Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA Copiers 2060_2860_2870 2060_orig PDF KD1003SM

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download KD1003SM documenatation <<

Text preview - extract from the document

SERVICE MANUAL KD-1003/2009
    PAPER FEED PEDESTAL




   Click the Page Only button to close the overview area of the window.



   Click the Bookmarks and Page button to open the Contents and
   display bookmarks created for the document. Click a bookmark's name
   to go to the Page marked by that bookmark.

   Click the Thumbnails and Page button to open the overview area and
   display thumbnail images of each document page. Click a thumbnail to
   go to the page marked by that thumbnail.

   Copyright TOSHIBA CORPORATION 1996
   ALL RIGHTS RESERVED
  GENERAL PRECAUTIONS FOR INSTALLATION/SERVICING/
  MAINTENANCE

1. When installing the Paper Feed Pedestal KD-1003/2009 to the Copier, be sure to follow the instruc-
   tions described in the "Unpacking /Set-Up Procedure for the KD-1003/2009" booklet which comes
   with each unit of the KD-1003/2009.
   Caution: Be extremely careful when lifting and placing the copier onto the KD-1003/2009.




                            4 positions


2. The KD-1003/2009 should be installed by an authorized/qualified person.
3. Before starting installation, servicing or maintenance work, be sure to turn off and unplug the copier
   first.
4. The KD-1003/2009 is supplied with power from the copier, requiring no additional power source.
5. The KD-1003/2009 should be grounded to the specified positions on the machine frame.
6. When servicing or maintaining the KD-1003/2009, be careful about the rotating or operating sections
   such as gears, pulleys, sprockets, cams, belts, etc.
7. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
   noted in this manual or other related documents. Be careful not to reassemble small parts such as
   screws, washers, pins, E-rings, toothed washers to the wrong places.
8. Basically, the machine should not be operated with any parts removed or disassembled.
9. Delicate parts for preventing safety hazard problems (such as thermofuses, door switches, sensors,
   etc. if any) should be handled/installed/adjusted correctly.
10. During servicing or maintenance work, be sure to check the nameplate and other cautionary labels (if
   any) to see if they are clean and firmly stuck. If not, take appropriate actions.
11. Use suitable measuring instruments and tools.
12. The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
   because the ICs on it may be damaged due to static electricity.
13. For the recovery and disposal of used KD-1003/2009s, consumable parts and packing materials, it is
   recommended that the relevant local regulations/rules should be followed.



                                           

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo