Service Manuals, User Guides, Schematic Diagrams or docs for : Sharp Monitor Sharp_repair_tips

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.



>> Download Sharp_repair_tips documenatation <<

Text preview - extract from the document
================================================================================
MODEL:      LC-32SD1E and probably other LC-xxSD1E where xx is screen size (in)
--------------------------------------------------------------------------------
FAULT:      Red, green or blue tinting in dark areas
--------------------------------------------------------------------------------
DIAGNOSIS:  None
--------------------------------------------------------------------------------
FIX:        With the set in STANDBY (RED LED lit) press and hold on the top 
	    controls CH- and INPUT.
	    
	    Then press POWER switch down and wait 10 seconds. Release CH- and 
	    input. The set will them power up normally. A small "K" will shortly 
	    appear in the top corner of the screen. 
	    
	    Then press VOL- and CH- on the top controls, the service menu should 
	    come up.
	    
	    Scan through the menu pages using the UP and DOWN d-pad controls. 
	    Scan through until you find the page with "EEP CLEARB". Select it 
	    using the channel buttons. Do not select "EEP CLEAR"; it must be the 
	    "B" variant. Press volume up to select and then enter, wait a few 
	    seconds and it should be done.
	    
	    Then scroll through the rest of the menus and select "FACTORY INI"; 
	    select Euro for European version, haven't tried other things yet. 
	    Execute the option and wait about 10 seconds. Then power off the TV, 
	    and power it back on again. You'll need to retune it, but it should 
	    work fine.
================================================================================



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo