Service Manuals, User Guides, Schematic Diagrams or docs for : Kyocera Printer FS-6970 ServiceBulletins SB-2J5-0015-B366
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download SB-2J5-0015-B366 documenatation <<
Text preview - extract from the document
(Page.1/1)
Service Bulletin Ref. No. 2J5-0015 (B366)
November 14, 2011
Firmware Upgrade (Engine: ver.007.002)
Subject
FS-6970DN_05.00.0010_(2011-08-24)
Model FS-6970DN
Topic
The firmware was upgraded as follows.
Content of Changes
No. Item Details CTL No. FW
1 Measures against the The toner low detection was changed according to the residual amount 575683 ENGINE
erroneous display of since "Toner low" might be displayed right after toner container was
"Toner low" message installed.
(Indication of "Toner low" message is based on the count where the
toner low is regularly detected. However, if the amount of residual toner
inside the toner container is high, the count to show this message will be
increased in order to stabilize the toner low detection.)
The message "Replace toner" may appear if toner inside the developer unit is clustered on one side because of
move of the machine or due to detachment/attachment of the developer unit for jam clearance even after the
engine firmware was upgraded. In this case, however, the message can be cleared by closing the top cover after
once opening it or turning the power OFF and ON.
Check Current
Program No. Ver. Status Date Remark
SUM Ver.
SYSTEM 2J5_3000005005 4c40 005.005 2011/8/24 - -
ENGINE 2J5_1000007002 0b5f 007.002 2011/10/6 006.002 - New upgrade
For the KM sales companies, it is possible to download the firmware at the download center on the ESDC.net.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please upgrade the firmware when the problem described above arises.
Also, please explain your users the content of above.
Serial Nos. of the Affected Machines: Planned from the October 2011* production
*The above is the plan at the present moment. Please note that this information is subject to change.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo