Service Manuals, User Guides, Schematic Diagrams or docs for : LG Mobile Phone LG W3000 LG W3000 10

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download LG W3000 10 documenatation <<

Text preview - extract from the document

                                                                               11. STAND ALONE TEST



11. STAND ALONE TEST

 11.1 Introduction
     This manual explains how to examine the status of RX and TX of the model.

  A. Tx Test
     TX test- this is to see if the transmitter of the phones is activating normally

  B. Rx Test
     RX test- this is to see if the receiver of the phones is activating normally.

 11.2 Setting Method

  A. COM port
     a. Move your mouse on the "Connect" button, then click the right button of the mouse and select
        "Com setting".
     b. In the "Dialog Menu", select the values as explained below.
       - Port : select a correct COM
       - Baudrate : 38400
       - Leave the rest as default values

  B. Tx
    1. Selecting Channel
        - Select one of GSM or DCS Band and input appropriate channel.
    2. Selecting APC
     a. Select either Power level or Scaling Factor.
     b. Power level
       - Input appropriate value GSM (between 5~19) or DCS (between 0~15)
     c. Scaling Factor
       - A `Ramp Factor' appears on the screen.
       - You may adjust the shape of the Ramp or directly input the values.

  C. Rx
    1. Selecting Channel
      - Select one of GSM or DCS Band and input appropriate channel.
    2. Gain Control Index (0~ 26) and RSSI level
      - See if the value of RSSI is close to -16dBm when setting the value between 0 ~ 26 in Gain
        Control Index.
      - Normal phone should indicate the value of RSSI close to -16dBm.



                                                 - 121 -
11. STAND ALONE TEST



 11.3 Means of Test
      a. Select a COM port
      b. Set the values in Tx or Rx
      c. After setting them all above, press Start button of Signal.




                                                  - 122 -
                                                                            12. AUTO CALIBRATION



12. AUTO CALIBRATION

 12.1 Overview
    AutoCal (Auto Calibration) is the PC side calibration tool that perform Rx and Tx calibration with
    Agilent 8960 or other equipment. AutoCal generate calibration data by communicating with phone
    and measuring equipment and write it into calibration data block of flash memory in GSM phone.

 12.2 Requirements
    

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo