Service Manuals, User Guides, Schematic Diagrams or docs for : Stanford Research Systems www.thinksrs.com-LDC Note 11 LDC500 Series Laser Driver_25E2_2580_2599s Setpoint Slew Rate
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download www.thinksrs.com-LDC Note 11 LDC500 Series Laser Driver_25E2_2580_2599s Setpoint Slew Rate documenatation <<
Text preview - extract from the document
LDC500 Series Laser Driver's Setpoint Slew Rate
The output current setpoint slew rate on the LDC500 and LDC501 is set to 0.2 mA/ms
(0.2 Amp/sec) when you set the laser current from front panel buttons or the control wheel, or
from a remote command. The slew rate is always the same despite range, bandwidth and mode
settings.
For example, it will always take 500 ms for a 100 mA change in the output current, in high or
low range, in high bandwidth or low bandwidth mode, and in Constant Current mode or
Constant Power mode.
The only way to get a fast output current change is to use modulation. The current change rate is
determined by the bandwidth setting and may also be affected by cable parasitics.
The LDC502 output current setpoint slew rate is set to 0.7 mA/ms (0.7 Amp/sec) for all range,
bandwidth and mode settings.
Stanford Research Systems www.thinksrs.com (408)744-9040 -1-
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo