Service Manuals, User Guides, Schematic Diagrams or docs for : Quanta Quantum Fireball lct08 jumpers

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Quantum Fireball lct08 jumpers


>> Download Quantum Fireball lct08 jumpers documenatation <<

Text preview - extract from the document
                                                              Fireball lct08
                                                              fireball_lct08_jumper.pdf




Jumper Settings



                                         DS            CS           PK          Rsvd
Stand Alone (Default)                    ON           OFF            X           OFF
Master with Slave Present                ON           OFF            X           OFF
Slave to Master                          OFF          OFF            x           OFF
Cable Select *                           OFF          ON             X           OFF


X= PK is a Parking position. The presence or absence of this jumper has no effect on the drive. Labeling may
indicate to place this jumper when configuring as a slave. This is to provide for retention of the jumper in the event
that it is needed later.

*Note: Cable Select (CS) utilizes a special cable configuration where the drive setting (Master or Slave) is
determined by its position on the 40-pin ATA cable. In this type of configuration both drives will have their jumper
set to CS. Cable Select is utilized on some OEM systems and is typically required for systems utilizing Ultra ATA/66.
For Ultra ATA/66 compliant cables, the master drive is placed on the outside (end) cable connector and the slave
drive is placed on the intermediate cable connector.




1 of 1
                                                             Fireball lct08
                                                             fireball_lct08_jumper.pdf




Jumper Locations

The Maxtor



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo