Service Manuals, User Guides, Schematic Diagrams or docs for : TOSHIBA DVD-Video D-VR4 hfe_toshiba_d-vr4-su-sc_user_service_en
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download hfe_toshiba_d-vr4-su-sc_user_service_en documenatation <<
Text preview - extract from the document
FILE NO. 810-200521
SERVICE MANUAL
Hi-Fi VCR & DVD VIDEO
RECORDER
D-VR4SU
D-VR4SC
DOCUMENT CREATED IN JAPAN, March, 2005
Limited warranty (continued)
How to Obtain Warranty Services THIS WARRANTY GIVES YOU SPECIFIC LEGAL
Introduction
If, after following all of the operating instructions in this RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS 2
manual and checking the section "Troubleshooting," you WHICH MAY VARY FROM STATE TO STATE IN THE
find that service is needed: U.S.A. SOME STATES OF THE U.S.A. DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
Various settings
(1) For instructions on how to obtain warranty service for LASTS, WHEN AN ACTION MAY BE BROUGHT, DIGITAL VIDEO 23
your DAV Product, contact TACP's Consumer Solution OR THE EXCLUSION OR LIMITATION OF INCIDENTAL
Center toll free at 1-800-631-3811. OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
PROVISIONS MAY NOT APPLY TO YOU UNDER
(2) You must include a copy or original bill of sale or other SUCH CIRCUMSTANCES. Disc playback
33
proof of purchase along with the entire DAV Product to
Hi-Fi VCR & DVD VIDEO RECORDER
the Depot Warranty Repair Center specified by the
TACP Consumer Solutions Center. You are
responsible for all inbound transportation and Tape playback
insurance charges for the DAV Product to the Depot
48
D-VR4SU
Warranty Repair Center specified by the TACP
Consumer Solutions Center.
Recording
For additional information, visit TACP's website: 52
www.tacp.toshiba.com
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A., INCLUDING THE IMPLIED
OWNER'S MANUAL Editing the disc
62
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
LIMITED TO THE DURATION OF THE LIMITED
Dubbing
WARRANTIES SET FORTH ABOVE. WITH THE 77
EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY
LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE
Additional information
AND IN LIEU OF ALL OTHER WARRANTIES, 80
GUARANTEES, AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TACP WITH RESPECT TO THE
REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, LOST PROFITS, BUSINESS
INTERRUPTION, OR MODIFICATION OR ERASURE OF
RECORDED DATA CAUSED BY USE, MISUSE OR
INABILITY TO USE THIS DAV PRODUCT).
No person, agent, distributor, dealer, or company is
authorized to change, modify, or extend the terms of these
warranties in any manner whatsoever. The time within
which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any
statute or law of the United States or any state thereof is
hereby limited to ninety (90) days from the date you
discover, or should have discovered, the defect. This
limitation does not apply to implied warranties arising
under state law.
This device does not tape-record copy protected DVD Video Discs.
Printed in Thailand
88
Introduction
SAFTY PRECAUTIONS IMPORTANT SAFEGUARDS
The lightning flash with arrowhead symbol, within an 1. READ INSTRUCTIONS
CAUTION equilateral triangle is intended to alert the user to the All the safety and operating instructions should be read before the unit is operated.
RISK OF ELECTRIC SHOCK
DO NOT OPEN presence of uninsulated dangerous voltage within the
2. RETAIN INSTRUCTIONS
product's enclosure that may be of sufficient magnitude to
Introduction
constitute a risk of electric shock to persons. The safety and operating instructions should be retained for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER 3. HEED WARNINGS
(OR BACK). NO USER-SERVICEABLE The exclamation point within an equilateral triangle is All warnings on the unit and in the operating instructions should be adhered to.
PARTS INSIDE. REFER SERVICING TO intended to alert the user to the presence of important
QUALIFIED SERVICE PERSONNEL.
4. FOLLOW INSTRUCTIONS
operating and maintenance (servicing) instructions in the
literature accompanying the appliance. All operating and use instructions should be followed.
5. CLEANING
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
or moisture. Use a soft dry cloth for cleaning the exterior cabinet only.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN 6. ATTACHMENTS
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN The manufacturer of this unit does not make any recommendations for attachments, as they may cause
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. hazards.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, 7. WATER AND MOISTURE
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
against harmful interference in a residential installation. This equipment generates, uses and can
basement, or near a swimming pool. PORTABLE CART WARNING
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
8. ACCESSORIES (symbol provided by RETAC)
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
equipment does cause harmful interference to radio or television reception, which can be deter- The unit may fall, causing serious injury, and serious damage to the unit.
mined by turning the equipment off and on, the user is encouraged to try to correct the interfer- 8A. An appliance and cart combination should be moved with care. Quick stops,
ence by one or more of the following measures: excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
- Reorient or relocate the receiving antenna. 9. VENTILATION
- Increase the separation between the equipment and receiver. Slots and openings in the cabinet back or bottom are provided for ventilation,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is S3125A
to ensure reliable operation of the unit, and to protect it from overheating.
connected. These openings must not be blocked or covered. The openings should never be blocked by placing the unit
- Consult the dealer or an experienced radio/TV technician for help.
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the
ventilation is provided and/or the manufacturer's instructions have been adhered to.
FCC Rules could void the user's authority to operate this equipment.
10. POWER SOURCE
CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CARE- 11. GROUNDING OR POLARIZATION
FULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTE- This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
NANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLO- Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
SURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
DO NOT STARE INTO BEAM.
where they exit from the appliance.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2 3
Introduction
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS
13. LIGHTNING 19. REPLACEMENT PARTS
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, When replacement parts are required, be sure the service technician uses replacement parts specified by
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the the manufacturer or those that have the same characteristics as the original part.
unit due to lightning and power line surges. Unauthorized substitutions may result in fire, electric shock or other hazards.
Introduction
20. SAFETY CHECK
14. POWER LINES
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
determine that the unit is in proper operating condition.
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an 21. HEAT
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
as contact with them might be fatal. products (including amplifiers) that produce heat.
15. OVERLOADING 22. DISC TRAY
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
16. OBJECT AND LIQUID ENTRY 23. CONNECTING
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other equip-
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
ment carefully and follow the instructions when making any connections.
17. OUTDOOR ANTENNA GROUNDING
24. LASER BEAM
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the laser beam. It may cause sight damage.
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast 25. DISC
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for personal injury and product malfunction.
the grounding electrode. 26. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC that
EXAMPLE OF ANTENNA GROUNDING AS PER THE provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-
NATIONAL ELECTRICAL CODE nected to the grounding system of the building, as close to the point of cable entry as practical.
CONDENSATION
ANTENNA LEAD IN WIRE Moisture will form in the operating section of the DVD/VCR if the unit is brought from cool surroundings into a warm
room or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performance will be
impaired.
GROUND CLAMP To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or make
sure that the room temperature rises gradually.
ANTENNA Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air conditioner.
DISCHARGE UNIT In such cases, change the location of the DVD/VCR.
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT GROUNDING CONDUCTORS * This product incorporates copyright protection technology that is protected by method claims of certain U.S.
(NEC SECTION 810-21) patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
GROUND CLAMPS Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
Reverse engineering or disassembly is prohibited.
NEC-NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H) Consumers should note that not all high definition television sets are fully compatible with this product and
S2898A
may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is
recommended that the user switch the connection to the "STANDARD DEFINITION" output. If there are
18. SERVICING
questions regarding our TV set compatibility with this model 525p DVD player, please contact our customer
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
service center.
voltage or other hazards. Refer all servicing to qualified service personnel.
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of
For example:
Dolby Laboratories.
a. When the power-supply cord or plug is damaged.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water. * Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to copyright laws.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions, as an improper adjustment of other controls may result in damage * Certain audio features of this product manufactured under a license from Desper Products, Inc. Spatializer◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo