Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA Copiers E 16 Service manual (eng) copy MY-1016+(SFB)

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MY-1016+(SFB) documenatation <<

Text preview - extract from the document

                    STACK FEED BYPASS

                    MY-1016




File No. 31100017
General Precautions for Installation/Servicing/Maintenance for the MY-1016


The installation and service should be done by a qualified service technician.
1.   When installing the MY-1016 to the Plain Paper Copier, be sure to follow the instructions described in
     the "Unpacking/Set-Up Procedure for the MY-1016" booklet which comes with each unit of the
     MY-1016.
2.   The MY-1016 should be installed by an authorized/qualified person.
3.   Before starting installation, servicing or maintenance work, be sure to turn off and unplug the copier
     first.
4.   When servcing or maintaining the MY-1016, be careful about the rotating or operation sections such
     as gear, pulleys, sprockets, cams, belts, etc.
5.   When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
     noted in this manual or other related materials. Be careful not to reassemble small parts such as
     screws, washers, pins, E-rings, toothed washers to the wrong places.
6.   Basically, the machine should not be operated with any parts removed or disassembled.
7.   Delicate parts for preventing safety hazard problems (such as breakers, thermofuses, fuses, door
     switches, sensors, etc. if any) should be handled/installed/adjusted correctly.
8.   Use suitable measuring instruments and tools.
9.   During servicing or maintenance work, be sure to check the serial No. plate and other cautionary
     labels (if any) to see if they are clean and firmly fixed. If not, take appropriate actions.
10. The PC board must be stored in an anti-electrostatic bag and handled carefully using a wristband,
    because the ICs on it may be damaged due to static electricity. Before using the wrist band, pull out
    the power cord plug of the copier and make sure that there is no uninsulated charged objects in the
    vicinity.
11. For the recovery and disposal of used MY-1016, consumable parts and packing materials, it is rec-
    ommended that the relevant local regulations/rules should be followed.
12. After completing installation, servicing and maintenance of the MY-1016, return the MY-1016 to its
    original state, and check operation.




                                            Copyright 2000



                                  TOSHIBA TEC CORPORATION
                                                        CONTENTS

1. SPECIFICATIONS ...................................................................................................... 1-1
2. OUTLINE .................................................................................................................... 2-1
     2.1 Names of Various Components ......................................................................................... 2-1
     2.2 Layout of Electrical Parts .................................................................................................. 2-2
     2.3 Harness Connection Diagram ............................................................................................ 2-3

3. OPERATIONAL DESCRIPTION ................................................................................ 3-1
     3.1 General Operation ............................................................................................................. 3-1
     3.2 Block Diagram .................................................................................................................. 3-1
     3.3 Detection of Abnormal Status ........................................................................................... 3-2
            3.3.1 Paper jam detection ............................................................................................... 3-2
     3.4 Flow Charts ...................................................................................................................... 3-3

4. MECHANICAL DESCRIPTION.................................................................................. 4-1
     4.1 Paper Feed System .......................................................................................................... 4-1
     4.2 Drive System .................................................................................................................... 4-2

5. CIRCUIT DESCRIPTION ........................................................................................... 5-1
     5.1 Meaning of Signals ........................................................................................................... 5-1
     5.2 Timing Chart ..................................................................................................................... 5-2

6. DISASSEMBLY AND REPLACEMENT ..................................................................... 6-1




October 2000 

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo