Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung LCD Proj SP43W6 user manual
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download user manual documenatation <<
Text preview - extract from the document
COLOUR
TELEVISION
SP43T8
SP42W4
SP43W6
SP42Q2
Owner's Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
Important Warranty Information Regarding Television
Format Viewing
ENG
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
3
ENG
Contents
FOREWORD
Important Warranty Information Regarding Television Format Viewing ........ 3
CONNECTING AND PREPARING YOUR TELEVISION
Control Panels (depending on the model) ..................................................... 6
Connection Panels (depending on the model) .............................................. 7
Using a Display Deck (depending on the model) .......................................... 8
Inserting the Batteries in the Remote Control................................................ 8
Infrared Remote Control ................................................................................ 9
Connecting to an Aerial or Cable Television Network ................................... 10
Connecting a Satellite Receiver or Decoder.................................................. 11
Switching Your Television On and Off........................................................... 12
Placing Your Television in Standby Mode ..................................................... 12
Becoming Familiar with the Remote Control ................................................. 13
Plug and Play Feature ................................................................................... 14~15
Displaying Information ................................................................................... 15
Choosing Your Language.............................................................................. 16
Adjusting the Screen Automatically (Self Focus)........................................... 17
Deactivating the Automatic Execution of the Self Focus ............................... 18
Removing the "Self Focus" from the Display ................................................. 19
SETTING THE CHANNELS
Storing Channels Automatically..................................................................... 20
Sorting the Stored Channels ......................................................................... 21
Storing Channels Manually............................................................................ 22~23
Skipping Unwanted Channels ....................................................................... 24
Assigning Names to Channels ...................................................................... 25
Locking the Channel...................................................................................... 26
Fine Tuning Channel Reception .................................................................... 27
USING YOUR TELEVISION
Using the LNA (Low Noise Amplifier) Feature............................................... 28
Changing the Picture Standard ..................................................................... 29
Customizing the Picture Settings................................................................... 30
Selecting the Picture Size (4:3 Model) .......................................................... 31
Selecting the Picture Size (Wide Model) ....................................................... 32~33
Selecting the Scan Mode............................................................................... 34
Using the Digital NR (Digital Noise Reduction) Feature ................................ 35
Setting the Blue Screen Mode....................................................................... 36
Freezing the Current Picture ......................................................................... 36
Changing the Sound Standard ...................................................................... 37
Adjusting the Sound Settings ........................................................................ 38
4
ENG
Contents (continued)
USING YOUR TELEVISION (continued)
Extra Sound Settings..................................................................................... 39
- Auto volume
- Dolby Virtual
Setting the Melody Sound ............................................................................. 40
Selecting the Sound Mode (depending on the model) .................................. 41
Setting and Displaying the Current Time....................................................... 42
Setting the Sleep Timer ................................................................................. 43
Switching the Television On and Off Automatically ....................................... 44
Viewing an External Signal Source ............................................................... 45
USING THE TELETEXT FEATURE
Teletext Feature ............................................................................................ 46
Displaying the Teletext Information ............................................................... 47
Selecting Display Options.............................................................................. 48
Selecting a Teletext Page.............................................................................. 49
Storing Teletext Pages (depending on the model) ........................................ 50
ADDITIONAL INFORMATION ON CONNECTIONS
Connecting to the External Input/Outputs...................................................... 51
Connecting to the Audio Output .................................................................... 52
Connecting to the RCA Input......................................................................... 53
Connecting to the S-Video Input.................................................................... 54
Connecting to the Component Input.............................................................. 55
Redirecting an Input to the External Output .................................................. 56
RECOMMENDATIONS FOR USE
Programming the Remote Control for Other Components ............................ 57~59
- VCR Remote Control Codes ...................................................................... 58
- DVD Remote Control Codes ...................................................................... 58
- Cable Box (CATV) Remote Control Codes ................................................ 59
Troubleshooting: Before Contacting Service Personnel................................ 60
Symbols
Press Important Note
5
Control Panels (depending on the model)
ENG
The actual configuration on your TV may be different, depending on
your model.
( a ) Input Source Selection ( e ) Channel Selection
( b ) Menu Display (f) Remote Control Sensor
( c ) Accessing to the Selected Option ( g ) Standby & Timer Indicator
on the Menu System
( h ) Power On/Off
( d ) Volume Adjustment
(i) Picture On/Off
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
Switch on the TV when it is in Standby mode and select channels ( C/P. )
Access the menu ( MENU )
Adjust the volume ( - +)
Switch among Video input modes (SOURCE ) and access to the selected option on the menu
system ( )
6
Connection Panels (depending on the model)
The actual configuration on your TV may be different, depending on
ENG
your model.
Side of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Rear of the TV
Component Input
75 Coaxial Connector for Aerial or Cable Network
SCART Audio/Video Input/Output
Audio Output
For further details about connection, refer to pages 51~55.
Whenever you connect an audio or video system to your television, ensure that all elements are switched
off. Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
7
Using a Display Deck (depending on the model)
ENG
You can display a VCR or DVD Player, etc. by using the display
deck.
SP43W6
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
Purchase the television
Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2 Insert two R03, UM4, "AAA" 1.5V or equivalent batteries taking
care to respect the polarities:
+ on the battery against + on the remote control
- on the battery against - on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
8
Infrared Remote Control
ENG
TELEVISION STANDBY
PICTURE SIZE/
TELETEXT SIZE SELECTION
TUNER/CABLE NETWORK MAKE THE REMOTE CONTROL WORKS
SELECTION FOR TV, STB, VCR, CABLE, DVD
PLAYER
DIRECT CHANNEL SELECTION
ONE ORTWO-DIGIT CHANNEL
SELECTION/ SWITCH REPEATEDLY BETWEEN THE
TELETEXT STORE
LAST TWO CHANNELS DISPLAYED
VOLUME INCREASE NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TEMPORARY SOUND SWITCH-OFF TELETEXT MODE (LIST/FLOF)
SELECTION
VOLUME DECREASE PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION INFORMATION DISPLAY/
AND THE NORMAL BROADCAST TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
SOUND EFFECT SELECTIOND CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
SURROUND ON/OFF DIRECTLY SOUND MODE SELECTION
SELF FOCUS FASTEXT TOPIC SELECTION
PICTURE FREEZE AUTOMATIC SWITCH-OFF
TELETEXT SUB-PAGE VCR/DVD FUNCTIONS;
- REWIND ( )
REMOTE CONTROL SETUP - STOP ( )
- PLAY/PAUSE ( )
- FAST FORWARD ( )
TELETEXT CANCEL
IF YOUR REMOTE CONTROL IS TELETEXT PAGE HOLD
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-INSERT
THE BATTERIES AND TRY USING
THE REMOTE CONTROL AGAIN.
The performance of the remote control may be affected by bright light.
9
Connecting to an Aerial or Cable Television Network
ENG
To view television channels correctly, a signal must be received by
the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
1 In the first three cases, connect the aerial or network input cable to
Rear of the TV the 75 coaxial socket on the rear of the television.
2 If you are using an indoor aerial, you may need to turn it when
or tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
Cable Television
Network "Storing Channels Automatically" on page 20.
"Storing Channels Manually" on page 22.
10
Connecting a Satellite Receiver or Decoder
ENG
In order to watch television programmes broadcast via a Rear of the TV
satellite network, you must connect a satellite receiver to
the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder to the
rear of TV.
Using a SCART cable
Connect the receiver (or decoder) SCART cable to one
of the SCART connectors on the rear of the television.
Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
If you wish to connect both a satellite receiver Satellite receiver/
(or decoder) and a VCR, you should connect the: Decoder
Receiver (or Decoder) to the VCR
VCR to the television
Otherwise, connect the receiver (or decoder) directly
to the television.
11
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of your television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2 Press the " I " button (On/Off) on the front or side of the television.
Result: The Standby indicator on the front of the television
lights up.
3 Press the POWER ( ) button on the remote control to switch
the television on.
Result: The programme that you were watching last is re-
selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
20 or "Storing Channels Manually" on page 22.
4 To switch your television off, press the " I " button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1 Press the POWER ( )button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2 To switch the television back on, simply press the POWER ( )
button again.
You can also switch on by pressing the TV ( ) or P /
button.
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the " I "
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
12
Becoming Familiar with the Remote Control
ENG
The remote control is used mainly to:
Change channels and adjust the volume
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the -
previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
-/-- Used to select a channel numbered ten or over.
Press this button, and the "--" symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
( ) channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the -
volume.
MUTE Used to switch the sound off temporarily.
( ) To turn the sound back on, press this button again, or
press the or button.
MENU Used to display the Used to return to the previous
( ) on-screen menu system. menu or normal viewing.
- Used to:
Display a submenu
containing selections for
the current menu option.
Increase/decrease a
menu option value.
- Used to confirm your choice.
TV Used to switch the Used to exit from the menu
( ) television on when it is system and return to normal
in Standby mode. viewing directly.
EXIT - Used to exit from the any
( ) disply.
13
Plug and Play Feature
ENG
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
Plug & Play
settings are available.
Start Plug & Play
OK
Enter Return
1 If the television is in Standby mode, press the POWER ( )
button on the remote control.
Result: The message Start Plug & Play is displayed.
TV Setup
Time English 2 To start the Plug & Play, press the ENTER ( ) button.
Deutsch
Plug & Play Fran◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo