Service Manuals, User Guides, Schematic Diagrams or docs for : Samsung Monitor Samsung_PN43D450_Precautions_[SM]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Samsung_PN43D450_Precautions_[SM] documenatation <<

Text preview - extract from the document

                                                                                                              1. Precaution



1. Precaution
To avoid possible damage, electric shocks or exposure to radiation, follow the instructions below with regard to safety,
installation, service and ESD.




1.1. Safety Precautions

1) Make sure all protective devices are properly installed including non-metallic handles and compartment covers when
   installing or re-installing the chassis or chassis assemblies.

2) Make sure that no gaps exist between the cabinets for children to insert their fingers in to prevent children from
   receiving electric shocks. Gaps mentioned above include ventilation holes of a too great magnitude between the PDP
   module and the cabinet mask, and the improper installation of the rear cabinet.
    Errors may occur when the resistance is below 1.0M or over 5.2M. In these cases, make sure that the device is
    repaired before sending it back to the customer.

3) Check for Electricity Leakage (AC Leakage Test)

           WARNING

     Do not use an insulated transformer for checking the leakage. Use only those current leakage testers or mirroring
     systems that comply with ANSIC 101.1 and the Underwriter Laboratory's specifications (UL1410, 59.7).




                                    LEAKAGE ( R E A D I N G
          DEVICE                    CURREN T SHOULD NOT BE
          UNDER                      TESTER ABOVE 0.5mA)
           TEST
                      TES T ALL
                   EXPOSED ME TAL
                     SUR FACES
             2-WIRE CORD
            ALSO TES T WITH
            PLUG REVERSED
               (US ING AC                        EARTH
             ADAPTER PLUG                       GROUND
             AS REQU IRED)


    Figure 1.1 AC Leakage Test

4) A high voltage is maintained within the specified limits using safety parts, calibration and tolerances. When voltage
   exceeds the specified limits, check each special part.

5) Warning for Engineering Changes:
    Never make any changes or additions to the circuit design or the internal part for this product.
    Ex: Do not add any audio or video accessory connectors. This might cause physical damage.
    Furthermore, any changes or additions to the original design/engineering will invalidate the warranty.

6) Warning - Hot Chassis:
    Some TV chassis are directly connected to one end of the AC power cord for electrical reasons. Without insulated
    transformers, the product can only be repaired safely when the chassis is connected to the earthed end of the AC
    power source.
    To make sure the AC power cord is properly connected, follow the instructions below. Use the voltmeter to measure the
    voltage between the chassis and the earthed ground. If the measurement is over 1.0V, unplug the AC power cord and
    change the polarity before reinserting it. Measure the voltage between the chassis and the ground again.




Copyright

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo