Service Manuals, User Guides, Schematic Diagrams or docs for : Stanford Research Systems www.thinksrs.com-IG1dualapp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download www.thinksrs.com-IG1dualapp documenatation <<

Text preview - extract from the document

www.thinkSRS.com                                                                                             1



Dual Ionization Gauge Connector Box
Option O100IG

The standard IGC100 controller can connect to, and display pressures from, only one ionization gauge.
The Dual Ionization Gauge Connector Box (SRS Model # O100IG) is an optional component that, when
attached to an IGC100, makes it possible to simultaneously connect two ionization gauges to the IGC100.
An IGC100 properly fitted with the O100IG optional box can switch operation between two independent
ionization gauges (i.e. sequential operation) from the front panel, and measure pressure at a first or second
location (IG1 or IG2) at a small fraction of the cost of a second instrument.

The O100IG option is easily installed in the field making it easy to extend the capabilities of the IGC100
controller as needed.


In This Application Note
What does the Kit include?                      3
Installation                                    3




(408)744-9040                                                                Stanford Research Systems
www.thinkSRS.com
2   Dual Ionization Gauge Connector




    Stanford Research Systems              (408)744-9040
                                      www.thinkSRS.com
                                                 Dual Ionization Gauge Connector                    3



What does the Kit include?
          The O100IG Option Kit includes all the components required to add a second ionization
          gauge connection port to your IGC100 controller. The basic package includes...

          1. Dual Gauge Connector Box.
          2. Connection Cable ( connects O100IG box to IGC100 controller)
          3. Mounting pins ( for side mounting)
          4. Fastening screw (for side mounting).
          5. Instructions sheet.


Installation
          IMPORTANT
          For the most compact design and safest operation, SRS recommends you mount the
          O100IG box on the left side of the IGC100 controller as shown below in Fig. L-1.
          However, side mounting is not a requisite for the proper operation of the O100IG option
          (i.e. steps 1 

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo