listed below, your         Note: Back up all data before installing drive!
drive will function but at speeds lower than 133 MB/s.
                                                             1.   Turn off the computer.
    40-pin, 80-conductor cable                               2.   Unplug the computer
                                                             3.   Remove the computer cover as instructed by the
    A controller card or motherboard chipset with Ultra
                                                                  computer system manual.
    ATA/133 capability
                                                             4.   Discharge static electricity (see Handling pre-
    Ultra ATA/133 compatible BIOS or driver                       cautions).
                                                             5.   Note the mounting position of existing drives and
                                                                  cables. If you are replacing a drive or any cable,
Handling precautions                                              remove it now.
                                                             6.   Remove the drive from the ESD bag.
    Set the drive down gently to prevent damage from         7.   Record the model, the part number, and the serial
    impact or vibration.                                          number of the drive for future reference.
    Do not open the ESD bag containing the drive until       8.   Insert the required jumpers. Refer to the jumper
    needed.                                                       block diagram below.
    Handle the drive carefully by the edges. Do not               

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo