Service Manuals, User Guides, Schematic Diagrams or docs for : Kyocera Printer FS-6970 ServiceBulletins SB-2J5-0013-B190

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download SB-2J5-0013-B190 documenatation <<

Text preview - extract from the document

                                                                                                                            (Page.1/1)

           Service Bulletin                                                             Ref. No.    2J5-0013 (B190)
                                                                                                    June 30, 2011
                 Firmware Upgrade (Engine: Ver.006.002)
  Subject
                 FS-6970DN_v4.00.0020_(2010-12-24)
  Model          FS-6970DN

Topic
The firmware was upgraded as follows.


Content of Changes

  No. Item                            Details                                                                       CTL.       FW

   1    Measure against the gray     The gray background might appear when refilling toner.                        566027     ENGINE

        background                   The margin for gray background was improved by regulating the
                                     amount of refilled toner when the toner is installed after [Replace
                                     toner] or [Low toner] was displayed.
  2     Measure against the          The SC6000 (Fuser heater error) might be mistakenly detected.                 566075     ENGINE

        misdetection of the          Therefore, the condition for detection was changed.
        SC6000 error (Fuser          The time below was changed from 5 sec. to 15 sec.:
        heater error)                




The following change has been implemented since this engine firmware. Please explain it to the users.

The toner container once showed  cannot be reused even if reinstalling it into the machine.
Please replace it with a new toner container.



                                        Check
                 Program No.                             Ver.        Status Date        Current Ver.       Remark
                                         SUM
 SYSTEM        2J5_3000004003            68fa          004.003        2010/12/24          003.009              -                 -

  ENGINE       2J5_1000006002           8B90           006.002         2011/6/8           005.001              -            New upgrade


For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade each kind of the firmware to the latest version at the same
time.




 KMC's Classification               Entire Stock Rework                 In-Field modification at next visit
                                    In-Field modification by case        No modification necessary
  Field Measure: Please upgrade the firmware if the phenomenon described above arises.
                 Also, please explain the users the content of  above.

  Serial Nos. of the Affected Machines: Planned from June 2011* production
                                *The above is the plan at the present moment. Please note that this information is subject to change.




                                              KYOCERA MITA Europe B.V.
                                     European Service & Development Center (ESDC)

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo