Service Manuals, User Guides, Schematic Diagrams or docs for : Keithley Kits 071316800(2290-10-RMK-1)
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 071316800(2290-10-RMK-1) documenatation <<
Text preview - extract from the document
Model 2290-10-RMK-1
Keithley Instruments, Inc.
28775 Aurora Road
Single Rack-Mount Kit Instructions
Cleveland, Ohio 44139
1-888-KEITHLEY
http://www.keithley.com
Introduction
This document provides instructions for the Model 2290-10-RMK-1 single fixed rack-mount kit. The kit contains
mounts needed to install one Model 2290-10 High Voltage Supply in a standard 19-inch rack. Hardware is
included to attach the instruments to the rack ears (use existing hardware to mount the assembly into the rack).
Parts list
The parts list below contains a description of the parts supplied with the Model 2290-5-RMK-1 single fixed
rack-mount kit.
Item number Quantity Description Use
1 2 Handle Attached to rack ears
2 4 Truss head screws Screws removed from the instrument
to secure rack ears to instrument
3 4 Flat head screws Handle
4 1 Rack ear Instrument side rack ear
5 1 Rack ear Blank side rack ear
071316800 *P071316800* 1
2290-10 kV Single Rack Mount Kit
Installation
The next figure provides an exploded view of the rack mounting kit, the instrument, and the rack face.
Step-by-step assembly and mounting instructions are given below.
Before installing the instrument in the rack, be sure that the rack angle bracket or shelf is in place and
adjusted to accept and support the instrument. Under no circumstances should the instrument's entire
weight be supported solely by the hardware and brackets supplied in the mounting kit.
1. Mount handles (1) to both rack ears (4 and 5) securing each handle with two flat head screws (3).
2. Determine which side of the rack (left or right) will contain the instrument.
3. Install the instrument side rack ear (4) to the instrument and secure with two truss head screws that were
removed from the instrument (2). The next figure shows the instrument mounted on the left side of the rack.
When you remove the truss head screws to install the rack ears, you will need to re-use the screws to
secure the rack ears on the outside edge of each instrument.
4. Install the blank side rack ear (5) and secure with two truss head screws that were removed from the
instrument (2).
5. Install assembly (instrument and installed rack ears) in the rack. Secure the assembly with existing hardware
(see the next figures).
Figure 1: Model 2290-10 single rack mount kit installation
2 071316800
2290-10 kV Single Rack Mount Kit
Figure 2: Model 2290-10 suggested single rack fastener installation
071316800 3
2290-10 kV Single Rack Mount Kit
The next figure shows the hardware that you will receive with your rack mount kit. You can use this figure, the
Parts list (on page 1), and the previous figures to ensure that you have all of the necessary hardware to mount
your instruments.
Figure 3: Model 2290-10 single rack mount kit hardware
4 071316800
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo