Service Manuals, User Guides, Schematic Diagrams or docs for : Keithley DAS 24682A(DAS-4300Addendum)
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 24682A(DAS-4300Addendum) documenatation <<Text preview - extract from the document DAS-4300 Series Addendum
This document describes changes made to the DAS-4300 Series boards in
order to achieve compliance with the European EMC directive 89/336
EEC (CE Mark certification). In addition, this addendum provides
corrections to the DAS-4300 Series documentation.
Clock Output
Pins 5 and 12 of U514 (74ABT125) have been lifted in order to disable
the clock output function. If you connect multiple DAS-4300 Series
boards and want to use one internal clock for all the boards, you need to
replace the pins.
Spring Gaskets
Spring gaskets have been installed over the BNC connectors. When a
cable is attached, these gaskets are compressed between the cable
connector and the bracket.
Manual Corrections
The DAS-4300 Series Function Call Driver User's Guide states
incorrectly that the start trigger should be external when using an about
trigger. The start trigger must be internal when using an about trigger.
Part No. 24682; Revision A 1
The following information is missing from the description of the pCount
parameter of the K_IntStatus function in the DAS-4300 Series Function
Call Driver User's Guide:
q Normal acquisition
pCount = 0 during the operation
pCount = buffer length (total number of samples acquired) when the
operation completes
q About-trigger acquisition
pCount = 0 during the operation
pCount = pre-trigger length (number of samples acquired before the
about trigger occurred) when the operation completes
2 November 1999
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo