Service Manuals, User Guides, Schematic Diagrams or docs for : TRACE ELLIOT Tec150 TEK150

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download TEK150 documenatation <<

Text preview - extract from the document

                  TRACE ELLIOT
    SERVICE MANUAL NO. SM00022
                        ISSUE 1


Date:                 October 28, 1996
Product Code :        T1400
Model No :            TEK 150
Technical File No :   TE00022




                                         Issued by:

                             Trace Elliot Limited.
                       Blackwater Trading Estate
                          The Causeway, Maldon
                                Essex CM4 4GG.
Important Notice

To make the bi-polar 300 watt bass board reliable the following guidelines
must be adhered to.

When a board need to be serviced it is advisable to replace both the Output
Transistors and TIP31 and TIP32. Also it is advisable to replace TR11 which
is situated under the rear of the heatsink.

The Output device should only be T2SC4468 and T2SA1695's
The Drivers should be of the same manufacturer as each other to ensure
stability.
And TR11 is a T2N3904 as listed on the parts list.
TR11 need to be completely covered in Heat Transfer Compound (HTC)
This is to ensure that it keeps the unit biased correctly even when the unit
gets hot. If TR11 is not covered then the fan can cool this component down
and give the board a fault reading of temperature and provide and
inappropriate bias.

When adjusting the bias on the scope, make sure that the crossover distortion
is just not visible. Too far beyond this point will over bias the unit.

Use a Shake-proof washer under the pcb earth point to ensure a permanent
connection and prevent crackling noises in the future.

Paul Mathews

Jan 2000-01-25

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo