Service Manuals, User Guides, Schematic Diagrams or docs for : Kyocera Printer _OPTIONS DF-600 SERVICEBULLETIN AS-138

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download AS-138 documenatation <<

Text preview - extract from the document

                                                                                                              1/3
                                                          Service Bulletin
 SB Number: SB AS-138                                                              Creation Date: 25/02/2005
 Subject:   Change of sub ejection section
 Model:                DF-600, DF-610
DF-600:           finisher for KM-4530, FS-C8026N, KM-C2630/C2630D
DF-610:           finisher for KM-4530/5530/6330/7530, FS-C8026N,KM-C2630/C2630D

Please be informed that the following changes have been implemented to the DF-600/610 sub ejection section.

Field Action
When replacing any of the involved parts in this modification, please mind to use the old parts for former finisher
(before affected serial number on page 3) and the new parts for the modified finisher (after affected serial number
on page 3).

CONTENTS OF CHANGES

1)        Improving the efficiency of assembly work

a. The fixation method of the `RIGHT GUIDE SUB CONVEYING' to the `MOUNT, CONVEYING GUIDE' has been
changed from 3 pieces of `BINDING SCREW BVM4X6 (BLACK)' to 1 piece.

b. The fixation method of `UPPER GUIDE, SUB CONVEYING' to the `MOUNT, CONVEYING GUIDE' has been
changed from 4 pieces of `BINDING SCREW BVM4X6 (BLACK)' to 2 pieces.

c. Hook parts have been added and holes have been created to the `RIGHT GUIDE SUB CONVEYING', `UPPER
GUIDE, SUB CONVEYING' and `MOUNT, CONVEYING GUIDE'.

2)        Reduction of deterioration of the shaft for `PULLEY EXIT'

d. So far, for fixation, the `PULLEY EXIT' was fitted into the `PLATE SPRING, SUB EJECT'. The fixation method
has been changed so that the `PULLEY EXIT' is put through the `SHAFT SUB EJECT PULLEY'.

3)        Protecting the wires

e. In order to protect the wires of `SOLENOID PADDLE' from the edge of `MOUNT, CONVEYING GUIDE' (used for
DF-610), the `EDGING, EDS-17L (KITAGAWA)' has been added as wire protection. In addition, the hole shape
for the wires on `MOUNT, CONVEYING GUIDE' has been changed in order to attach the `EDGING, EDS-17L
(KITAGAWA)'.

4)        Common use of certain parts with next new models

f. A screw hole has been created into the `MOUNT, CONVEYING GUIDE'.



Please refer to Fig. 1 on next page
Change 1
a. See dotted arrows in Fig.1.
b. See red arrows in Fig 1.
c. The hook parts of `RIGHT GUIDE SUB CONVEYING': dotted blue circled section
   The hook parts of `UPPER GUIDE, SUB CONVEYING': red circled section

Change 2-d

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo