Service Manuals, User Guides, Schematic Diagrams or docs for : LG Microwave MS-197XE MS197XE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MS197XE


>> Download MS197XE documenatation <<

Text preview - extract from the document
MICROWAVE OVEN
SERVICE MANUAL
MODEL: MS-197XE
CAUTION
BEFORE SERVICING THE UNIT, READ THE
SAFETY PRECAUTIONS IN THIS MANUAL.




                                      NOM   NYCE

                                      061
                                SAFETY PRECAUTIONS
This device is to be serviced only by properly qualified service personnel.
Consult the service manual for proper service procedures to assure continued safety operation and for precautions to be
taken to avoid possible exposure to excessive microwave energy.



    PRECAUTIONS TO BE OBSERVED BEFORE AND
    DURING SERVICING TO AVOID POSSIBLE
    EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
    A) Do not operate or allow the oven to be operated with the door open.
    B) Make the following safety checks on all ovens to be serviced before activating the magnetron or other
       microwave source, and make repairs as necessary; (1) interlock operation, (2) proper door closing, (3)
       seal and sealing surfaces (arcing, wear, and other damage), (4) damage to or loosening of hinges and
       latches, (5) evidence of dropping or abuse.
    C) Before turning on microwave power for any service test or inspection within the microwave generating
       compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment,
       integrity, and connections.
    D) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation
       and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual
       before the oven is released to the owner.
    E) A microwave leakage check to verify compliance with the CSA should be performed on each oven prior to
       release to the owner.




                                               CAUTION
                                      MICROWAVE RADIATION
    DO NOT BECOME EXPOSED TO RADIATION FROM THE MICROWAVE GENERATOR
    OR OTHER PARTS CONDUCTING MICROWAVE ENERGY.
                                                                                                  CONTENTS
                                                                                                                                                                                                                                                    (Page)

SAFETY PRECAUTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Inside front cover

SPECIFICATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1

CAUTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-1

INSTALLATIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-1

OPERATING INSTRUCTIONS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

       FEATURES- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

       CONTROL PANEL - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-1

       OPERATING SEQUENCE- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2

       SCHEMATIC DIAGRAM - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-3

       CIRCUIT DESCRIPTION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4

SERVICE INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1

       TOOLS AND MEASURING INSTRUMENTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1

       MICROWAVE LEAKAGE TEST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-1

       MEASUREMENT OF MICROWAVE POWER OUTPUT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3

       DISASSEMBLY AND ADJUSTMENT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3

       INTERLOCK CONTINUITY TEST- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-7

       COMPONENT TEST PROCEDURE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8

       TROUBLE SHOOTING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-11

EXPLODED VIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-1

REPLACEMENT PARTS LIST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-1

SCHEMATIC DIAGRAM OF P.C.B. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-1
       PRINTED CIRCUIT BOARD - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2

P.C.B. PARTS LIST - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-1
                                    SPECIFICATIONS

        ITEM                                                         DESCRIPTION
        MODEL                MS-197XE

Power Requirement            120 Volts AC 60 Hz
                             1,500 Watts
                             Single phase, 3 wire grounded

Power Output                 1000 Watts full microwave power (IEC705)

Microwave Frequency          2,450 MHz

Magnetron                    2M246, 2M248J

Timer                        0 ~ 99 min. 99 sec.

Outside Dimensions           607 mm (W) x 344 mm (H) x 477 mm (D)

Cavity Dimensions            434 mm (W) x 263 mm (H) x 465 mm (D)

Net Weight                   19 kg (approx.)

Shipping weight              21 kg (approx.)

Control Complement           Touch Control System
                             Clock : 1:00 - 12:59
                             Microwave Power for Variable Cooking
                             Power level
                             HIGH ----------------------------------------Full power throughout the cooking time
                             9 (Saute) -------------------------approx. 90% of Full power,    8 (Reheat) --------approx. 80%
                             7 (Med.-High) --------------------approx. 70%,                   6 (Medium) --------approx. 60%
                             5 (Med.-Low) --------------------approx. 50%,                    4 (Defrost) ---------approx. 40%
                             3 (Low) ---------------------------approx. 30%,                  2 (Simmer)---------approx. 20%
                             1 (Warm)--------------------------approx. 10%

Nameplate Location

                                                                                         Back Side



Accessories                  Owner's manual & cooking guide
                             Glass turntable
                             Rotating ring


This microwave oven is designed for household use only.
It is not recommended for commercial purposes.

                                                          1-1
                                                CAUTIONS

   Unlike other appliances, the microwave oven is
   high-voltage and high-current equipment.
                                                                    MICROWAVE RADIATION
   Though it is free from danger in ordinary use,                   Personnel should not be exposed to the
   extreme care should be taken during repair.                      microwave energy which may radiate from the
                                                                    magnetron or other microwave generating
                                                                    device if it is improperly used or connection.



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo