Service Manuals, User Guides, Schematic Diagrams or docs for : Philips Monitor CD 2001 Monitor CD 2001 E-MANUALS Philips crt 109p2 PDF P03
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download P03 documenatation <<
Text preview - extract from the document
Technical Data 109P2 GS3 CM25 3
9 Go to cover page
Technical Specification*
CRT
Size and deflection :19 inch/46cm,90 defection angle
O
Dot pitch/Grille pitch : 0.24mm White Color Temperature
Chromaticity CIE coordinates:
Tube type : Aperture grille, flat, high at 9300 ok x = 0.283 y = 0.297
contrast, anti-glare, anti-static, 6500 ok x = 0.313 y = 0.329
anti reflection, light 5500 k x = 0.332 y = 0.347
o
transmission 41%
Phosphor : P22
Physical Specifications
Recommended display
area : 14.0"x10.4"/355 x 265 mm Dimensions : 456x476x437mm(including base)
456x416x437mm(excluding base)
Maximum display area : 14.4"x10.8"/365 x 274 mm weight : 23.5 Kg
Scanning Power supply : 90 - 264 VAC, 50/60HZ
Horizontal scanning : 30 - 111 KHz
Vertical scanning : 50 - 160 Hz Operating condition
Temperature : 0 C - 35 C
O O
Video Relative Humidety : 10 % - 90 %
Video dot rate : 261 Mhz Storage condition
Input impedance Temperature : - 25 C - 60 C
O O
-Video : 75 Ohm Relative Humidity : 5 % - 95 %
- Sync : 2.2 kOhm
Input signal levels : 0.7Vpp
Separate sync
Sync input signal : Composite sync
Sync polarities : Positive and negative
Pin assignment : Automatic Power Saving
The 15-pin D-sub connector(male) of the signal cable
(IBM systems) : If you have VESA's DPMS compliance display card or
software installed in your PC,the monitor can automaticlly
reduce its power consumption when not in use. And if an
input from a keyboard, mouse or other input devices is
detected, the monitor will automatically "wake up". The
1
following table shows the power consumption and
5
6 10 signalling of this automatic power saving features :
11 15
Power Management Definition
POWER LED
VESA's mode VIDEO H-SYNC V-SYNC POWER
USED SAVING( % ) COLOR
Pin No. Assignment Pin No. Assignment ON Active Yes Yes Typical
120W 0% Green
1 Red video input 9 No pin Stand-by Blanked No Yes <6W 95 % Yellow
2 Green video input 10 Logic ground Suspend Blanked Yes No <6W 95 % Yellow
3 Blue video input 11 Identification output - OFF Blanked No No <3W 97 % Amber
4 Identification output - Connected to pin 10
Connected to pin 10 12 Serial data line(SDA)
This monitor is Energy Star compliant .As an ENERGY STAR
5 Ground 13 H.Sync /H+V Partner, PHILIPS has determined that this product meets the
6 Red video ground 14 V.Sync(VCLK for DDC) ENERGY STAR guidelines for energy efficiency.
7 Green video ground 15 Data clock line(SCL)
8 Blue video ground
Back Forward
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo