Service Manuals, User Guides, Schematic Diagrams or docs for : Kyocera Copiers KM1500 Service Bulletins 2DC-004

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 2DC-004 documenatation <<

Text preview - extract from the document

                                                                                                         1/1

                                             Service Bulletin
 SB Number: SB 2DC-004                        Creation Date: 11/09/2003
 Subject:   How to replenish toner when replacing Process Unit
 Model:              KM-1500

If during the initial set up of the machine, a brandnew PU and toner container are installed in the machine
and the power is turned on after that, a toner supply process, lasting about 900 sec., will start automatically.

Please be informed however that this process takes place only once, when setting up the machine, in order
to feed the toner into the PU and up to the developing roller.
When replacing a current PU with a new PU, this automatic toner supply process will not take place.
Therefore, when replacing the PU, toner needs to be replenished forcibly by following procedure.


Toner replenishing procedure
1.)    Turn the power on.
2.)    Open the front top cover (Operation Panel Indicator: `OP')
3.)    Press the `Stop/Clear', (+) and (-) keys at the same time and press them down for over 5 seconds.
4.)    Close the front top cover. (Operation Panel Indicator: `900')
5.)    The machine drives and the toner replenishment process will start. (Operation Panel Indicator: `8**')
=> A countdown will start and the toner will be replenished for a period of 900 seconds.


If for some reason it is necessary to quit the replenishing process (while toner is being replenished), please
follow the procedure below.


NOTE:
The replenishment process cannot be stopped by turning power off and on again, as this will not clear the
countdown timer.


Toner replenishing cancel procedure
1.)     Open the front top cover. (Operation Panel Indicator: `OP')
2.)     Press the `Stop/Clear', (+) and (-) keys at the same time and press them down for over 5 seconds.
3.)     Close the front top cover. (Operation Panel Indicator: `1')
4.)     The toner replenishment will stop and machine returns to normal operation.


Precaution
Do not execute the above operation unless the developing roller is completely empty, as in the case of
former PU replacement with a new PU!




                 KMIS Service Team, Kyocera Mita Europe                              6245 / SB 2DC-004

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo