Service Manuals, User Guides, Schematic Diagrams or docs for : Philips Stofzuigers FC8412
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download FC8412 documenatation <<
Text preview - extract from the document
City Line Chicago Vacuum cleaner
FC8412
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION - To disassemble the cordwider use Torx screw driver no T10, which
is one of set consisting of :
- Electronic controled motor rpm T20, T15, T10, T9, T8, T7 and T6 = 4822 395 50145.
- Cordwinder build-in with flat cord - First remove the 2 screws B of
- Dustbag-full indicator in dustcover (item 15) hinge turn. Remove
- The Infrared remote control can adjust the suction (item 10) window of the
power with 5 speeds. When switched on, the appliance PCB-holder by placing a small
always starts with the highest power, even without a screwdriver in the recesses on
both sides of the window and
connected hose. Use LR03 batteries, Alkaline is advised.
opening the snap connection.
- This product meets the requirements regarding
interference suppression on radio and TV. - Remove the PCB-holder of
- After the product has been repaired, it should function (item 10) from the upper housing
properly and has to meet the safety requirements as by placing a flat screwdriver
officially laid down at this moment. between the front of the PCB-
holder and the upper housing
as shown in the drawing. The
TECHNICAL INFORMATION PCB-holder has snaps which fit
- Maximum air displacement : 34 l/sec into the upper housing.
- Maximum vacuum water column : 280 cm
- Power consumptio (IEC) 225V : 1400 W REPAIR INSTRUCTION
- Dust storage capacity : 2 litres - Give attention that the contact fingers (item 45) are placed on
- Cord length (depends on version) : 6m the cord-winder shaft in such a way that the pressure point of the
- Filter system : 6 filters cordwinder knob to the cord winderlever (item 40) is vertical.
- The spare parts have been standardized as much as possible.
- Dimensions cleaner : 37 x 28 x 23 cm
- Component configuration on exploded view may differ in case of
- Weight + accessoiries on board : 4.3 kg specific versions, however, the actual components are distinguished
- Noise : 80 dB by means of code numbers.
- Colour : Violet shadow - Item 1 Cotton dustbag is used in those countries where paper
dustbags are not available
DISASSEMBLY- AND RE-ASSEMBLY ADVISE - Item 41 Cord-winder spring unit is provided with a long spring,
both long and short cords can be used in combination with this
- To open the appliance, first remove the screws A,B,C,D. spring.
- To reach the motor remove the screws E. - Cordwinder spring has to be tensioned till maximum minus
approx. 1,5 revolution.
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo