Service Manuals, User Guides, Schematic Diagrams or docs for : Quanta Quantum Fireball SE jumpers
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Quantum Fireball SE jumpers documenatation <<Text preview - extract from the document Fireball SE
Mounting Guidelines
Fireball SE Mounting Guidelines
Mounting
The mounting holes on the Quantum Fireball SE hard disk drive allow the drive to be mounted in any orientation.
Figure 1-1 identifies the location of the three mounting holes found on each side of the drive and the four mounting
holes found on the PCB side of the drive. Dimensions given are in millimeters.
Mounting Screw Clearance
Please note that the printed-circuit board assembly (PCBA) is very close to the mounting holes. For mounting #6-
32 UNC screws are recommended. Mounting screws should be no longer than 0.25 inches (6.35 mm) and
maximum torque applied to the screws must not exceed 8 inch-pounds. Clearance from the drive to any other
surface (except mounting surfaces) must be a minimum of 0.05 inches (1.25 mm).
Ventilation
The Quantum Fireball SE hard disk drive operates without a cooling fan, provided the ambient air temperature does
not exceed 131
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo