Service Manuals, User Guides, Schematic Diagrams or docs for : Tektronix TDS7000 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 TekScope_Opt_App_1.0.10_071-1883-01_063-3914-10 Applications 03_DPOPWR Readme

Date: 10th Aug, 2007
Product: DPOPWR (Power Measurement and Analysis Software)
Version: 1.0.6
     
===========================================================

What is in this Readme File:
     
1.  System Requirements
2.  Contents of Distribution
3.  Features Additions
4.  Known Limitations
5.  Known Defects
6.  Installation
7.  Contact Information

===========================================================

1. System Requirements

- Note that the best MS Windows(TM) task bar settings for
  running this application are:
	Always on top 	= unchecked
    	Auto Hide 	= unchecked

- The DPOPWR Application is targeted towards DPO7000 and, DPO/DSA70000 
   series oscilloscopes.

- The use of a keyboard and a mouse is recommended.  For all file-based
  usage, these are required.

- The oscilloscope firmware version required for this release 
  are as below: 
   
 Model Number					Firmware

 DPO & DSA scopes 				v4.0.0 and above			
  

- The latest version of the software can be downloaded from the 
  Tektronix website at http://www.tektronix.com   Click on the
  "Software & Drivers" link on the right side of the screen.

- Disk space requirements:

  55 MB of free disk space to install and operate this application

===========================================================

2. Contents of Distribution

 Directory listing of C:\Program Files\TekApplications\DPOPWR

View.dll
Model.dll
PWRMPKControl.dll
DPOPWR.chm
Report_Generator.chm
DPOPWR.fdb
DPOPWR.pdf
Report_Generator.pdf
SRM.xml
Version.txt
License.txt
Readme.txt
DPOPWR_tpq_rgpib.c

 Directory listing of C:\TekApplications\DPOPWR\Deskew

Probe_Delay.pds

 Directory listing of C:\TekApplications\DPOPWR\ReportGenerator\Layouts

Input_Output_Analysis.rpl
Power_Device.rpl
Total_Power_Quality.rpl
Total_Power_Quality_Amd14.rpl
Current_Harmonics.rpl
Current_Harmonics_Amd14.rpl
Magnetics.rpl

 Directory listing of C:\TekApplications\DPOPWR\ReportGenerator\Templates

Clock_Period.rgt
Current_Harmonics_Amd14_Page2.rgt
Current_Harmonics_Amd14_Page3.rgt
Current_Harmonics_Amend14_Page2.rgt
Current_Harmonics_Page1.rgt
Current_Harmonics_Page2.rgt
Current_Harmonics_Page3.rgt
Current_Harmonics_Page4.rgt
di_dt.rgt
Duty_Cycle.rgt
dv_dt.rgt
Dynamic_Resistance.rgt
Frequency.rgt
HiPower_finder.rgt
Power_Quality.rgt
Pulse_Width.rgt
Ripple_Line.rgt
Ripple_Switching.rgt
SOA.rgt
SOA_DPO.rgt
Spectral_Analysis.rgt
Switching_Loss.rgt
Total_Power_Quality_Amd14_Page2.rgt
Total_Power_Quality_Amd14_Page3.rgt
Total_Power_Quality_Amend14_Page2.rgt
Total_Power_Quality_Page1.rgt
Total_Power_Quality_Page2.rgt
Total_Power_Quality_Page3.rgt
Total_Power_Quality_Page4.rgt
Turn_On_Time.rgt
IvsIntegralV.rgt
Magnetic_Loss.rgt
Magnetic_Property.rgt
Inductance.rgt

 Directory listing of C:\TekApplications\DPOPWR\SOA\Masks

SOA_Mask.msk

 Directory listing of C:\TekApplications\DPOPWR\Waveforms

ref1vol.wfm
ref2cur.wfm
switchCurrent.wfm
switchVoltage.wfm

===========================================================

3. Feature Additions 

Features in version 1.0.6
    No customer feature beyond 1.0.5

Features in version 1.0.5
    No customer feature beyond 1.0.4

Features in version 1.0.4
    Support for 20XL option

Features in version 1.0.3
    Defect fixes
    Support for  DPO/DSA scope models (12.5 GHz and above)


Features in version 1.0.2

    Remote-GPIB feature is supported.
    Screen Capture defect fixes
    Support for  DPO/DSA70404,DPO/DSA70604,DPO/DSA70804 scope models

		
Features in version 1.0.0

 1. HiPower Finder and Magnetics Pinpoint the Source of Reliability Problems 
 2. Power Loss Measurements at the Switching Device and Magnetic Component 
     Improve Switching Power Supply Efficiency 
 3. Sophisticated Report Generation Saves Time 
 4. Customizable Safe Operating Area Mask Testing with Linear and Log Scale for 
     Reliability Testing 
 5. In-circuit Bpeak, Permeability, and Coercive Force Measurements Determine 
     the Reliability of the Magnetic Component 
 6. Automatic Ripple Measurement Setup Eliminates Manual Processes 
 7. Spectral Analysis Locates Ripple and Noise on the Output Voltage and EMI Issues 
     with the Switching Power Supply 
 8. Pre-compliance Testing to the EN61000-3-2, EN61000-3-2 AM14, and MIL 1399 (400 Hz) 
     Standards Reduces Compliance Test Time and Risk 
 9. Automated THD, True Power, Apparent Power, Power Factor, and Crest Factor 
     Features Eliminate Tedious Manual Calculations 
10. Modulation Analysis Quickly Provides Accurate Active Power Factor Characterization 
11. Automatic Deskew Ensures Accurate, Time-correlated Results 
12. Correct Scale Factor and Unit Display While Using Third Party Current Probes 
     Eliminates Manual Calculations and Human Error 

===========================================================

4. Known Limitations

- Before switching to another application,ensure that no measurements are running.
  Switching applications while a measurement is running may cause the system to stop responding. 

- Combining the manual and RGPIB modes may cause the application to behave unexpectedly. 

- Report Generator scope screenshots might not appear clear on the oscilloscope.
  However, the prints of the screenshots are clear.

- Changing scale in SOA Mask editor clears the already drawn mask.

===========================================================

5. Known defects

- None
  
===========================================================

6. Installation 

 Normally, the DPOPWR application resides on the hard drive of
 your oscilloscope. If the application is not installed on hard disk,
 perform the following steps to install the application from
 the Optional Applications Software on a Windows-based Oscilloscope
 CD or DVD:

  1. If the keyboard is not installed, connect it to the oscilloscope rear   
     panel (the optional-accessory keyboard plugs into the USB connector)

  2. Power on the oscilloscope to start Windows

  3. Insert the optional applications software CD/DVD in the CD or DVD drive
     of the oscilloscope

  4. The autorun utility will start the installation program

  5. Select the option 'Power Measurement and Analysis Software'

  6. Select the option 'INSTALL NOW'

  7. You will need to enter the authorized Option Installation Key to enable
     the application. The key is specific to the serialized oscilloscope and
     options for which it was purchased.  Do not enter this key until all 
     application software that you have purchased has been installed. To
     enter the key number, follow these steps:

    a. Power on the oscilloscope,the TekScope application will launch in Menu mode
    b. Go to the Utilities menu in the menu bar and select Option
       Installation.
    c. Follow the on-screen instructions to enter the alphanumeric key
       number exactly as it is printed on the rear-panel label.

 NOTE: 
     1. If the autorun utility fails to start in step 4, then select the My Computer icon.
     In the Exploring My Computer window, select the drive letter associated with the
     CD or DVD (for example, D:) drive.  Select the file LAUNCH.EXE to start the
     installation program.  Complete the installation process by performing steps
     5 to 7 as mentioned above.
 
     The DPOPWR application is now ready for use. Start the application by
     using ANALYZE -> Power Analysis or Measure ->Power Analysis menu selection on the oscilloscope menu.

     2. The Report Generator feature requires the IVI components to be installed. 
     Ensure that the latest version is installed on the oscilloscope correctly. 
     Follow these steps in case you have problems using Report Generator through 
     DPOPWR (e.g., if you see messages like "Failed to create TekScope instance"):
     a. Uninstall IVI Drivers from Add/Remove Programs
     b. Reboot the oscilloscope 
     c. Uninstall IVI Shared Components by running CleanupUtility.exe
       at "C:\ProgramFiles\Tektronix\IVISharedComponentInstall"
     d. Reboot the oscilloscope
     e. Uninstall TekScope Firmware and reboot the oscilloscope
     f. Install TekScope Firmware and reboot the oscilloscope

===========================================================

7. Contact Information

-- Telephone:

   Contact your local Tektronix Representative at 1-800-833-9200 
 	Sales support     	select option 1
	Service support		select option 2
	Technical support 	select option 3

-- WEB:
	
	http://www2.tek.com/wwwcontact/plsql/Contact.Us	

-- e-mail:

	[email protected]

---End of File---