Service Manuals, User Guides, Schematic Diagrams or docs for : LG Audio FFH-293AX FFH-1920_1950_TROUBLE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
FFH-1920_1950_TROUBLE


>> Download FFH-1920_1950_TROUBLE documenatation <<

Text preview - extract from the document
                     TROUBLESHOOTING


   Turn power on.




                                                      Check power supply circuit.
                                   NO                 PN508 PIN 8, 6.2V
     Is power on?                                     PN508 PIN 7, 5V
                                                      IC503 PIN 2, 3.3V


    YES




                          NO                                NO
Does initial read work?          Check the DISK turns               Check the connector
                                                                   PN502, PN503, PN507
                                              YES
                                                                                    YES
                                    Check the Laser
    YES
                                              YES

                                 Check the focus circuit
                                              YES
                               Check the TRAKING circuit


                                   NO
     Does it play?                                  Check the tracking servo circuit.



    YES




                                   NO
 Does it output audio?                                  Check the PN508 PIN1, 3



    YES



          OK




                                   - 2-2 -
Fails to initial read

                                          NO       Check the Voltage change of PN 507          NO     Defective connector
               Disc motor turns                           pin2(OPEN, CLOSE)                                 PN507

                 YES                                            YES

           Does RF waveform appear?                    Check the Data transmission from               Defective connector
                                          NO                                                   NO
                  IC501 Pin4                               PN507 pin8 to CD DSP                        PN507 Defective
                                                                              5V
                                                                                                           MICOM
                                                                              0V

                                                                YES
                                                       Check the Data transmission from               Defective connector
                                                           PN507 pin6 to MICOM                         PN507 Defective
                                                                                               NO
                                                                              5V
                                                                                                             IC501
                                                                              0V

                                                                YES

                                                 Check the change of SLDO                 2V   NO       Defective IC501
                                                   Voltage(IC501 pin23)                   1V

                                                                                          0V

                                                                YES

                                                 Check the change of SL +,            1.2V     NO       Defective IC502
                 YES                                   SL - Voltage                   0V
                                                    (IC502 pin 18, 19)
                                                                                      0.8V




                                                                               YES             Defective contact PN503
                                   Does laser light?                                             Defective PICK-UP
                                                                                     A
                                         YES
                               Does FA+ waveform appear at
                                      IC502 pin13?


                                   focus coil drive wareform.
                                              YES
                                  Does TE waveform appear at
                                         IC501 pin 15?
                                                                                      B
                               TRACKING ERROR wareform
                                        YES

                                       Is rotation normal?

                                                                               NO

                                             YES

                              Is there no dropout of RF signal?
                                                                                                     Defective IC501
                                                                              YES                   Defective PICK-UP




                                                              - 2-3 -
  A             Laser does not light.




  Is "3.5V" applied to pin 80 of IC 501?


YES                     NO

                                        NO                                  NO
          Did pickup return to                Is data transferred from                 Defective MICOM.
          innermost circular?                 MICOM IC ?

                 YES                                       YES


                                              Does voltage appear at IC     NO
                                              502 pin 18,19 ?                          Defective IC 501, 502




                                                           YES                         Defective slide motor and/or
                                                                                       connector.




        Does it stop at inner pick              Is defect output from LM
        circular after shift?                   SW applied to pin 5 of
                                        YES     PN503?                          NO     Defective LMT SW and/or
                                                                                       connector.
                                                 OPEN       CLOSE


                                                           YES                         Defective MICOM.


YES
                                                          NO
   Is power supplied to laser Q501?                                                  Defective connector.
      (Q 501 collector: about 1.8V)
                                                        R508



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo