Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA Copiers 2060_2860_2870 2060_orig PDF MG2012

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
MG2012

>> Download MG2012 documenatation <<

Text preview - extract from the document

SERVICE MANUAL
SORTER MG-2012
Click the Page Only button to close the overview area of the window.

Click the Bookmarks and Page button to open the Contents and
display bookmarks created for the document. Click a bookmark's name
to go to the Page marked by that bookmark.

Click the Thumbnails and Page button to open the overview area and
display thumbnail images of each document page. Click a thumbnail to
go to the page marked by that thumbnail.

The installation and service should be done by a qualified service technician.
1. When installing the Stapler Sorter MG-2012 to the Plain Paper Copier, be sure to follow the instructions
described in the "Unpacking/Set-Up Procedure for the MG-2012" booklet which comes with each unit of the
MG-2012.
2. The MG-2012 should be installed by an authorized/qualified person.
3. Before starting installation, servicing or maintenance work, be sure to unplug the copier first.
4. When servicing or maintaining the MG-2012, be careful about the rotating or operating sections such as
gears, pulleys, sprockets, cams, belts, etc.
5. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
noted in this manual or other related materials. Be careful not to assemble small parts such as screws,
washers, pins, E-rings, toothed washers to the wrong places.
6. Basically, the machine should not be operated with any parts removed or disassembled.
7. Delicate parts for preventing safety hazard problems (such as breakers, thermofuses, fuses, door switches,
sensors, etc. if any) should be handled/installed/adjusted correctly.
8. Use suitable measuring instruments and tools.
9. During servicing or maintenance work, be sure to check the serial No. plate and other cautionary labels (if
any) to see if they are clean and firmly fixed. If not, take appropriate actions.
10. The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband, because
the ICs on it may be damaged due to static electricity. Before using the wrist band, pull out the power cord
plug of the copier and make sure that there is no uninsulated charged objects in the vicinity.
11. For the recovery and disposal of used MG-2012s, consumable parts and packing materials, it is recom-
mended that the relevant local regulations/rules should be followed.
12. When the sorter is to be carried, be sure to have two persons do this, holding the locations shown in the
figures.

13. Install the sorter as shown in the figure below making sure that the cord is not nipped.

I. FEATURES ----------------------------------- 1-1 III. NAMES OF PARTS ------------------------- 1-4
II. SPECIFICATIONS -------------------------- 1-2 IV. OPERATING THE MACHINE ------------ 1-6
1.GENERAL DESCRIPTION

I. FEATURES
1. Light, Compact Design
This sorter has been designed to be lighter and more compact than conventional 20-bin stapler sorters.
It uses less parts and features the same stacking performance as conventional sorters. At the same
time, reliability and serviceability have been improved.

2. Applicable on a Wide Variety of Models
This sorter employs a straight path as its paper-feeding system, which allows it to be used on a wide
variety of copiers.

1-1
1.GENERAL DESCRIPTION

II. SPECIFICATIONS
Item Specifications

Stacking Face up
Moving bin slot
Copy paper type Plain (64 to 200 g/m2)
A5-R/ST-R to A3/LD
Number of bins 20 bins
Stacking volume per bin Non sort mode: 100 sheets
Sort mode: 50 sheets (A4, LT-R, B5, A5, ST-R, A4-R, LT, B5-R)
25 sheets (A3, LD, B4, LG)
Group mode: 30 sheets (A4, LT, B5, A5-R, ST-R, A4-R, LT-R, B5-R)
25 sheets (A3, LD, B4, LG, LT)
Cascade mode: 600 sheets (A4-R, A4, B5-R, B5, A5, LT-R, LT, ST-R)
500 sheets (A3, B4, LD, LG)
Bin shift time 10 sec (approx.; from 20th bin to bin home position)
Control panel Staple key
Display Stapling Ready, Add Staple
Stapling method Punching by rotating cam
Stapling position

6mm Feeding direction

6mm

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo