Service Manuals, User Guides, Schematic Diagrams or docs for : Philips Pm5326

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Pm5326


>> Download Pm5326 documenatation <<

Text preview - extract from the document
R F signal generator




    lnst ruction manual
             9499 5 2 0 0 8 0 0 2
Qservice ----- This Document is a complete scan from the Original Tektronix Manual ----- Qservice
Please note

In correspondence concerning this instrument, please quote the type number and serial number a given on the
                                                                                              s
type plate.


Bitte beachten

Bei Schriftwechsel ijber dieses Gerat wird gebeten, die Typennummer und die Geratenummer anzugeben. Diese
befinden sich auf dem Typenschild an der Ruckseite des Gerates.


Noter s. v. p.

Dans votre correspondance et dans vos reclamations s rapportant B cet appareil, veuillez toujours indiquer le
                                                        e
numero de type et le numero de serie qui sont marques sur l a plaquette de caracteristiques.




important

As the instrument is an electrical apparatus, it may be operated only by trained personnel. Maintenance and repairs
may also be carried out only by qualified personnel.


Wichtig

Da das Gerat ein elektrisches Betriebsmittel ist, darf die Bedienung nur durch eingewiesenes Personal erfolgen.
Wartung und Reparatur durfen nur von geschultem, fach- und sachkundigem Personal durchgefuhrt werden.


lmportant

Comme I'instrument est un equipement Blectrique, le service doit &re assure par du personnel qualifie. De &me,
I'entretien et les reparations sont B confier aux personnes suffisement qualifies.




                                   @ Philipr GmbH - Hamburg - Germany - 1979
                                                  All rights are strictly reserved.
     Reproduction or divulgation in any form whatsoever is not permitted without written authority f r o m the copyright owner.
                                         Issued by Philips G m b H   - Werk fur Messtechnik
                                                        Printed in Germany
CONTENTS


       GENERAL
       l ntroduction
       Technical data
       Accessories
       Operating principle

       INSTALLATION
       Safety regulations
       Mounting
       Earthing
       Dismantling the instrument
       Mains connection

       OPERATING INSTRUCTION
       Controls and sockets
       Operation and application
       Application examples

       SERVICE PART
       Circuit description
       Access to parts
       Check and adjustment
       Check after repair and maintenance
       Parts list




LIST OF FIGURES


       Block diagram, complete
       Front view
       Amplitude modulation
       Frequency modulation, adjustment of carrier frequency
       Wobbling with adjustable frequency marker, adjustment of centre frequency (RF center)
       Wobbling with adjustable frequency marker spectrum
       External frequency counter; generator for 1 kHz sine, 3 - 30 Hz
       mains frequency with phase shifter
       Front view, mechanical parts
       Top view
       Bottom view
       Unit 1
       Unit 4
       Unit 6
       Unit 3
       Unit 2
       Unit 5
       Overall circuit diagram
       Circuit diagram: units 2, 3, 8, parts of unit 6
       Circuit diagram: units 1,4, 5, parts of 6
       Unit 8
     ALLGEMEINES
     Einleitung
     Technische Daten
     Zubehor
     Funktionsprinzip

     VORBEREITUNGSANWEISUNGEN
     Sicherheitstechnische Hinweise
     Aufstellen
     Erden
     Offnen des Gehauses
     Netzanschluss

     BETRIEBSANLEITUNG
     Bedienungselemente und Anschlusse
     Bedienung und Anwendung
     Anwendungsbeispiele




1.   Blockschaltbild, gesamt
2.   Frontansicht
3.   Amplitudenmodulation
4.   Frequenzmodulation, Kalibrierung der Tragerfrequenz
5.   Wobbeln, mit verschiebbarer Frequenzmarke, Einstellung der Mittenfrequenz ( R F center)
6.   Wobbeln, mit verschiebbarem Frequenzmarkenspektrum
7.   Zahler fiir externe Frequenzen; Generator fur 1 kHz sinus, fur 3   - 30 Hz A ,
     fur Netzfrequenz mit Phasenschieber
TABLE DES MATIERES


       GENERALITES
       Introduction
       Caracteristiques techniques
       Accessoires
       Principe de fonctionnement

       INSTALLATION
       Consignes de securite
       Montage
       Mise B la terre
       Demontage de I'appareil
       Branchement de I'appareil

       MlSE EN SERVICE
       Commandes et douilles
       Foqctionnement et application
       Exemples d'application




RAPPEL DES FIGURES


       Schema synoptique
       Face avant
       Modulation d'amplitude
       Modulation de frbquence, reglage de la frequence porteuse
       Wobbulation avec marque decalable de frequence, reglage de la frequence centrale ( R F center)
       Wobbulation avec spectre decalable de reperes de frequence
       Compteur des frequences externes; genbrateur pour 1 kHz sinus, 3 - 30 Hz A ,
       frequence secteur avec dephaseur
Operating manual
Qservice ----- This Document is a complete scan from the Original Tektronix Manual ----- Qservice
         TECHNICAL DATA

         General information:

         On delivery from the factory, the instrument complies with the safety regulations of measuring and
         control equipment. The information and warnings contained in this instruction manual must be followed
         by the user to ensure safe operation and to maintain the instrument in a safe condition.

         - Only data with indicated tolerances or limits are guaranteed; data without tolerances are given only
           for guidance.
         - All specifications will be met after a warm-up time of 30 min. when keeping the instrument in a
           constant mounting position.
         - Inaccuracies (absolute or in %) relate to the indicated reference value.

         SPECIFICATIONS

         R F Generator

         Frequency range                              0,l    - 125    MHz
         Ranges                                       0.1    - O,25   MHz
                                                      0,25   - 0,5    MHz
                                                      0,5    -   1    MHz
                                                      1      - 2,5    MHz
                                                      2,5    - 5      MHz
                                                      5      - 10     MHz
                                                     10      - 25     MHz
                                                     25      - 50     MHz
                                                     50      - 125    MHz
         Frequency display                           5-digit LED display, red, 11 mm high;
                                                     3 decimal points;
                                                     2 LEDs for dimension kHz, MHz
         Error of the display                         <       typical, +I digit
         Temperature coefficient of the display      - x 1O - ~ / O C at 23 OC
                                                     +5                           f20 OC
         Temperature coeffiecient of the frequency    < 10-51



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo