Service Manuals, User Guides, Schematic Diagrams or docs for : Icom IC2820H_serv

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
IC2820H_serv


>> Download IC2820H_serv documenatation <<

Text preview - extract from the document
DUAL BAND FM TRANSCEVER




S-14325XZ-C1
Mar. 2007
                    INTRODUCTION                                                         CAUTION
This service manual describes the latest service information      NEVER connect the transceiver to an AC outlet or to a DC
for the IC-2820H DUAL BAND FM TRANSCEVER at the                   power supply that uses more than 15 V. This will ruin the
time of publication.                                              transceiver.
     MODEL              VERSION                                   DO NOT expose the transceiver to rain, snow or any liquids.
                         USA-01
                         AUS-01                                   DO NOT reverse the polarities of the power supply when
    IC-2820H             KOR-01                                   connecting the transceiver.
                         TPE-01                                   DO NOT apply an RF signal of more than 20 dBm (100 mW)
                         EXP-01                                   to the antenna connector (J1). This could damage the
                                                                  transceiver's front end.




 To upgrade quality, any electrical or mechanical parts and
 internal circuits are subject to change without notice or
 obligation.




                   ORDERING PARTS                                                   REPAIR NOTES
Be sure to include the following four points when ordering        1. Make sure a problem is internal before disassembling
replacement parts:                                                   the transceiver.
                                                                  2. DO NOT open the transceiver until the transceiver is
1. 10-digit order numbers                                            disconnected from its power source.
2. Component part number and name                                 3. DO NOT force any of the variable components. Turn
3. Equipment model name and unit name                                them slowly and smoothly.
4. Quantity required                                              4. DO NOT short any circuits or electronic parts. An
                                                                     insulated tuning tool MUST be used for all adjustments.
                                                    5. DO NOT keep power ON for a long time when the
                                                                     transceiver is defective.
 1110003491 S.IC   TA31136FNG IC-2820H    MAIN UNIT   5 pieces
                                                                  6. DO NOT transmit power into a signal generator or a
 8820001210 Screw 2438 screw   IC-2820H   Top cover   10 pieces
                                                                     sweep generator.
Addresses are provided on the inside back cover for your          7. ALWAYS connect a 50 dB to 60 dB attenuator between
convenience.                                                         the transceiver and a Modulation Analyzer or spectrum
                                                                     analyzer when using such test equipment.
                                                                  8. READ the instructions of test equipment thoroughly
                                                                     before connecting equipment to the transceiver.


Icom, Icom Inc. and       logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other countries.
                                                             CONTENTS


SECTION   1     SPECIFICATIONS

SECTION   2     INSIDE VIEWS

SECTION   3     DISASSEMBLY INSTRUCTIONS

SECTION   4     CIRCUIT DESCRIPITON
          4-1    RECEIVER CIRCUITS ............................................................................................................... 4-1
          4-2    TRANSMITTER CIRCUITS ....................................................................................................... 4-4
          4-3    FREQUENCY SYNTHESIZER .................................................................................................. 4-6
          4-4    POWER SUPPLY CIRCUITS ..................................................................................................... 4-8
          4-5    PORT ALLOCATIONS ............................................................................................................... 4-9


SECTION   5     ADJUSTMENT PROCEDURES
          5-1    PREPARATION .......................................................................................................................... 5-1
          5-2    FREQUENCY ADJUSTMENT ................................................................................................... 5-2
          5-3    TRANSMIT ADJUSTMENT ....................................................................................................... 5-3
          5-4    RECEIVE ADJUSTMENT .......................................................................................................... 5-4


SECTION   6     PARTS LIST

SECTION   7     MECHANICAL PARTS

SECTION   8     BOARD LAYOUTS

SECTION   9     BLOCK DIAGRAM

SECTION   10 VOLTAGE DIAGRAM

SECTION   11 HM-133

SECTION   12 UT-123 (Optional product)
    SECTION 1   SPECIFICATIONS

M




M




M




                      1-1
    SECTION 2                    INSIDE VIEWS

               



◦ Jabse Service Manual Search 2023 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo