Service Manuals, User Guides, Schematic Diagrams or docs for : Kyocera Printer _OPTIONS DU-20-21 SDU20C02

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download SDU20C02 documenatation <<

Text preview - extract from the document

Chapter 2 Maintenannce



Contents


2.1. Introduction, 2-2
2.2. Disassembly procedures, 2-3
   2.2.1. Removing the duplexer from the printer, 2-3
   2.2.2. Removing the duplexer drawer, 2-4
   2.2.3. Removing the top rear cover, 2-5
   2.2.4. Removing the top cover assembly, 2-5
   2.2.5. Removing the drive gear assembly, 2-6
   2.2.6. Removing the passage assembly, 2-6
   2.2.7. Removing the passage base, 2-7
   2.2.8. Removing the guide plate assembly and guide plate B, 2-8
   2.2.9. Removing the adjuster assembly, 2-8
   2.2.10. Removing the adjuster assembly, 2-9
   2.2.11. Removing the front cover assembly, 2-10
   2.2.12. Removing the front guide assembly, 2-11
   2.2.13. Removing the pickup roller assmbly, 2-11
   2.2.14. Removing entrance guide B, 2-12
   2.2.15. Removing the entrance guide assembly, 2-12
   2.2.16. Removing the clutch feed drive, 2-13
2.3. Cleaning procedure, 2-15
2.4. Adjustment, 2-16
   2.4.1. Jig to be used:, 2-16
           ]




                                  2-1
2.1. Introduction


    This chapter explains the following subjects:

    Section 2.2. Disassembly procedures on page 2-3 explains the disassembly
    procedures, showing pictures, required to replace parts in the duplexer. Sec-
    tion 2.3. Cleaning procedure on page 2-15 explains procedures for cleaning
    those parts which reqruire periodic cleaning. Section 2.4. Adjustment on
    page 2-16 is for instructions on adjustments.

    Note that the duplexer requires no lubrication at any of its parts.




                                 2-2
 2.2. Disassembly procedures


           This section provides procedures for disasembly of the duplexer. When
           replacing parts for which there is no specific procedure described in this sec-
           tion, refer to the exploded view shown in chapter 4.

           Before proceeding with disassembly, be sure to read the notes below.

       

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo